東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

FindBook

Google Book

Amazon

博客來

Uv-Curable Hybrid Sol-Gel Materials: The Development and Application of a 3-Methacryloxypropytrimethoxysilane-Derived Coating.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Uv-Curable Hybrid Sol-Gel Materials: The Development and Application of a 3-Methacryloxypropytrimethoxysilane-Derived Coating./
作者:	Scotland, Kevin M.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:	174 p.
附註:	Source: Dissertations Abstracts International, Volume: 82-07, Section: B.
Contained By:	Dissertations Abstracts International82-07B.
標題:	Materials science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28256667
ISBN:	9798557040891

Uv-Curable Hybrid Sol-Gel Materials: The Development and Application of a 3-Methacryloxypropytrimethoxysilane-Derived Coating.
Scotland, Kevin M.

Uv-Curable Hybrid Sol-Gel Materials: The Development and Application of a 3-Methacryloxypropytrimethoxysilane-Derived Coating. - Ann Arbor : ProQuest Dissertations & Theses, 2021 - 174 p.

Source: Dissertations Abstracts International, Volume: 82-07, Section: B.

Thesis (Ph.D.)--Trent University (Canada), 2021.

This item must not be sold to any third party vendors.

This thesis describes the synthesis, application and evaluation of a UV crosslinked 3-methacryloxypropyltrimethoxysilane-derived coating formulation. This is a two-component sol-gel system with 3-methacryloxypropyltrimethoxysilane (MaPTMS) and tetraethoxysilane (TEOS). Herein we show that if we change the co-solvent required for solubilizing MaPTMS from the more common methanol and ethanol to isopropanol we change the rate of hydrolysis from days or weeks to minutes. With the assistance of 2D 29Si-NMR we demonstrate that the system undergoes extensive condensation in twenty minutes. Using standard UV irradiation, the material can be extensively UV crosslinked with 70% of the methacryloxy functionality being consumed in 5 minutes upon irradiation in the presence of a photo-initiator. When this material is used to coat low carbon steel and immersed in an accelerated corrosion solution (dilute Harrison's solution); this material affords low carbon steel 25 hours of protection when crosslinked and 17 hours of protection when uncrosslinked.The material was then used to encapsulate polyaniline (PANI), an intrinsic conductive polymer used in the corrosion protection of metal substrates. PANI has been encapsulated previously in sol-gel material, but due to the pH dependence of the solubility of PANI, it can not be encapsulated in more commonly chemically crosslinked sol-gel. As our system is UV crosslinked rather than chemically crosslinked, we were able to successfully demonstrate the inclusion of PANI into our coating system.Finally, this thesis includes a thorough computational investigation into the structure and band gap of PANI. Through the analysis of the band gap it was shown that the structure of the polymer commonly displayed in literature is not the correct structure of the polymer. Our results suggest that when PANI is made electrochemically, the oligomer contains two quinoid units next to one another instead of the more usually represented regularly alternating benzoid and quinoid units. The results also suggest that when PANI is made using the oxidant ammonium persulfate, the polymer most likely contains a Michael adduct structure somewhere in the polymer chain which dominates PANI's electronic properties.

ISBN: 9798557040891Subjects--Topical Terms:

543314
Materials science.
Subjects--Index Terms:

3-Methacryloxypropyltrimethoxysilane

Uv-Curable Hybrid Sol-Gel Materials: The Development and Application of a 3-Methacryloxypropytrimethoxysilane-Derived Coating.
LDR:03447nmm a2200361 4500 001 2347120
005 20220719070504.5
008 241004s2021 ||||||||||||||||| ||eng d
020 $a 9798557040891
035 $a (MiAaPQ)AAI28256667
035 $a AAI28256667
040 $a MiAaPQ $c MiAaPQ
100 1 $a Scotland, Kevin M. $3 3686333
245 1 0 $a Uv-Curable Hybrid Sol-Gel Materials: The Development and Application of a 3-Methacryloxypropytrimethoxysilane-Derived Coating.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2021
300 $a 174 p.
500 $a Source: Dissertations Abstracts International, Volume: 82-07, Section: B.
500 $a Advisor: Vreugdenhil, Andrew.
502 $a Thesis (Ph.D.)--Trent University (Canada), 2021.
506 $a This item must not be sold to any third party vendors.
520 $a This thesis describes the synthesis, application and evaluation of a UV crosslinked 3-methacryloxypropyltrimethoxysilane-derived coating formulation. This is a two-component sol-gel system with 3-methacryloxypropyltrimethoxysilane (MaPTMS) and tetraethoxysilane (TEOS). Herein we show that if we change the co-solvent required for solubilizing MaPTMS from the more common methanol and ethanol to isopropanol we change the rate of hydrolysis from days or weeks to minutes. With the assistance of 2D 29Si-NMR we demonstrate that the system undergoes extensive condensation in twenty minutes. Using standard UV irradiation, the material can be extensively UV crosslinked with 70% of the methacryloxy functionality being consumed in 5 minutes upon irradiation in the presence of a photo-initiator. When this material is used to coat low carbon steel and immersed in an accelerated corrosion solution (dilute Harrison's solution); this material affords low carbon steel 25 hours of protection when crosslinked and 17 hours of protection when uncrosslinked.The material was then used to encapsulate polyaniline (PANI), an intrinsic conductive polymer used in the corrosion protection of metal substrates. PANI has been encapsulated previously in sol-gel material, but due to the pH dependence of the solubility of PANI, it can not be encapsulated in more commonly chemically crosslinked sol-gel. As our system is UV crosslinked rather than chemically crosslinked, we were able to successfully demonstrate the inclusion of PANI into our coating system.Finally, this thesis includes a thorough computational investigation into the structure and band gap of PANI. Through the analysis of the band gap it was shown that the structure of the polymer commonly displayed in literature is not the correct structure of the polymer. Our results suggest that when PANI is made electrochemically, the oligomer contains two quinoid units next to one another instead of the more usually represented regularly alternating benzoid and quinoid units. The results also suggest that when PANI is made using the oxidant ammonium persulfate, the polymer most likely contains a Michael adduct structure somewhere in the polymer chain which dominates PANI's electronic properties.
590 $a School code: 0513.
650 4 $a Materials science. $3 543314
650 4 $a Computational chemistry. $3 3350019
650 4 $a Chemical engineering. $3 560457
653 $a 3-Methacryloxypropyltrimethoxysilane
653 $a Corrosion
653 $a Polyaniline
653 $a Tetraethoxysilane
690 $a 0794
690 $a 0542
690 $a 0219
710 2 $a Trent University (Canada). $b Materials Science. $3 3282339
773 0 $t Dissertations Abstracts International $g 82-07B.
790 $a 0513
791 $a Ph.D.
792 $a 2021
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28256667