語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Innovative Thermal Management System...
~
Shoai Naini, Shervin.
FindBook
Google Book
Amazon
博客來
Innovative Thermal Management Systems for Autonomous Vehicles - Design, Model, and Test.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Innovative Thermal Management Systems for Autonomous Vehicles - Design, Model, and Test./
作者:
Shoai Naini, Shervin.
出版者:
Ann Arbor : ProQuest Dissertations & Theses, : 2021,
面頁冊數:
231 p.
附註:
Source: Dissertations Abstracts International, Volume: 82-12, Section: B.
Contained By:
Dissertations Abstracts International82-12B.
標題:
Mechanical engineering. -
電子資源:
https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28415619
ISBN:
9798515203894
Innovative Thermal Management Systems for Autonomous Vehicles - Design, Model, and Test.
Shoai Naini, Shervin.
Innovative Thermal Management Systems for Autonomous Vehicles - Design, Model, and Test.
- Ann Arbor : ProQuest Dissertations & Theses, 2021 - 231 p.
Source: Dissertations Abstracts International, Volume: 82-12, Section: B.
Thesis (Ph.D.)--Clemson University, 2021.
This item must not be sold to any third party vendors.
Emphasis on reducing fossil fuel consumption and greenhouse gas emissions, besides the demand for autonomy in vehicles, made governments and automotive industries move towards electrification. The integration of an electric motor with battery packs and on-board electronics has created new thermal challenges due to the heat loads' operating conditions, design configurations, and heat generation rates. This paradigm shift necessitates an innovative thermal management system that can accommodate low, moderate, and high heat dissipations with minimal electrical or mechanical power requirements. This dissertation proposes an advanced hybrid cooling system featuring passive and active cooling solutions in a thermal bus configuration. The main purpose is to maintain the heat loads' operating temperatures with zero to minimum power requirements and improved packaging, durability, and reliability. In many operating instances, a passive approach may be adequate to remove heat from the thermal source (e.g., electric motor) while a heavy load would demand both the passive and active cooling systems operate together for reduced electric power consumption. Further, in the event of a failure (e.g., coolant hose leak, radiator tube leak) in the conventional system, the passive system offers a redundant operating mode for continued operation at reduced loads. Besides, the minimization of required convective heat transfer (e.g., ram air effect) about the components for supplemental cooling enables creative vehicle component placement options and optimizations. Throughout this research, several cooling system architectures are introduced for electric vehicle thermal management. Each design is followed by a mathematical model that evaluates the steady-state and transient thermal responses of the integrated heat load(s) and the developed cooling system. The designs and the mathematical models are then validated through a series of thermal tests for a variety of driving cycles. Then, the cooling system design configuration is optimized using the validated mathematical model for a particular application. The nonlinear optimization study demonstrates that a 50\\% mass reduction could be achieved for a continuous 12kW heat-dissipating demand while the electric motor operating temperature has remained below 65 centigrade degrees. Next, several real-time controllers are designed to engage the active cooling system for precise, stable, and predictable temperature regulation of the electric motor and reduced power consumption. A complete experimental setup compares the controllers in the laboratory's environment. The experimental results indicate that the nonlinear model predictive control reduces the fan power consumption by 73% for a 5% increase in the pump power usage compared to classical control for a specific 60-minute driving cycle. In conclusion, the conducted experimental and numerical studies demonstrate that the proposed hybrid cooling strategy is an effective solution for the next generation of electrified civilian and combat ground vehicles. It significantly reduces the reliance on fossil fuels and increases vehicle range and safety while offering a silent mode of operation. Future work is to implement the developed hybrid cooling system on an actual electric vehicle, validate the design, and identify challenges on the road.
ISBN: 9798515203894Subjects--Topical Terms:
649730
Mechanical engineering.
Subjects--Index Terms:
Autonomous vehicles
Innovative Thermal Management Systems for Autonomous Vehicles - Design, Model, and Test.
LDR
:04709nmm a2200421 4500
001
2282206
005
20211001100724.5
008
220723s2021 ||||||||||||||||| ||eng d
020
$a
9798515203894
035
$a
(MiAaPQ)AAI28415619
035
$a
AAI28415619
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Shoai Naini, Shervin.
$3
3560975
245
1 0
$a
Innovative Thermal Management Systems for Autonomous Vehicles - Design, Model, and Test.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2021
300
$a
231 p.
500
$a
Source: Dissertations Abstracts International, Volume: 82-12, Section: B.
500
$a
Advisor: Wagner, John;Miller, Richard.
502
$a
Thesis (Ph.D.)--Clemson University, 2021.
506
$a
This item must not be sold to any third party vendors.
520
$a
Emphasis on reducing fossil fuel consumption and greenhouse gas emissions, besides the demand for autonomy in vehicles, made governments and automotive industries move towards electrification. The integration of an electric motor with battery packs and on-board electronics has created new thermal challenges due to the heat loads' operating conditions, design configurations, and heat generation rates. This paradigm shift necessitates an innovative thermal management system that can accommodate low, moderate, and high heat dissipations with minimal electrical or mechanical power requirements. This dissertation proposes an advanced hybrid cooling system featuring passive and active cooling solutions in a thermal bus configuration. The main purpose is to maintain the heat loads' operating temperatures with zero to minimum power requirements and improved packaging, durability, and reliability. In many operating instances, a passive approach may be adequate to remove heat from the thermal source (e.g., electric motor) while a heavy load would demand both the passive and active cooling systems operate together for reduced electric power consumption. Further, in the event of a failure (e.g., coolant hose leak, radiator tube leak) in the conventional system, the passive system offers a redundant operating mode for continued operation at reduced loads. Besides, the minimization of required convective heat transfer (e.g., ram air effect) about the components for supplemental cooling enables creative vehicle component placement options and optimizations. Throughout this research, several cooling system architectures are introduced for electric vehicle thermal management. Each design is followed by a mathematical model that evaluates the steady-state and transient thermal responses of the integrated heat load(s) and the developed cooling system. The designs and the mathematical models are then validated through a series of thermal tests for a variety of driving cycles. Then, the cooling system design configuration is optimized using the validated mathematical model for a particular application. The nonlinear optimization study demonstrates that a 50\\% mass reduction could be achieved for a continuous 12kW heat-dissipating demand while the electric motor operating temperature has remained below 65 centigrade degrees. Next, several real-time controllers are designed to engage the active cooling system for precise, stable, and predictable temperature regulation of the electric motor and reduced power consumption. A complete experimental setup compares the controllers in the laboratory's environment. The experimental results indicate that the nonlinear model predictive control reduces the fan power consumption by 73% for a 5% increase in the pump power usage compared to classical control for a specific 60-minute driving cycle. In conclusion, the conducted experimental and numerical studies demonstrate that the proposed hybrid cooling strategy is an effective solution for the next generation of electrified civilian and combat ground vehicles. It significantly reduces the reliance on fossil fuels and increases vehicle range and safety while offering a silent mode of operation. Future work is to implement the developed hybrid cooling system on an actual electric vehicle, validate the design, and identify challenges on the road.
590
$a
School code: 0050.
650
4
$a
Mechanical engineering.
$3
649730
650
4
$a
Thermodynamics.
$3
517304
650
4
$a
Automotive engineering.
$3
2181195
653
$a
Autonomous vehicles
653
$a
Cooling system nonlinear controls
653
$a
Cooling system optimization
653
$a
Electric vehicles
653
$a
Hybrid cooling
653
$a
Thermal management
653
$a
Thermal bus
653
$a
Energy efficiency
653
$a
Redundancy
690
$a
0548
690
$a
0540
690
$a
0348
710
2
$a
Clemson University.
$b
Mechanical Engineering.
$3
1023734
773
0
$t
Dissertations Abstracts International
$g
82-12B.
790
$a
0050
791
$a
Ph.D.
792
$a
2021
793
$a
English
856
4 0
$u
https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28415619
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9433939
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入