語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Modeling Reaction and Transport Effe...
~
Pritchard, Zachary D.
FindBook
Google Book
Amazon
博客來
Modeling Reaction and Transport Effects in Stereolithographic 3D Printing.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Modeling Reaction and Transport Effects in Stereolithographic 3D Printing./
作者:
Pritchard, Zachary D.
出版者:
Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:
133 p.
附註:
Source: Dissertations Abstracts International, Volume: 82-07, Section: B.
Contained By:
Dissertations Abstracts International82-07B.
標題:
Industrial engineering. -
電子資源:
https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28240240
ISBN:
9798684619106
Modeling Reaction and Transport Effects in Stereolithographic 3D Printing.
Pritchard, Zachary D.
Modeling Reaction and Transport Effects in Stereolithographic 3D Printing.
- Ann Arbor : ProQuest Dissertations & Theses, 2020 - 133 p.
Source: Dissertations Abstracts International, Volume: 82-07, Section: B.
Thesis (Ph.D.)--University of Michigan, 2020.
This item must not be sold to any third party vendors.
Continuous stereolithography has recently emerged as a leading technology in additive manufacturing (3D printing). Though several methods for continuous printing have been reported, they all share the benefit of reducing forces on the growing part and eliminating adhesion to the resin bath due to the introduction of the dead zone, a region where polymerization does not occur. The recently developed dual-wavelength approach, in which photoinitiation and photoinhibition of polymerization are controlled via different wavelengths of light, has achieved unprecedented vertical print speeds via expansion of the dead zone. We address several limitations in dual-wavelength continuous printing (and some within continuous stereolithography more broadly) via theoretical and computational modeling and the use of spatially varying exposure patterns. First, we address the problem of cure-through, undesired curing along the axis of exposure, which is more significant in continuous stereolithography than in traditional layer-by-layer stereolithography. Recognizing that the use of highly absorbing resins to improve layer resolution inherently limits achievable print speeds, we developed a method to improve part fidelity in low- to moderate-absorbance resins through modification of the images projected during printing. We derive a mathematical model to describe dose accumulation during continuous printing, describe the resulting grayscale-based correction method, and experimentally verify correction performance. Using optimized parameters with a high absorbance height resin (2000 um), feature height errors are reduced by over 85% in a test model while maintaining a high print speed (750 mm/h). Recognizing the limitations of this model, we developed a kinetics-based curing model for dual-wavelength photoinitiation/photoinhibition under variable intensities. The model is verified via experimental characterization of two custom resins using cured height and dead zone height experiments. For the two custom resins characterized, the model achieves R2 values of 0.985 and 0.958 for fitting uninhibited cure height data and values of 0.902 and 0.980 for fitting photoinhibited dead zone height data. The model is also applicable to resins in standard layer-by-layer stereolithography, and for commercial resin cure height data, our model performs similarly to the standard Jacobs model, with all R2 values above 0.98. Finally, we introduce the complexities of resin flow during continuous printing. The kinetic curing model is used in a computational fluid dynamics model to analyze dead zone uniformity, which we find is greatly affected by exposure intensity ratio, while print speed and part radius have minor effects. We find that relatively small variations in the intensity ratio (25%) can have large effects, going from good printing conditions to print failure (curing to the window) or to significant nonuniformity (maximum dead zone height over three times the minimum). We optimize exposure conditions to maximize dead zone uniformity, finding that the ability to pattern light sources is critical in generating uniform dead zones: for a 10 mm radius cylinder, over 90% of the dead zone is near the optimized value when using patterned intensity functions, compared with only 18% when using constant intensity values. In printing experiments, we find that an optimized intensity function can, without modification, successfully produce difficult-to-print parts. Taken as a whole, the work advances our understanding of the dual-wavelength approach in continuous stereolithography, improves printing performance, and motivates future research into the wide range of physical phenomena affecting the system.
ISBN: 9798684619106Subjects--Topical Terms:
526216
Industrial engineering.
Subjects--Index Terms:
3D printing
Modeling Reaction and Transport Effects in Stereolithographic 3D Printing.
LDR
:05131nmm a2200445 4500
001
2281897
005
20210927083423.5
008
220723s2020 ||||||||||||||||| ||eng d
020
$a
9798684619106
035
$a
(MiAaPQ)AAI28240240
035
$a
(MiAaPQ)umichrackham003400
035
$a
AAI28240240
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Pritchard, Zachary D.
$3
3560606
245
1 0
$a
Modeling Reaction and Transport Effects in Stereolithographic 3D Printing.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2020
300
$a
133 p.
500
$a
Source: Dissertations Abstracts International, Volume: 82-07, Section: B.
500
$a
Advisor: Burns, Mark A.
502
$a
Thesis (Ph.D.)--University of Michigan, 2020.
506
$a
This item must not be sold to any third party vendors.
506
$a
This item must not be added to any third party search indexes.
520
$a
Continuous stereolithography has recently emerged as a leading technology in additive manufacturing (3D printing). Though several methods for continuous printing have been reported, they all share the benefit of reducing forces on the growing part and eliminating adhesion to the resin bath due to the introduction of the dead zone, a region where polymerization does not occur. The recently developed dual-wavelength approach, in which photoinitiation and photoinhibition of polymerization are controlled via different wavelengths of light, has achieved unprecedented vertical print speeds via expansion of the dead zone. We address several limitations in dual-wavelength continuous printing (and some within continuous stereolithography more broadly) via theoretical and computational modeling and the use of spatially varying exposure patterns. First, we address the problem of cure-through, undesired curing along the axis of exposure, which is more significant in continuous stereolithography than in traditional layer-by-layer stereolithography. Recognizing that the use of highly absorbing resins to improve layer resolution inherently limits achievable print speeds, we developed a method to improve part fidelity in low- to moderate-absorbance resins through modification of the images projected during printing. We derive a mathematical model to describe dose accumulation during continuous printing, describe the resulting grayscale-based correction method, and experimentally verify correction performance. Using optimized parameters with a high absorbance height resin (2000 um), feature height errors are reduced by over 85% in a test model while maintaining a high print speed (750 mm/h). Recognizing the limitations of this model, we developed a kinetics-based curing model for dual-wavelength photoinitiation/photoinhibition under variable intensities. The model is verified via experimental characterization of two custom resins using cured height and dead zone height experiments. For the two custom resins characterized, the model achieves R2 values of 0.985 and 0.958 for fitting uninhibited cure height data and values of 0.902 and 0.980 for fitting photoinhibited dead zone height data. The model is also applicable to resins in standard layer-by-layer stereolithography, and for commercial resin cure height data, our model performs similarly to the standard Jacobs model, with all R2 values above 0.98. Finally, we introduce the complexities of resin flow during continuous printing. The kinetic curing model is used in a computational fluid dynamics model to analyze dead zone uniformity, which we find is greatly affected by exposure intensity ratio, while print speed and part radius have minor effects. We find that relatively small variations in the intensity ratio (25%) can have large effects, going from good printing conditions to print failure (curing to the window) or to significant nonuniformity (maximum dead zone height over three times the minimum). We optimize exposure conditions to maximize dead zone uniformity, finding that the ability to pattern light sources is critical in generating uniform dead zones: for a 10 mm radius cylinder, over 90% of the dead zone is near the optimized value when using patterned intensity functions, compared with only 18% when using constant intensity values. In printing experiments, we find that an optimized intensity function can, without modification, successfully produce difficult-to-print parts. Taken as a whole, the work advances our understanding of the dual-wavelength approach in continuous stereolithography, improves printing performance, and motivates future research into the wide range of physical phenomena affecting the system.
590
$a
School code: 0127.
650
4
$a
Industrial engineering.
$3
526216
650
4
$a
Polymer chemistry.
$3
3173488
650
4
$a
Materials science.
$3
543314
650
4
$a
Fluid mechanics.
$3
528155
650
4
$a
Optics.
$3
517925
650
4
$a
Chemical engineering.
$3
560457
650
4
$a
Mechanical engineering.
$3
649730
653
$a
3D printing
653
$a
Stereolithography
653
$a
Vat photopolymerization
653
$a
Dual-wavelength continuous stereolithography
653
$a
Additive manufacturing
690
$a
0542
690
$a
0548
690
$a
0794
690
$a
0495
690
$a
0752
690
$a
0204
690
$a
0546
710
2
$a
University of Michigan.
$b
Chemical Engineering.
$3
2094168
773
0
$t
Dissertations Abstracts International
$g
82-07B.
790
$a
0127
791
$a
Ph.D.
792
$a
2020
793
$a
English
856
4 0
$u
https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28240240
based on 0 review(s)
Location:
全部
電子資源
Year:
Volume Number:
Items
1 records • Pages 1 •
1
Inventory Number
Location Name
Item Class
Material type
Call number
Usage Class
Loan Status
No. of reservations
Opac note
Attachments
W9433630
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
On shelf
0
1 records • Pages 1 •
1
Multimedia
Reviews
Add a review
and share your thoughts with other readers
Export
pickup library
Processing
...
Change password
Login