東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

UV-Assisted Functionalization of 3D-...

DeSantis, Paul Michael.

FindBook

Google Book

Amazon

博客來

UV-Assisted Functionalization of 3D-Printed Peek for Use in Spinal Fusion Cages.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	UV-Assisted Functionalization of 3D-Printed Peek for Use in Spinal Fusion Cages./
作者:	DeSantis, Paul Michael.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2020,
面頁冊數:	60 p.
附註:	Source: Masters Abstracts International, Volume: 82-02.
Contained By:	Masters Abstracts International82-02.
標題:	Biomedical engineering. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28021878
ISBN:	9798662437456

UV-Assisted Functionalization of 3D-Printed Peek for Use in Spinal Fusion Cages.
DeSantis, Paul Michael.

UV-Assisted Functionalization of 3D-Printed Peek for Use in Spinal Fusion Cages. - Ann Arbor : ProQuest Dissertations & Theses, 2020 - 60 p.

Source: Masters Abstracts International, Volume: 82-02.

Thesis (M.S.)--Drexel University, 2020.

This item must not be sold to any third party vendors.

Treatment for intervertebral disc degeneration involves the complete removal of the disc and the fusion of two adjacent vertebrae via a biocompatible implant. The implant must be capable of both supporting the mechanical forces experienced by the spine, as well as promoting bone growth. PEEK has been shown to perform well in spinal fusion surgeries, but can face challenges with osseointegration as it is highly hydrophobic. Post-processing techniques have been considered as a method to improve the osseointegration of PEEK spinal cages, with ultraviolet (UV) light assisted functionalization being one possible method. The addition of calcium phosphate to bone scaffolds has been shown to increase osseointegration due to similarities to hydroxyapatite, a major inorganic component of bone. We investigated the use of UV-assisted functionalization to add a calcium phosphate layer to PEEK samples in order to improve osseointegration.PEEK samples with dimensions of 10 x 10 x 1 mm were obtained via fused filament fabrication/3D printing and submerged in simulated body fluid (SBF). Samples were exposed to a 2W/cm2 UV light for six hours, and then placed in a water bath set to 37 °C for a total of 72 hours, with SBF being changed after 48 hours. After functionalization, the PEEK samples were washed with DI water and dried. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was performed on the functionalized samples, control PEEK samples that were not treated, and control samples that were soaked in SBF for 72 hours but were not exposed to UV light. Images of the surface of the functionalized samples and controls were obtained using a scanning electron microscope (SEM) (Zeiss Supra 50VP) with EDS (Oxford) capabilities.SEM/EDS analysis of UV functionalized PEEK samples showed morphological surface changes as well as calcium and phosphorous on the surface of the material. The functionalized PEEK samples were found to have a molar Ca:P ratio of 1.69, while natural hydroxyapatite has a molar ratio of 1.67. EDS analysis of non-functionalized control samples found no calcium or phosphorus. FTIR results found that the non-functionalized PEEK samples and the PEEK samples that were soaked in SBF but were not treated by UV were nearly identical, with no calcium phosphate. For functionalized samples, notable peaks were observed at 560 and 600 cm−1, and between 1000 and 1100 cm−1, which has shown to be a phosphate group.Analysis of functionalized PEEK revealed that UV-assisted functionalization successfully applied a layer of calcium phosphate material to the surface of the sample. While the goal was to obtain a layer of hydroxyapatite in order to promote osteoblast adhesion, the observed ratios of calcium to phosphate obtained via EDS are more likely to indicate an amorphous calcium phosphate layer. The addition of this layer to the PEEK surface is believed to enhance the osseointegration of newly developed biomedical implants.

ISBN: 9798662437456Subjects--Topical Terms:

535387
Biomedical engineering.
Subjects--Index Terms:

3D printing

UV-Assisted Functionalization of 3D-Printed Peek for Use in Spinal Fusion Cages.
LDR:04143nmm a2200385 4500 001 2276904
005 20210510092436.5
008 220723s2020 ||||||||||||||||| ||eng d
020 $a 9798662437456
035 $a (MiAaPQ)AAI28021878
035 $a AAI28021878
040 $a MiAaPQ $c MiAaPQ
100 1 $a DeSantis, Paul Michael. $3 3555206
245 1 0 $a UV-Assisted Functionalization of 3D-Printed Peek for Use in Spinal Fusion Cages.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2020
300 $a 60 p.
500 $a Source: Masters Abstracts International, Volume: 82-02.
500 $a Advisor: Marcolongo, Michele.
502 $a Thesis (M.S.)--Drexel University, 2020.
506 $a This item must not be sold to any third party vendors.
520 $a Treatment for intervertebral disc degeneration involves the complete removal of the disc and the fusion of two adjacent vertebrae via a biocompatible implant. The implant must be capable of both supporting the mechanical forces experienced by the spine, as well as promoting bone growth. PEEK has been shown to perform well in spinal fusion surgeries, but can face challenges with osseointegration as it is highly hydrophobic. Post-processing techniques have been considered as a method to improve the osseointegration of PEEK spinal cages, with ultraviolet (UV) light assisted functionalization being one possible method. The addition of calcium phosphate to bone scaffolds has been shown to increase osseointegration due to similarities to hydroxyapatite, a major inorganic component of bone. We investigated the use of UV-assisted functionalization to add a calcium phosphate layer to PEEK samples in order to improve osseointegration.PEEK samples with dimensions of 10 x 10 x 1 mm were obtained via fused filament fabrication/3D printing and submerged in simulated body fluid (SBF). Samples were exposed to a 2W/cm2 UV light for six hours, and then placed in a water bath set to 37 °C for a total of 72 hours, with SBF being changed after 48 hours. After functionalization, the PEEK samples were washed with DI water and dried. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was performed on the functionalized samples, control PEEK samples that were not treated, and control samples that were soaked in SBF for 72 hours but were not exposed to UV light. Images of the surface of the functionalized samples and controls were obtained using a scanning electron microscope (SEM) (Zeiss Supra 50VP) with EDS (Oxford) capabilities.SEM/EDS analysis of UV functionalized PEEK samples showed morphological surface changes as well as calcium and phosphorous on the surface of the material. The functionalized PEEK samples were found to have a molar Ca:P ratio of 1.69, while natural hydroxyapatite has a molar ratio of 1.67. EDS analysis of non-functionalized control samples found no calcium or phosphorus. FTIR results found that the non-functionalized PEEK samples and the PEEK samples that were soaked in SBF but were not treated by UV were nearly identical, with no calcium phosphate. For functionalized samples, notable peaks were observed at 560 and 600 cm−1, and between 1000 and 1100 cm−1, which has shown to be a phosphate group.Analysis of functionalized PEEK revealed that UV-assisted functionalization successfully applied a layer of calcium phosphate material to the surface of the sample. While the goal was to obtain a layer of hydroxyapatite in order to promote osteoblast adhesion, the observed ratios of calcium to phosphate obtained via EDS are more likely to indicate an amorphous calcium phosphate layer. The addition of this layer to the PEEK surface is believed to enhance the osseointegration of newly developed biomedical implants.
590 $a School code: 0065.
650 4 $a Biomedical engineering. $3 535387
650 4 $a Bioengineering. $3 657580
650 4 $a Materials science. $3 543314
653 $a 3D printing
653 $a Calcium phosphate
653 $a Hydroxyapatite
653 $a Osteoblast
653 $a PEEK
653 $a UV functionalization
690 $a 0541
690 $a 0794
690 $a 0202
710 2 $a Drexel University. $b Biomedical Engineering (School of Biomedical Engineering, Science, and Health Systems). $3 3194198
773 0 $t Masters Abstracts International $g 82-02.
790 $a 0065
791 $a M.S.
792 $a 2020
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=28021878