語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Intelligent manufacturing and energy...
~
International Conference on Intelligent Manufacturing and Energy Sustainability ((2019 :)
FindBook
Google Book
Amazon
博客來
Intelligent manufacturing and energy sustainability = proceedings of ICIMES 2019 /
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Intelligent manufacturing and energy sustainability/ edited by A.N.R. Reddy ... [et al.].
其他題名:
proceedings of ICIMES 2019 /
其他題名:
ICIMES 2019
其他作者:
Reddy, A. N. R.
團體作者:
International Conference on Intelligent Manufacturing and Energy Sustainability
出版者:
Singapore :Springer Singapore : : 2020.,
面頁冊數:
xli, 842 p. :ill., digital ;24 cm.
內容註:
Performance Evaluation of Multi-Layer Barriers for Machine-Induced Low Frequency Noise Attenuation -- Planing Process on AISI S-1006, S-7 and S-4340, based on Johnson-Cook Model Using Numerical Technique -- An Analytical Study of Diametral Error in Simultaneous Turning Process -- Improvement of Electric Heater Design for Household Cooking Application in Developing Countries -- Embodiment of an Efficient Brown's Gas Compound Fuel Tank -- Automated Solar Photovoltaic Panel Cleaning/Cooling System using Air-water Mixture and Sustainable Solutions to Off-grid Electrification -- Design and fabrication of four way multi hacksaw cutting machine -- Adhesion strength of Plasma Sprayed Coatings-A Review -- An Experimental Studies on the Polymer Hybrid Composites- Effect of fibers on Characterization -- Design Analysis and Pressure Loss Optimization of Automobile Muffler -- Different Module for car parking system demonstrated using Hough Transform for smart city development -- Effect of Arrangement and Number of Water Mist Spray Nozzles on Air Humidity -- Vibration Condition Monitoring of Spur Gear Using Feature Extraction of EMD and Hilbert Huang Transform -- Comparative Study of PWM Technique for Switching Loss Reduction and Acoustic Noise Reduction in VSI fed Drives -- An Improved Genetic Algorithm for Production Planning and Scheduling Optimization Problem -- Automatic Calibration for Residential Water Meters by Using Artificial Vision -- "Hardware in The Loop" of a flow plant embedded in FPGA, for process control -- Error Diagnosis in Space Navigation Integration using Wavelet Multi Resolution Analysis with General Regression Neural Network -- Hydromagnetic squeeze film performance of two conducting longitudinally rough elliptical plates -- Performance and Emission Characteristics of Biodiesel from Rapeseed & Soybean in CI Engine -- A Practical approach to Camera Calibration for Part Alignment for Hybrid Additive Manufacturing using Computer Vision -- Development of a colour and orientation detection system for small part feeding -- Comparative analysis on battery used in Solar Refrigerated E-rickshaw in India -- "Application of Value Stream Mapping (VSM) in a Sewing Line for Improving Overall Equipment Effectiveness (OEE): A Case Study" -- CFD analysis to increase heat transfer in pipe with combined effect of circular perforated ring and twisted tape insert -- Study On Solar Parabolic Trough Collector With Different Copper Absorber Tubes -- Harmonic Analysis for Bidirectional Grid Connected Converter for Electrical Vehicle during Charging and Discharging Operations -- Effect of tribolayer on the sliding wear behavior of detonation sprayed Alumina-Titania coatings -- Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes -- Review on Sliding wear of Ti6Al4V alloy concerning counterface and sliding conditions -- Hardness and Microstructure studies on the effect of Solution treated-age hardened Al-6082 Alloy -- Floating Photo Voltaic Thin Film Technology - A Review -- Effect of Ethanol fumigation on performance and combustion characteristics of Compression Ignition Engine fuelled with Used Cooking Oil Methyl Ester in dual fuel mode -- Estimation and Moderation of Harmonics in Distribution Systems -- Theoretical Evaluation of Energy Performance of a Vapour Compression Refrigeration System Using Sustainable Refrigerants -- Effect of Autofrettage on the properties of the Aluminum Cylinders -- Influence of Graphene and Tungsten Carbide Reinforcement on Tensile and Flexural strength of Glass Fiber Epoxy Composites -- Investigation of partial discharge due to copper spherical particle in power transformer under various oil flow models using CFD -- A high power high frequency isolated DC-power supply for electrical vehicle charging application -- Effect of Slicing thickness and Increment on the design of patient specific implant for Total Knee Replacement (TKR) using Magnetic Resonance Imaging (MRI) - A case study -- Microstructure and Hardness Behavior Sudy of Carbon Nanotube in Aluminium Nanocomposites -- Comparison of Electric field with and without corona ring for 66kV line insulator -- Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece -- The Effect of Recrystallization on Electrical Resistivity of Stir Casted SiCP/AA6061 Composite after Shot Peening -- Static Stress Analysis of WYE-Piece for penstock application -- Comparative Investigation on Gas Tungsten Arc Welding and Friction Stir Welding of Electrolytic Tough Pitch Copper Plates -- Synthesis and Characterisation of Functionally Graded Ceramic Material for Aerospace Applications -- CI Engine Characteristic Investigation by Application of Metal Based Additives with Biodiesel Blends -- Simulation of underground cable faults (defects) with the detection of partial discharge -- Comparison of CI Engine performance parameters and Emissions by varying designs of Intake Manifolds -- Variation of Time Lag, Decrement Factor and Inside Surface Temperature with Solar Optical Properties of Building Envelope in Different Climatic Zones of India -- Study On Tensile and Hardness Properties of Al7075 Alloy Reinforced With Graphite, Mica and E-Glass -- ANN based fault classification and section identification technique using superimposed currents for three-terminal transmission line -- An analytical investigation for combined pressure driven and electroosmotic flow without the Debye-Huckel approximation -- Addressing the Green tribology advancement, future development and challenges -- Effect of Drying Temperature to the Drying Characteristic, Morphology and Peak Viscosity of Traditionally Processed Sago Starch (Lemantak) -- Evaluating Mechanical Properties of Egg Shell and Coco Peat Reinforced Epoxy Composite -- Design Modification of Rear Axle Housing by Fatigue Failure Analysis -- Mixture Design using Low Cost Adsorbent Materials for Decolourisation of Biomethanated Distillery Spent Wash in Continuous Packed Bed Column -- Prediction of the WPPO Biodiesel Fuelled HCCI Engine Using Artificial Neural Networks -- Dimensional Analysis of Form Drilling parameters by Buckingham pi theorem and optimization of heat generation in Form drilling process by Taguchi -- Comparison of ductile, flexural, impact and hardness attributes of sisal fiber reinforced polyester composites -- Optimization of EDM Process Parameters using Standard Deviation and Multi-Objective Optimization on the basis of Simple Ratio Analysis (MOOSRA) -- Modeling and Simulation of Trans Z-source Inverter with Maximum Constant Boost PWM Control for Solar PV System -- Driver Drowsiness Monitoring System -- Detection and Control of Water Leakage in Pipelines and Taps Using Arduino Nano Microcontroller -- Smart Automated Processes for Bottle-filling Industry using PLC-SCADA System -- Effect of Stirring Speed During Casting on Mechanical Properties of Al-Si Based MMCs -- Exploration of Pillars of Industry 4.0 using Latent Semantic Analysis Technique -- An Overview of Different Topologies of DC-DC Bidirectional Converter for Different Applications -- An Approach to detect and classify defects in Cantilever Beams using Dynamic Mode Decomposition and Machine Learning -- Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device -- Fuzzy Regenerative Braking Strategy -- A New Framework for Secure utsourcing of Medical Data -- A Comprehensive View for Providing the Decision on Medicare data -- Predicting Cardiac-Arrhythmia Using QRS Detection and Multi-Layer Perceptron -- Full Length Driver Drowsiness Detection Model - Utilising Driver Specific Judging Parameters -- Enterprise Reporting Solution on Integrating Business Intelligence for Operational and Financial Data -- Accelerating The Classifier Training Using Various Boosting Schemes Within Cascades Of Boosted Ensembles (Cobes) -- Service Layer Security Architecture For Iot Using Biometric Authentication And Cryptography Technique.
Contained By:
Springer eBooks
標題:
Manufacturing processes - Congresses. -
電子資源:
https://doi.org/10.1007/978-981-15-1616-0
ISBN:
9789811516160
Intelligent manufacturing and energy sustainability = proceedings of ICIMES 2019 /
Intelligent manufacturing and energy sustainability
proceedings of ICIMES 2019 /[electronic resource] :ICIMES 2019edited by A.N.R. Reddy ... [et al.]. - Singapore :Springer Singapore :2020. - xli, 842 p. :ill., digital ;24 cm. - Smart innovation, systems and technologies,v.1692190-3018 ;. - Smart innovation, systems and technologies ;v.169..
Performance Evaluation of Multi-Layer Barriers for Machine-Induced Low Frequency Noise Attenuation -- Planing Process on AISI S-1006, S-7 and S-4340, based on Johnson-Cook Model Using Numerical Technique -- An Analytical Study of Diametral Error in Simultaneous Turning Process -- Improvement of Electric Heater Design for Household Cooking Application in Developing Countries -- Embodiment of an Efficient Brown's Gas Compound Fuel Tank -- Automated Solar Photovoltaic Panel Cleaning/Cooling System using Air-water Mixture and Sustainable Solutions to Off-grid Electrification -- Design and fabrication of four way multi hacksaw cutting machine -- Adhesion strength of Plasma Sprayed Coatings-A Review -- An Experimental Studies on the Polymer Hybrid Composites- Effect of fibers on Characterization -- Design Analysis and Pressure Loss Optimization of Automobile Muffler -- Different Module for car parking system demonstrated using Hough Transform for smart city development -- Effect of Arrangement and Number of Water Mist Spray Nozzles on Air Humidity -- Vibration Condition Monitoring of Spur Gear Using Feature Extraction of EMD and Hilbert Huang Transform -- Comparative Study of PWM Technique for Switching Loss Reduction and Acoustic Noise Reduction in VSI fed Drives -- An Improved Genetic Algorithm for Production Planning and Scheduling Optimization Problem -- Automatic Calibration for Residential Water Meters by Using Artificial Vision -- "Hardware in The Loop" of a flow plant embedded in FPGA, for process control -- Error Diagnosis in Space Navigation Integration using Wavelet Multi Resolution Analysis with General Regression Neural Network -- Hydromagnetic squeeze film performance of two conducting longitudinally rough elliptical plates -- Performance and Emission Characteristics of Biodiesel from Rapeseed & Soybean in CI Engine -- A Practical approach to Camera Calibration for Part Alignment for Hybrid Additive Manufacturing using Computer Vision -- Development of a colour and orientation detection system for small part feeding -- Comparative analysis on battery used in Solar Refrigerated E-rickshaw in India -- "Application of Value Stream Mapping (VSM) in a Sewing Line for Improving Overall Equipment Effectiveness (OEE): A Case Study" -- CFD analysis to increase heat transfer in pipe with combined effect of circular perforated ring and twisted tape insert -- Study On Solar Parabolic Trough Collector With Different Copper Absorber Tubes -- Harmonic Analysis for Bidirectional Grid Connected Converter for Electrical Vehicle during Charging and Discharging Operations -- Effect of tribolayer on the sliding wear behavior of detonation sprayed Alumina-Titania coatings -- Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes -- Review on Sliding wear of Ti6Al4V alloy concerning counterface and sliding conditions -- Hardness and Microstructure studies on the effect of Solution treated-age hardened Al-6082 Alloy -- Floating Photo Voltaic Thin Film Technology - A Review -- Effect of Ethanol fumigation on performance and combustion characteristics of Compression Ignition Engine fuelled with Used Cooking Oil Methyl Ester in dual fuel mode -- Estimation and Moderation of Harmonics in Distribution Systems -- Theoretical Evaluation of Energy Performance of a Vapour Compression Refrigeration System Using Sustainable Refrigerants -- Effect of Autofrettage on the properties of the Aluminum Cylinders -- Influence of Graphene and Tungsten Carbide Reinforcement on Tensile and Flexural strength of Glass Fiber Epoxy Composites -- Investigation of partial discharge due to copper spherical particle in power transformer under various oil flow models using CFD -- A high power high frequency isolated DC-power supply for electrical vehicle charging application -- Effect of Slicing thickness and Increment on the design of patient specific implant for Total Knee Replacement (TKR) using Magnetic Resonance Imaging (MRI) - A case study -- Microstructure and Hardness Behavior Sudy of Carbon Nanotube in Aluminium Nanocomposites -- Comparison of Electric field with and without corona ring for 66kV line insulator -- Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece -- The Effect of Recrystallization on Electrical Resistivity of Stir Casted SiCP/AA6061 Composite after Shot Peening -- Static Stress Analysis of WYE-Piece for penstock application -- Comparative Investigation on Gas Tungsten Arc Welding and Friction Stir Welding of Electrolytic Tough Pitch Copper Plates -- Synthesis and Characterisation of Functionally Graded Ceramic Material for Aerospace Applications -- CI Engine Characteristic Investigation by Application of Metal Based Additives with Biodiesel Blends -- Simulation of underground cable faults (defects) with the detection of partial discharge -- Comparison of CI Engine performance parameters and Emissions by varying designs of Intake Manifolds -- Variation of Time Lag, Decrement Factor and Inside Surface Temperature with Solar Optical Properties of Building Envelope in Different Climatic Zones of India -- Study On Tensile and Hardness Properties of Al7075 Alloy Reinforced With Graphite, Mica and E-Glass -- ANN based fault classification and section identification technique using superimposed currents for three-terminal transmission line -- An analytical investigation for combined pressure driven and electroosmotic flow without the Debye-Huckel approximation -- Addressing the Green tribology advancement, future development and challenges -- Effect of Drying Temperature to the Drying Characteristic, Morphology and Peak Viscosity of Traditionally Processed Sago Starch (Lemantak) -- Evaluating Mechanical Properties of Egg Shell and Coco Peat Reinforced Epoxy Composite -- Design Modification of Rear Axle Housing by Fatigue Failure Analysis -- Mixture Design using Low Cost Adsorbent Materials for Decolourisation of Biomethanated Distillery Spent Wash in Continuous Packed Bed Column -- Prediction of the WPPO Biodiesel Fuelled HCCI Engine Using Artificial Neural Networks -- Dimensional Analysis of Form Drilling parameters by Buckingham pi theorem and optimization of heat generation in Form drilling process by Taguchi -- Comparison of ductile, flexural, impact and hardness attributes of sisal fiber reinforced polyester composites -- Optimization of EDM Process Parameters using Standard Deviation and Multi-Objective Optimization on the basis of Simple Ratio Analysis (MOOSRA) -- Modeling and Simulation of Trans Z-source Inverter with Maximum Constant Boost PWM Control for Solar PV System -- Driver Drowsiness Monitoring System -- Detection and Control of Water Leakage in Pipelines and Taps Using Arduino Nano Microcontroller -- Smart Automated Processes for Bottle-filling Industry using PLC-SCADA System -- Effect of Stirring Speed During Casting on Mechanical Properties of Al-Si Based MMCs -- Exploration of Pillars of Industry 4.0 using Latent Semantic Analysis Technique -- An Overview of Different Topologies of DC-DC Bidirectional Converter for Different Applications -- An Approach to detect and classify defects in Cantilever Beams using Dynamic Mode Decomposition and Machine Learning -- Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device -- Fuzzy Regenerative Braking Strategy -- A New Framework for Secure utsourcing of Medical Data -- A Comprehensive View for Providing the Decision on Medicare data -- Predicting Cardiac-Arrhythmia Using QRS Detection and Multi-Layer Perceptron -- Full Length Driver Drowsiness Detection Model - Utilising Driver Specific Judging Parameters -- Enterprise Reporting Solution on Integrating Business Intelligence for Operational and Financial Data -- Accelerating The Classifier Training Using Various Boosting Schemes Within Cascades Of Boosted Ensembles (Cobes) -- Service Layer Security Architecture For Iot Using Biometric Authentication And Cryptography Technique.
This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.
ISBN: 9789811516160
Standard No.: 10.1007/978-981-15-1616-0doiSubjects--Topical Terms:
707954
Manufacturing processes
--Congresses.
LC Class. No.: TS183 / .I584 2019
Dewey Class. No.: 670
Intelligent manufacturing and energy sustainability = proceedings of ICIMES 2019 /
LDR
:09557nmm a2200349 a 4500
001
2216298
003
DE-He213
005
20200713170602.0
006
m d
007
cr nn 008maaau
008
201120s2020 si s 0 eng d
020
$a
9789811516160
$q
(electronic bk.)
020
$a
9789811516153
$q
(paper)
024
7
$a
10.1007/978-981-15-1616-0
$2
doi
035
$a
978-981-15-1616-0
040
$a
GP
$c
GP
041
0
$a
eng
050
4
$a
TS183
$b
.I584 2019
072
7
$a
TGP
$2
bicssc
072
7
$a
TEC020000
$2
bisacsh
072
7
$a
TGP
$2
thema
082
0 4
$a
670
$2
23
090
$a
TS183
$b
.I61 2019
111
2
$a
International Conference on Intelligent Manufacturing and Energy Sustainability
$d
(2019 :
$c
Hyderabad, India)
$3
3448508
245
1 0
$a
Intelligent manufacturing and energy sustainability
$h
[electronic resource] :
$b
proceedings of ICIMES 2019 /
$c
edited by A.N.R. Reddy ... [et al.].
246
3
$a
ICIMES 2019
260
$a
Singapore :
$b
Springer Singapore :
$b
Imprint: Springer,
$c
2020.
300
$a
xli, 842 p. :
$b
ill., digital ;
$c
24 cm.
490
1
$a
Smart innovation, systems and technologies,
$x
2190-3018 ;
$v
v.169
505
0
$a
Performance Evaluation of Multi-Layer Barriers for Machine-Induced Low Frequency Noise Attenuation -- Planing Process on AISI S-1006, S-7 and S-4340, based on Johnson-Cook Model Using Numerical Technique -- An Analytical Study of Diametral Error in Simultaneous Turning Process -- Improvement of Electric Heater Design for Household Cooking Application in Developing Countries -- Embodiment of an Efficient Brown's Gas Compound Fuel Tank -- Automated Solar Photovoltaic Panel Cleaning/Cooling System using Air-water Mixture and Sustainable Solutions to Off-grid Electrification -- Design and fabrication of four way multi hacksaw cutting machine -- Adhesion strength of Plasma Sprayed Coatings-A Review -- An Experimental Studies on the Polymer Hybrid Composites- Effect of fibers on Characterization -- Design Analysis and Pressure Loss Optimization of Automobile Muffler -- Different Module for car parking system demonstrated using Hough Transform for smart city development -- Effect of Arrangement and Number of Water Mist Spray Nozzles on Air Humidity -- Vibration Condition Monitoring of Spur Gear Using Feature Extraction of EMD and Hilbert Huang Transform -- Comparative Study of PWM Technique for Switching Loss Reduction and Acoustic Noise Reduction in VSI fed Drives -- An Improved Genetic Algorithm for Production Planning and Scheduling Optimization Problem -- Automatic Calibration for Residential Water Meters by Using Artificial Vision -- "Hardware in The Loop" of a flow plant embedded in FPGA, for process control -- Error Diagnosis in Space Navigation Integration using Wavelet Multi Resolution Analysis with General Regression Neural Network -- Hydromagnetic squeeze film performance of two conducting longitudinally rough elliptical plates -- Performance and Emission Characteristics of Biodiesel from Rapeseed & Soybean in CI Engine -- A Practical approach to Camera Calibration for Part Alignment for Hybrid Additive Manufacturing using Computer Vision -- Development of a colour and orientation detection system for small part feeding -- Comparative analysis on battery used in Solar Refrigerated E-rickshaw in India -- "Application of Value Stream Mapping (VSM) in a Sewing Line for Improving Overall Equipment Effectiveness (OEE): A Case Study" -- CFD analysis to increase heat transfer in pipe with combined effect of circular perforated ring and twisted tape insert -- Study On Solar Parabolic Trough Collector With Different Copper Absorber Tubes -- Harmonic Analysis for Bidirectional Grid Connected Converter for Electrical Vehicle during Charging and Discharging Operations -- Effect of tribolayer on the sliding wear behavior of detonation sprayed Alumina-Titania coatings -- Development of Sustainable Cementitious Binder Utilizing Silicomanganese Fumes -- Review on Sliding wear of Ti6Al4V alloy concerning counterface and sliding conditions -- Hardness and Microstructure studies on the effect of Solution treated-age hardened Al-6082 Alloy -- Floating Photo Voltaic Thin Film Technology - A Review -- Effect of Ethanol fumigation on performance and combustion characteristics of Compression Ignition Engine fuelled with Used Cooking Oil Methyl Ester in dual fuel mode -- Estimation and Moderation of Harmonics in Distribution Systems -- Theoretical Evaluation of Energy Performance of a Vapour Compression Refrigeration System Using Sustainable Refrigerants -- Effect of Autofrettage on the properties of the Aluminum Cylinders -- Influence of Graphene and Tungsten Carbide Reinforcement on Tensile and Flexural strength of Glass Fiber Epoxy Composites -- Investigation of partial discharge due to copper spherical particle in power transformer under various oil flow models using CFD -- A high power high frequency isolated DC-power supply for electrical vehicle charging application -- Effect of Slicing thickness and Increment on the design of patient specific implant for Total Knee Replacement (TKR) using Magnetic Resonance Imaging (MRI) - A case study -- Microstructure and Hardness Behavior Sudy of Carbon Nanotube in Aluminium Nanocomposites -- Comparison of Electric field with and without corona ring for 66kV line insulator -- Experimental and FEA Simulation of Thermal-Fluid Interaction Between TIN Coated Tungsten Carbide Tool and Inconel-825 Workpiece -- The Effect of Recrystallization on Electrical Resistivity of Stir Casted SiCP/AA6061 Composite after Shot Peening -- Static Stress Analysis of WYE-Piece for penstock application -- Comparative Investigation on Gas Tungsten Arc Welding and Friction Stir Welding of Electrolytic Tough Pitch Copper Plates -- Synthesis and Characterisation of Functionally Graded Ceramic Material for Aerospace Applications -- CI Engine Characteristic Investigation by Application of Metal Based Additives with Biodiesel Blends -- Simulation of underground cable faults (defects) with the detection of partial discharge -- Comparison of CI Engine performance parameters and Emissions by varying designs of Intake Manifolds -- Variation of Time Lag, Decrement Factor and Inside Surface Temperature with Solar Optical Properties of Building Envelope in Different Climatic Zones of India -- Study On Tensile and Hardness Properties of Al7075 Alloy Reinforced With Graphite, Mica and E-Glass -- ANN based fault classification and section identification technique using superimposed currents for three-terminal transmission line -- An analytical investigation for combined pressure driven and electroosmotic flow without the Debye-Huckel approximation -- Addressing the Green tribology advancement, future development and challenges -- Effect of Drying Temperature to the Drying Characteristic, Morphology and Peak Viscosity of Traditionally Processed Sago Starch (Lemantak) -- Evaluating Mechanical Properties of Egg Shell and Coco Peat Reinforced Epoxy Composite -- Design Modification of Rear Axle Housing by Fatigue Failure Analysis -- Mixture Design using Low Cost Adsorbent Materials for Decolourisation of Biomethanated Distillery Spent Wash in Continuous Packed Bed Column -- Prediction of the WPPO Biodiesel Fuelled HCCI Engine Using Artificial Neural Networks -- Dimensional Analysis of Form Drilling parameters by Buckingham pi theorem and optimization of heat generation in Form drilling process by Taguchi -- Comparison of ductile, flexural, impact and hardness attributes of sisal fiber reinforced polyester composites -- Optimization of EDM Process Parameters using Standard Deviation and Multi-Objective Optimization on the basis of Simple Ratio Analysis (MOOSRA) -- Modeling and Simulation of Trans Z-source Inverter with Maximum Constant Boost PWM Control for Solar PV System -- Driver Drowsiness Monitoring System -- Detection and Control of Water Leakage in Pipelines and Taps Using Arduino Nano Microcontroller -- Smart Automated Processes for Bottle-filling Industry using PLC-SCADA System -- Effect of Stirring Speed During Casting on Mechanical Properties of Al-Si Based MMCs -- Exploration of Pillars of Industry 4.0 using Latent Semantic Analysis Technique -- An Overview of Different Topologies of DC-DC Bidirectional Converter for Different Applications -- An Approach to detect and classify defects in Cantilever Beams using Dynamic Mode Decomposition and Machine Learning -- Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device -- Fuzzy Regenerative Braking Strategy -- A New Framework for Secure utsourcing of Medical Data -- A Comprehensive View for Providing the Decision on Medicare data -- Predicting Cardiac-Arrhythmia Using QRS Detection and Multi-Layer Perceptron -- Full Length Driver Drowsiness Detection Model - Utilising Driver Specific Judging Parameters -- Enterprise Reporting Solution on Integrating Business Intelligence for Operational and Financial Data -- Accelerating The Classifier Training Using Various Boosting Schemes Within Cascades Of Boosted Ensembles (Cobes) -- Service Layer Security Architecture For Iot Using Biometric Authentication And Cryptography Technique.
520
$a
This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.
650
0
$a
Manufacturing processes
$x
Congresses.
$3
707954
650
0
$a
Manufacturing processes
$x
Energy conservation
$v
Congresses.
$3
3448511
650
1 4
$a
Manufacturing, Machines, Tools, Processes.
$3
3381528
650
2 4
$a
Artificial Intelligence.
$3
769149
650
2 4
$a
Sustainable Architecture/Green Buildings.
$3
3209903
650
2 4
$a
Energy Materials.
$3
3220517
650
2 4
$a
Energy Systems.
$3
1530445
700
1
$a
Reddy, A. N. R.
$3
3448509
710
2
$a
SpringerLink (Online service)
$3
836513
773
0
$t
Springer eBooks
830
0
$a
Smart innovation, systems and technologies ;
$v
v.169.
$3
3448510
856
4 0
$u
https://doi.org/10.1007/978-981-15-1616-0
950
$a
Engineering (Springer-11647)
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9391202
電子資源
11.線上閱覽_V
電子書
EB TS183 .I584 2019
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入