東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

An Investigation into the Aerodynami...

Parker, Colin M.

FindBook

Google Book

Amazon

博客來

An Investigation into the Aerodynamics Surrounding Vertical-Axis Wind Turbines.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	An Investigation into the Aerodynamics Surrounding Vertical-Axis Wind Turbines./
作者:	Parker, Colin M.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2018,
面頁冊數:	138 p.
附註:	Source: Dissertation Abstracts International, Volume: 79-07(E), Section: B.
Contained By:	Dissertation Abstracts International79-07B(E).
標題:	Fluid mechanics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10687173
ISBN:	9780355615951

An Investigation into the Aerodynamics Surrounding Vertical-Axis Wind Turbines.
Parker, Colin M.

An Investigation into the Aerodynamics Surrounding Vertical-Axis Wind Turbines. - Ann Arbor : ProQuest Dissertations & Theses, 2018 - 138 p.

Source: Dissertation Abstracts International, Volume: 79-07(E), Section: B.

Thesis (Ph.D.)--The George Washington University, 2018.

The flow surrounding a scaled model vertical-axis wind turbine (VAWT) at realistic operating conditions was studied. The model closely matches geometric and dynamic properties---tip-speed ratio and Reynolds number---of a full-size turbine. The flowfield is measured using particle imaging velocimetry (PIV) in the mid-plane upstream, around, and after (up to 4 turbine diameters downstream) the turbine, as well as a vertical plane behind the turbine. Ensemble-averaged results revealed an asymmetric wake behind the turbine, regardless of tip-speed ratio, with a larger velocity deficit for a higher tip-speed ratio. For the higher tip-speed ratio, an area of averaged flow reversal is present with a maximum reverse flow of --0.04Uinfinity. Phase-averaged vorticity fields---achieved by syncing the PIV system with the rotation of the turbine---show distinct structures form from each turbine blade. There are distinct differences in the structures that are shed into the wake for tip-speed ratios of 0.9, 1.3 and 2.2---switching from two pairs to a single pair of shed vortices---and how they convect into the wake---the middle tip-speed ratio vortices convect downstream inside the wake, while the high tip-speed ratio pair is shed into the shear layer of the wake. The wake structure is found to be much more sensitive to changes in tip-speed ratio than to changes in Reynolds number. The geometry of a turbine can influence tip-speed ratio, but the precise relationship among VAWT geometric parameters and VAWT wake characteristics remains unknown. Next, we characterize the wakes of three VAWTs that are geometrically similar except for the ratio of the turbine diameter (D), to blade chord (c), which was chosen to be D/c = 3, 6, and 9, for a fixed freestream Reynolds number based on the blade chord of Rec =16,000. In addition to two-component PIV and single-component constant temperature anemometer measurements are made at the horizontal mid-plane in the wake of each turbine. Hot-wire measurement locations are selected to coincide with the edge of the shear layer of each turbine wake, as deduced from the PIV data, which allows for an analysis of the frequency content of the wake due to vortex shedding by the turbine. Changing the tip-speed ratio leads to substantial wake variation possibly because changing the tip-speed ratio changes the dynamic solidity. In this work, we achieve a similar change in dynamic solidity by varying the D/c ratio and holding the tip-speed ratio constant. This change leads to very similar characteristic shifts in the wake, such as a greater blockage effect, including averaged flow reversal in the case of high dynamic solidity (D/c = 3). The phase-averaged vortex identification shows that both the blockage effect and the wake structures are similarly affected by a change in dynamic solidity. At lower dynamic solidity, pairs of vortices are shed into the wake directly downstream of the turbine. For all three models, a vortex chain is shed into the shear layer at the edge of the wake where the blade is processing into the freestream.

ISBN: 9780355615951Subjects--Topical Terms:

528155
Fluid mechanics.

An Investigation into the Aerodynamics Surrounding Vertical-Axis Wind Turbines.
LDR:04095nmm a2200325 4500 001 2201000
005 20190329144317.5
008 201008s2018 ||||||||||||||||| ||eng d
020 $a 9780355615951
035 $a (MiAaPQ)AAI10687173
035 $a (MiAaPQ)gwu:13881
035 $a AAI10687173
040 $a MiAaPQ $c MiAaPQ
100 1 $a Parker, Colin M. $3 3427730
245 1 3 $a An Investigation into the Aerodynamics Surrounding Vertical-Axis Wind Turbines.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2018
300 $a 138 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-07(E), Section: B.
500 $a Adviser: Megan C. Leftwich.
502 $a Thesis (Ph.D.)--The George Washington University, 2018.
520 $a The flow surrounding a scaled model vertical-axis wind turbine (VAWT) at realistic operating conditions was studied. The model closely matches geometric and dynamic properties---tip-speed ratio and Reynolds number---of a full-size turbine. The flowfield is measured using particle imaging velocimetry (PIV) in the mid-plane upstream, around, and after (up to 4 turbine diameters downstream) the turbine, as well as a vertical plane behind the turbine. Ensemble-averaged results revealed an asymmetric wake behind the turbine, regardless of tip-speed ratio, with a larger velocity deficit for a higher tip-speed ratio. For the higher tip-speed ratio, an area of averaged flow reversal is present with a maximum reverse flow of --0.04Uinfinity. Phase-averaged vorticity fields---achieved by syncing the PIV system with the rotation of the turbine---show distinct structures form from each turbine blade. There are distinct differences in the structures that are shed into the wake for tip-speed ratios of 0.9, 1.3 and 2.2---switching from two pairs to a single pair of shed vortices---and how they convect into the wake---the middle tip-speed ratio vortices convect downstream inside the wake, while the high tip-speed ratio pair is shed into the shear layer of the wake. The wake structure is found to be much more sensitive to changes in tip-speed ratio than to changes in Reynolds number. The geometry of a turbine can influence tip-speed ratio, but the precise relationship among VAWT geometric parameters and VAWT wake characteristics remains unknown. Next, we characterize the wakes of three VAWTs that are geometrically similar except for the ratio of the turbine diameter (D), to blade chord (c), which was chosen to be D/c = 3, 6, and 9, for a fixed freestream Reynolds number based on the blade chord of Rec =16,000. In addition to two-component PIV and single-component constant temperature anemometer measurements are made at the horizontal mid-plane in the wake of each turbine. Hot-wire measurement locations are selected to coincide with the edge of the shear layer of each turbine wake, as deduced from the PIV data, which allows for an analysis of the frequency content of the wake due to vortex shedding by the turbine. Changing the tip-speed ratio leads to substantial wake variation possibly because changing the tip-speed ratio changes the dynamic solidity. In this work, we achieve a similar change in dynamic solidity by varying the D/c ratio and holding the tip-speed ratio constant. This change leads to very similar characteristic shifts in the wake, such as a greater blockage effect, including averaged flow reversal in the case of high dynamic solidity (D/c = 3). The phase-averaged vortex identification shows that both the blockage effect and the wake structures are similarly affected by a change in dynamic solidity. At lower dynamic solidity, pairs of vortices are shed into the wake directly downstream of the turbine. For all three models, a vortex chain is shed into the shear layer at the edge of the wake where the blade is processing into the freestream.
590 $a School code: 0075.
650 4 $a Fluid mechanics. $3 528155
650 4 $a Thermodynamics. $3 517304
650 4 $a Energy. $3 876794
650 4 $a Aerospace engineering. $3 1002622
690 $a 0204
690 $a 0348
690 $a 0791
690 $a 0538
710 2 $a The George Washington University. $b Mechanical & Aerospace Engineering. $3 3342083
773 0 $t Dissertation Abstracts International $g 79-07B(E).
790 $a 0075
791 $a Ph.D.
792 $a 2018
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10687173