東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Fluorescence based passive samplers ...

Flynn, Kathleen.

FindBook

Google Book

Amazon

博客來

Fluorescence based passive samplers for diluted bitumen in water.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Fluorescence based passive samplers for diluted bitumen in water./
作者:	Flynn, Kathleen.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	38 p.
附註:	Source: Dissertation Abstracts International, Volume: 75-01C.
Contained By:	Dissertation Abstracts International75-01C.
標題:	Environmental science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10593589

Fluorescence based passive samplers for diluted bitumen in water.
Flynn, Kathleen.

Fluorescence based passive samplers for diluted bitumen in water. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 38 p.

Source: Dissertation Abstracts International, Volume: 75-01C.

Thesis (Ph.D.)--Queen's University (Canada), 2017.

Passive samplers are low-cost and simple devices that can be used to monitor analytes in dynamic systems. In this project, Polydimethylsiloxane and UltraEverDry films were tested for application as passive samplers for dilbit. Three types of oil were used, dissolved, mechanically dispersed, and mechanically dispersed with chemical enhancement. PDMS absorbed oil, with dispersed oil allowing for faster uptake into PDMS than dissolved oil. Equilibration times ranged from 4-8 days for dispersed oil, depending on the thickness of the film. The lower detection limit of the thick PDMS films is ~0.4 ppm but can be improved by improving film reproducibility. Thin films had a partition coefficient of ~1000 while thick films had a partition coefficient of ~6000. Oil can be extracted from PDMS films with ethanol giving a volume dependent signal. Films and ethanol extracts can be used to monitor the concentration of dilbit present in model systems for riverbeds and real-life oil release scenarios. Oil was not observed adsorbed to UltraEverDry.Subjects--Topical Terms:

677245
Environmental science.

Fluorescence based passive samplers for diluted bitumen in water.
LDR:01883nmm a2200265 4500 001 2199544
005 20180613122742.5
008 201008s2017 ||||||||||||||||| ||eng d
035 $a (MiAaPQ)AAI10593589
035 $a (MiAaPQ)QueensUCan197415620
035 $a AAI10593589
040 $a MiAaPQ $c MiAaPQ
100 1 $a Flynn, Kathleen. $3 535116
245 1 0 $a Fluorescence based passive samplers for diluted bitumen in water.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 38 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-01C.
502 $a Thesis (Ph.D.)--Queen's University (Canada), 2017.
520 $a Passive samplers are low-cost and simple devices that can be used to monitor analytes in dynamic systems. In this project, Polydimethylsiloxane and UltraEverDry films were tested for application as passive samplers for dilbit. Three types of oil were used, dissolved, mechanically dispersed, and mechanically dispersed with chemical enhancement. PDMS absorbed oil, with dispersed oil allowing for faster uptake into PDMS than dissolved oil. Equilibration times ranged from 4-8 days for dispersed oil, depending on the thickness of the film. The lower detection limit of the thick PDMS films is ~0.4 ppm but can be improved by improving film reproducibility. Thin films had a partition coefficient of ~1000 while thick films had a partition coefficient of ~6000. Oil can be extracted from PDMS films with ethanol giving a volume dependent signal. Films and ethanol extracts can be used to monitor the concentration of dilbit present in model systems for riverbeds and real-life oil release scenarios. Oil was not observed adsorbed to UltraEverDry.
590 $a School code: 0283.
650 4 $a Environmental science. $3 677245
690 $a 0768
710 2 $a Queen's University (Canada). $3 1017786
773 0 $t Dissertation Abstracts International $g 75-01C.
790 $a 0283
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10593589