10th International Symposium on High...
International Symposium on High-Temperature Metallurgical Processing (2019 :)

FindBook      Google Book      Amazon      博客來     
  • 10th International Symposium on High-Temperature Metallurgical Processing
  • 紀錄類型: 書目-電子資源 : Monograph/item
    正題名/作者: 10th International Symposium on High-Temperature Metallurgical Processing/ edited by Tao Jiang ... [et al.].
    其他作者: Jiang, Tao.
    團體作者: International Symposium on High-Temperature Metallurgical Processing
    出版者: Cham :Springer International Publishing : : 2019.,
    面頁冊數: xxi, 817 p. :ill. (some col.), digital ;24 cm.
    內容註: Part 1. Energy-efficient and Clean Metallurgical Technology -- Simplified Process for Making Anode Copper -- Techno-economic Analysis of Energy Recovery from Plastic Waste -- Development of Continuous Blast Furnace Slag Solidification Process for Coarse Aggregates -- An Innovative Oxygen-enriched Flash Smelting Technology for Lead Smelting and its Industrial Application -- Characteristics and Control Technology of Fine Particulate Matter (PM) of Iron Ore Sintering -- Sintering Bed Spraying Steam to Reduce NOx and Dioxin Emissions in Shougang -- Part 2. Simulation and Modeling of High Temperature Metallurgical Process -- Neural Prediction Model for Extraction of Germanium from Zinc Oxide Dust by Microwave Alkaline Roasting-Water Leaching -- Simulation of Velocity Field of Molten Steel in Electric Arc Furnace Steelmaking -- Thermodynamic Modelling of Magnesium, Calcium and Strontium-oxides Reduction Systems in Vacuum -- Metallization and Carburization Kinetics in DR Shaft Furnaces. The Metcarb Model -- CFD Modeling of Flow and Chemical Reactions in a Submerged Lance Copper Smelting Furnace -- Numerical Simulation of Ultrasound-Induced Cavitation Bubbling in a Calcium Ferrite Melt -- Part 3. Alloys and Materials Preparation -- Synthesis of Nanocrystalline Carbide Ceramics via Reduction of Anion-loaded Activated Carbon Precursors -- Production of Lithium-Ion Cathode Material for Automotive Batteries Using Melting Casting Process -- Part 4. Fundamental Research on High Temperature Metallurgical Processing -- Degradation Mechanisms of Refractories in a Bottom Blown Copper Smelting Furnace -- Reaction Routes of CaO-Fe2O3-TiO2 and Calcium Ferrite-TiO2 System in Continuous Heating Process -- Thermodynamic Calculations on Electric Furnace Smelting Separation of Chromium-bearing Vanadium Titanium Magnetite -- Preparation for High Activity Lime and its Effect on Desulfurization of Hot Metal Pretreatment -- Part 5. Extraction and Recovery of Metals -- An Industry Overlook of Secondary Lead Pyrometallurgical Processing -- Recovery of Aluminium and its Compounds with Hydro and Pyrometalurgical Methods from Non-metallic Residue -- Purification of Molten Zinc Chloride-Alkali Chloride by Cementation Reaction -- Thermodynamic Analysis of Smelting of Spent Catalysts for Recovery of Platinum Group Metals -- Preparation of Titanium Foams through Direct Electrolysis of the Sintered CaO-TiO2 in Molten Salt CaCl2 -- Experimental Study on Oxidative Desulfurization and Selective Reduction of Molten Copper Slag -- Recycling SiO2 and Al2O3 from the Metallurgical Slag of Nickel Laterite Ores in Molten Sodium Hydroxides -- Remove Sulfur in Copper Dross from Refining Lead by Converting Process -- Part 6. Treatment and Recycling of Metallurgical Slag/Solid Wastes -- Recovery of Fe-Cu Alloys from Copper Slags -- Physiochemical Properties of High Alumina Blast Furnace Slag -- Effect of Cooling Rate on the Acidolysis of Titania Slag -- Structural Analysis of Ge-containing Ferrous Calcium Silicate Magnesia Slag for Applications of Black Copper Smelting -- Selective Recovery of P and Mn from Steelmaking Slag by Carbothermic Reduction -- The Use of Zirconia-based Solid Electrolytes Oxygen Sensor in High Titanium Slag -- In-situ Observation of the Precipitation Behavior of Dy2O3 Containing Slag System -- Recovery of Zn and Mn from Spent Alkaline Batteries -- Part 7. Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. Agglomeration and Direct Reduction of Complex Iron Ores -- Study on Direct Reduction Melting Separation-leaching Process of Disposal Rare Earth Composite Iron Ore -- Reduction Behavior of Garnierite Using Methane by Roasting-Magnetic Separation Method -- Effect of Calculation Method of CaO Addition on Liquid Phase Fluidity -- Effect of Carbon Coating on Magnetite Reduction -- Optimization Method for Iron Ore Blending Based on the Sintering Basic Characteristics of Blended Ore -- Study on Direct Reduction of Low-grade Iron Ore-coal Mini-pellets in Coal-based Rotary Kiln -- Part 9. Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. Poster Session II -- Analysis of Microwave Drying Behavior of Nickel Laterite -- Analysis of Operational Parameters Affecting Metallization Degree of DRI in Reduction Shaft of COREX Process and Improvement Measures -- Dechlorination of Zinc Oxide Dust by Microwave Rosating with RSM Optimization -- Effect of TiO2 on the Viscous Behavior of High Alumina Blast Furnace Slag -- Fundamental Research on the Iron Nugget Process from Carbon Composite Pellet -- Influence of Coke Quality on Main Technical Indexes of Blast Furnace -- Kinetic Analysis of Blast Furnace Dust Recycling with Flash Reduction Process at High Temperature -- Preparation and Characterization of Iron-coke Briquette -- Preparation of Oxidized pellets with Chrome Ore -- Research and Application of Sintering Surface Steam Spraying Technology for Energy Saving and Quality Improvement -- Research on Bonding Mechanism of Sintering Grate -- Research on Optimizing Sinter Ore Matching Based on the High Temperature Characteristic Numbers -- Research on the Mineral Composition and Microstructure Changes of Iron Ore Sinter during the Gas-Solid Reduction -- Roasting Kinetics of Molybdenite Concentrates -- Study on Influences of Different Ti-bearing Materials on MgO-bearing Pellets Metallurgical Properties -- Supergravity Separation of Pb and Sn from Waste Printed Circuit Boards -- The Effect of Temperature and Additive on Transport and Transformation of P of High-phosphorus Iron Ore during Carbothermic Reduction -- Thermodynamic Calculations on Direct Reduction of Chromium-bearing Vanadium Titanium Magnetite.
    Contained By: Springer eBooks
    標題: Materials at high temperatures - Congresses. -
    電子資源: https://doi.org/10.1007/978-3-030-05955-2
    ISBN: 9783030059552
館藏地:  出版年:  卷號: 
館藏
  • 1 筆 • 頁數 1 •
  • 1 筆 • 頁數 1 •
多媒體
評論
Export
取書館
 
 
變更密碼
登入