東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Discrete element method in the desig...

Gelnar, Daniel.

Linked to FindBook

Google Book

Amazon

博客來

Discrete element method in the design of transport systems = verification and validation of 3D models /

Record Type:	Electronic resources : Monograph/item
Title/Author:	Discrete element method in the design of transport systems/ by Daniel Gelnar, Jiri Zegzulka.
Reminder of title:	verification and validation of 3D models /
Author:	Gelnar, Daniel.
other author:	Zegzulka, Jiri.
Published:	Cham :Springer International Publishing : : 2019.,
Description:	xxi, 208 p. :ill., digital ;24 cm.
[NT 15003449]:	Chapter 1. Introduction -- Chapter 2. Basic description of DEM -- Chapter 3.Basic description of bucket elevators -- Chapter 4.Bucket elevator filling and discharge -- Chapter 5. The new method of design and optimization -- Chapter 6.Input parameters for DEM - bulk material -- Chapter 7.Input parameters for DEM - geometry of the 3D model and validation machine -- Chapter 8. Input parameters - kinematic properties -- Chapter 9. Process validation and calibration -- Chapter 10. The results for the optimization of bucket filling and discharge -- Chapter 11. The results for optimization of filling bulk material in the bucket to minimize travel resistance and impacts -- Chapter 12. The results for process optimization of bulk material filling into the bucket to minimize abrasive and destructive impacts of the bucket edge on the transported mass -- Chapter 13. The optimization of bucket discharge to maximize the transported volume and to minimize material fall down the shaft -- Chapter 14. Conclusion.
Contained By:	Springer eBooks
Subject:	Bulk solids - Transportation. -
Online resource:	https://doi.org/10.1007/978-3-030-05713-8
ISBN:	9783030057138

Discrete element method in the design of transport systems = verification and validation of 3D models /
Gelnar, Daniel.

Discrete element method in the design of transport systemsverification and validation of 3D models /[electronic resource] :by Daniel Gelnar, Jiri Zegzulka. - Cham :Springer International Publishing :2019. - xxi, 208 p. :ill., digital ;24 cm.

Chapter 1. Introduction -- Chapter 2. Basic description of DEM -- Chapter 3.Basic description of bucket elevators -- Chapter 4.Bucket elevator filling and discharge -- Chapter 5. The new method of design and optimization -- Chapter 6.Input parameters for DEM - bulk material -- Chapter 7.Input parameters for DEM - geometry of the 3D model and validation machine -- Chapter 8. Input parameters - kinematic properties -- Chapter 9. Process validation and calibration -- Chapter 10. The results for the optimization of bucket filling and discharge -- Chapter 11. The results for optimization of filling bulk material in the bucket to minimize travel resistance and impacts -- Chapter 12. The results for process optimization of bulk material filling into the bucket to minimize abrasive and destructive impacts of the bucket edge on the transported mass -- Chapter 13. The optimization of bucket discharge to maximize the transported volume and to minimize material fall down the shaft -- Chapter 14. Conclusion.

This book deals with the design and optimization of the bucket elevator using the discrete element method (DEM) It describes the underlying scientific basis for the design of transport equipment using computer simulations and is focused on issues relevant to the industrial sector, mechanical engineering; and the transport, treatment, measurement, and storage of bulk materials. It presents solutions for mitigating bulk material supply chain interruptions due to process malfunctions and failures, utilizing research on monitoring and evaluating of the dynamic processes of particulate matter. The aim of the book is to help readers new to the field with the design of innovative devices. Imparting practical information aimed at saving time and money in project design, the book is ideal for engineers, designers, and researchers concerned with all aspects of bulk materials. Introduces and explains fully the Discrete Element Method using measured values as inputs for the method; Shows whether calculated simulations and real measured values models can be used for design; Illustrates how to validate, calibrate, and optimize the dynamic processes of bulk elevators; Explains how to test transport and storage equipment before it is produced using dynamic simulation of material flow on transport lines, saving time and money.

ISBN: 9783030057138

Standard No.: 10.1007/978-3-030-05713-8doiSubjects--Topical Terms:

3382994
Bulk solids
--Transportation.

LC Class. No.: HE595.B84 / G456 2019

Dewey Class. No.: 387.164

Discrete element method in the design of transport systems = verification and validation of 3D models /
LDR:03363nmm a2200325 a 4500 001 2178619
003 DE-He213
005 20190703161930.0
006 m d
007 cr nn 008maaau
008 191122s2019 gw s 0 eng d
020 $a 9783030057138 $q (electronic bk.)
020 $a 9783030057121 $q (paper)
024 7 $a 10.1007/978-3-030-05713-8 $2 doi
035 $a 978-3-030-05713-8
040 $a GP $c GP
041 0 $a eng
050 4 $a HE595.B84 $b G456 2019
072 7 $a TGP $2 bicssc
072 7 $a TEC020000 $2 bisacsh
072 7 $a TGP $2 thema
082 0 4 $a 387.164 $2 23
090 $a HE595.B84 $b G319 2019
100 1 $a Gelnar, Daniel. $3 3382992
245 1 0 $a Discrete element method in the design of transport systems $h [electronic resource] : $b verification and validation of 3D models / $c by Daniel Gelnar, Jiri Zegzulka.
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2019.
300 $a xxi, 208 p. : $b ill., digital ; $c 24 cm.
505 0 $a Chapter 1. Introduction -- Chapter 2. Basic description of DEM -- Chapter 3.Basic description of bucket elevators -- Chapter 4.Bucket elevator filling and discharge -- Chapter 5. The new method of design and optimization -- Chapter 6.Input parameters for DEM - bulk material -- Chapter 7.Input parameters for DEM - geometry of the 3D model and validation machine -- Chapter 8. Input parameters - kinematic properties -- Chapter 9. Process validation and calibration -- Chapter 10. The results for the optimization of bucket filling and discharge -- Chapter 11. The results for optimization of filling bulk material in the bucket to minimize travel resistance and impacts -- Chapter 12. The results for process optimization of bulk material filling into the bucket to minimize abrasive and destructive impacts of the bucket edge on the transported mass -- Chapter 13. The optimization of bucket discharge to maximize the transported volume and to minimize material fall down the shaft -- Chapter 14. Conclusion.
520 $a This book deals with the design and optimization of the bucket elevator using the discrete element method (DEM) It describes the underlying scientific basis for the design of transport equipment using computer simulations and is focused on issues relevant to the industrial sector, mechanical engineering; and the transport, treatment, measurement, and storage of bulk materials. It presents solutions for mitigating bulk material supply chain interruptions due to process malfunctions and failures, utilizing research on monitoring and evaluating of the dynamic processes of particulate matter. The aim of the book is to help readers new to the field with the design of innovative devices. Imparting practical information aimed at saving time and money in project design, the book is ideal for engineers, designers, and researchers concerned with all aspects of bulk materials. Introduces and explains fully the Discrete Element Method using measured values as inputs for the method; Shows whether calculated simulations and real measured values models can be used for design; Illustrates how to validate, calibrate, and optimize the dynamic processes of bulk elevators; Explains how to test transport and storage equipment before it is produced using dynamic simulation of material flow on transport lines, saving time and money.
650 0 $a Bulk solids $x Transportation. $3 3382994
650 0 $a Discrete element method. $3 2148339
650 1 4 $a Manufacturing, Machines, Tools, Processes. $3 3381528
650 2 4 $a Quality Control, Reliability, Safety and Risk. $3 891027
650 2 4 $a Mathematical and Computational Engineering. $3 3226306
650 2 4 $a Engineering Design. $3 891033
650 2 4 $a Characterization and Evaluation of Materials. $3 890988
700 1 $a Zegzulka, Jiri. $3 3382993
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
856 4 0 $u https://doi.org/10.1007/978-3-030-05713-8
950 $a Engineering (Springer-11647)