東華大學圖書館 |

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 7

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems./ edited by Antonio Baldi ... [et al.].
其他題名:	proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /
其他作者:	Baldi, Antonio.
團體作者:	Annual Conference on Experimental and Applied Mechanics
出版者:	Cham :Springer International Publishing : : 2019.,
面頁冊數:	viii, 127 p. :ill., digital ;24 cm.
內容註:	Chapter1: Comparison between 0D and 1D Heat Source Reconstruction for Fatigue Characterization -- Chapter2: Analysis of the Thermomechanical Response of Granular Materials by Infrared Thermography -- Chapter3: Inverse Identification of the Loading Applied by a Tire on a Landing Gear Wheel -- Chapter4: Fatigue Properties Assessment of API 5L Gr. B Pipeline Steel using Infrared Thermography -- Chapter5: Determination of Constitutive Parameters in Inverse Problem using Thermoelastic Data -- Chapter6: Experimental Investigation of Emissivty Influence to Obtain Thermal Field by Near Infrared Thermography -- Chapter7: Experimental Validation of the Energy Balance Equation in the Presence of Acoustic Emission -- Chapter8: Model Based Inversion for Pulse Thermography -- Chapter9: Experimentally Enhanced Computations: Calibration Methodology for an Anisotropic Metal, Part I - Traditional Approach -- Chapter10: Mechanical Response and Energy Stored During Deformation of Crystallizing TPU -- Chapter11: Measuring Strain-induced Crystallinity in Rubbers from IR Thermography -- Chapter12: Mechanical and Thermomechanical Characterization of Different Leathers -- Chapter13: Experimentally Enhanced Computations: Calibration Methodology for an Anisotropic Metal, Part II - Novel Approach/ Validation -- Chapter14: Multi-instrumentation of Very High Temperature Tests -- Chapter15: Detection of Damage during Quasi-Static Loading of a Single Stringer Panel using Passive Thermography and Acoustic Emission -- Chapter16: The Effect of Chamber Temperature on Residual Stresses of FDM Parts -- Chapter17: System Identification of Structures with Incomplete Modal Information -- Chapter18: Towards Integrating Imaging Techniques to Assess Manufacturing Features and In-service Damage in Composite Components -- Chapter19: Image-based Stress Field Reconstruction in Complex Media -- Chapter20: Infrared Thermography for Material Characterization at Intermediate Strain Rates -- Chapter21: Evaluation of Fatigue Damage in Short Carbon Fiber Reinforced Plastics Based on Thermoelastic Stress and Phase Analysis -- Chapter22: Thermoelastic Stress Field Investigation of a Multiply-Loaded Disk -- Chapter23: Fatigue Limit Estimation for Single Bead-on-plate weld Based on Dissipated Energy Measurement -- Chapter24: Thermoelastic Measurement Techniques Enabled by Self-Reference.
Contained By:	Springer eBooks
標題:	Residual stresses - Congresses. -
電子資源:	https://doi.org/10.1007/978-3-319-95074-7
ISBN:	9783319950747

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 7
Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems.proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /Volume 7[electronic resource] :edited by Antonio Baldi ... [et al.]. - Cham :Springer International Publishing :2019. - viii, 127 p. :ill., digital ;24 cm. - Conference proceedings of the society for experimental mechanics series,2191-5644. - Conference proceedings of the society for experimental mechanics series..

Chapter1: Comparison between 0D and 1D Heat Source Reconstruction for Fatigue Characterization -- Chapter2: Analysis of the Thermomechanical Response of Granular Materials by Infrared Thermography -- Chapter3: Inverse Identification of the Loading Applied by a Tire on a Landing Gear Wheel -- Chapter4: Fatigue Properties Assessment of API 5L Gr. B Pipeline Steel using Infrared Thermography -- Chapter5: Determination of Constitutive Parameters in Inverse Problem using Thermoelastic Data -- Chapter6: Experimental Investigation of Emissivty Influence to Obtain Thermal Field by Near Infrared Thermography -- Chapter7: Experimental Validation of the Energy Balance Equation in the Presence of Acoustic Emission -- Chapter8: Model Based Inversion for Pulse Thermography -- Chapter9: Experimentally Enhanced Computations: Calibration Methodology for an Anisotropic Metal, Part I - Traditional Approach -- Chapter10: Mechanical Response and Energy Stored During Deformation of Crystallizing TPU -- Chapter11: Measuring Strain-induced Crystallinity in Rubbers from IR Thermography -- Chapter12: Mechanical and Thermomechanical Characterization of Different Leathers -- Chapter13: Experimentally Enhanced Computations: Calibration Methodology for an Anisotropic Metal, Part II - Novel Approach/ Validation -- Chapter14: Multi-instrumentation of Very High Temperature Tests -- Chapter15: Detection of Damage during Quasi-Static Loading of a Single Stringer Panel using Passive Thermography and Acoustic Emission -- Chapter16: The Effect of Chamber Temperature on Residual Stresses of FDM Parts -- Chapter17: System Identification of Structures with Incomplete Modal Information -- Chapter18: Towards Integrating Imaging Techniques to Assess Manufacturing Features and In-service Damage in Composite Components -- Chapter19: Image-based Stress Field Reconstruction in Complex Media -- Chapter20: Infrared Thermography for Material Characterization at Intermediate Strain Rates -- Chapter21: Evaluation of Fatigue Damage in Short Carbon Fiber Reinforced Plastics Based on Thermoelastic Stress and Phase Analysis -- Chapter22: Thermoelastic Stress Field Investigation of a Multiply-Loaded Disk -- Chapter23: Fatigue Limit Estimation for Single Bead-on-plate weld Based on Dissipated Energy Measurement -- Chapter24: Thermoelastic Measurement Techniques Enabled by Self-Reference.

Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 7 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Inverse Problems/Hybrid Techniques Material Characterizations Using Thermography Thermoelastic Stress Analysis Fatigue & Damage Evaluation Using Infrared Thermography Integration of Infrared Thermography & DIC Thermographic Non-Destructive Evaluation (NDE)

ISBN: 9783319950747

Standard No.: 10.1007/978-3-319-95074-7doiSubjects--Topical Terms:

3217016
Residual stresses
--Congresses.

LC Class. No.: TA417.6

Dewey Class. No.: 620.1123

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 7
LDR:04254nmm a2200337 a 4500 001 2177543
003 DE-He213
005 20190530141039.0
006 m d
007 cr nn 008maaau
008 191122s2019 gw s 0 eng d
020 $a 9783319950747 $q (electronic bk.)
020 $a 9783319950730 $q (paper)
024 7 $a 10.1007/978-3-319-95074-7 $2 doi
035 $a 978-3-319-95074-7
040 $a GP $c GP
041 0 $a eng
050 4 $a TA417.6
072 7 $a TG $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TG $2 thema
082 0 4 $a 620.1123 $2 23
090 $a TA417.6 $b .A615 2018
111 2 $a Annual Conference on Experimental and Applied Mechanics $d (2018 : $c Greenville, S.C.) $3 3380082
245 1 0 $a Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. $n Volume 7 $h [electronic resource] : $b proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / $c edited by Antonio Baldi ... [et al.].
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2019.
300 $a viii, 127 p. : $b ill., digital ; $c 24 cm.
490 1 $a Conference proceedings of the society for experimental mechanics series, $x 2191-5644
505 0 $a Chapter1: Comparison between 0D and 1D Heat Source Reconstruction for Fatigue Characterization -- Chapter2: Analysis of the Thermomechanical Response of Granular Materials by Infrared Thermography -- Chapter3: Inverse Identification of the Loading Applied by a Tire on a Landing Gear Wheel -- Chapter4: Fatigue Properties Assessment of API 5L Gr. B Pipeline Steel using Infrared Thermography -- Chapter5: Determination of Constitutive Parameters in Inverse Problem using Thermoelastic Data -- Chapter6: Experimental Investigation of Emissivty Influence to Obtain Thermal Field by Near Infrared Thermography -- Chapter7: Experimental Validation of the Energy Balance Equation in the Presence of Acoustic Emission -- Chapter8: Model Based Inversion for Pulse Thermography -- Chapter9: Experimentally Enhanced Computations: Calibration Methodology for an Anisotropic Metal, Part I - Traditional Approach -- Chapter10: Mechanical Response and Energy Stored During Deformation of Crystallizing TPU -- Chapter11: Measuring Strain-induced Crystallinity in Rubbers from IR Thermography -- Chapter12: Mechanical and Thermomechanical Characterization of Different Leathers -- Chapter13: Experimentally Enhanced Computations: Calibration Methodology for an Anisotropic Metal, Part II - Novel Approach/ Validation -- Chapter14: Multi-instrumentation of Very High Temperature Tests -- Chapter15: Detection of Damage during Quasi-Static Loading of a Single Stringer Panel using Passive Thermography and Acoustic Emission -- Chapter16: The Effect of Chamber Temperature on Residual Stresses of FDM Parts -- Chapter17: System Identification of Structures with Incomplete Modal Information -- Chapter18: Towards Integrating Imaging Techniques to Assess Manufacturing Features and In-service Damage in Composite Components -- Chapter19: Image-based Stress Field Reconstruction in Complex Media -- Chapter20: Infrared Thermography for Material Characterization at Intermediate Strain Rates -- Chapter21: Evaluation of Fatigue Damage in Short Carbon Fiber Reinforced Plastics Based on Thermoelastic Stress and Phase Analysis -- Chapter22: Thermoelastic Stress Field Investigation of a Multiply-Loaded Disk -- Chapter23: Fatigue Limit Estimation for Single Bead-on-plate weld Based on Dissipated Energy Measurement -- Chapter24: Thermoelastic Measurement Techniques Enabled by Self-Reference.
520 $a Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 7 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Inverse Problems/Hybrid Techniques Material Characterizations Using Thermography Thermoelastic Stress Analysis Fatigue & Damage Evaluation Using Infrared Thermography Integration of Infrared Thermography & DIC Thermographic Non-Destructive Evaluation (NDE)
650 0 $a Residual stresses $v Congresses. $3 3217016
650 0 $a Materials $x Mechanical properties $v Congresses. $3 1074008
650 1 4 $a Continuum Mechanics and Mechanics of Materials. $3 890989
650 2 4 $a Engineering Thermodynamics, Heat and Mass Transfer. $3 1002079
650 2 4 $a Spectroscopy and Microscopy. $3 1066375
650 2 4 $a Mathematical and Computational Engineering. $3 3226306
650 2 4 $a Engineering Acoustics. $3 1533220
700 1 $a Baldi, Antonio. $3 3296511
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
830 0 $a Conference proceedings of the society for experimental mechanics series. $3 2054299
856 4 0 $u https://doi.org/10.1007/978-3-319-95074-7
950 $a Engineering (Springer-11647)