語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Experimental investigation of the no...
~
Powers, Russell William Walter.
FindBook
Google Book
Amazon
博客來
Experimental investigation of the noise reduction of supersonic exhaust jets with fluidic inserts.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Experimental investigation of the noise reduction of supersonic exhaust jets with fluidic inserts./
作者:
Powers, Russell William Walter.
出版者:
Ann Arbor : ProQuest Dissertations & Theses, : 2015,
面頁冊數:
235 p.
附註:
Source: Dissertation Abstracts International, Volume: 77-03(E), Section: B.
Contained By:
Dissertation Abstracts International77-03B(E).
標題:
Aerospace engineering. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3730673
ISBN:
9781339169613
Experimental investigation of the noise reduction of supersonic exhaust jets with fluidic inserts.
Powers, Russell William Walter.
Experimental investigation of the noise reduction of supersonic exhaust jets with fluidic inserts.
- Ann Arbor : ProQuest Dissertations & Theses, 2015 - 235 p.
Source: Dissertation Abstracts International, Volume: 77-03(E), Section: B.
Thesis (Ph.D.)--The Pennsylvania State University, 2015.
The noise produced by the supersonic, high temperature jets that exhaust from military aircraft is becoming a hazard to naval personnel and a disturbance to communities near military bases. Methods to reduce the noise produced from these jets in a practical full-scale environment are difficult. The development and analysis of distributed nozzle blowing for the reduction of radiated noise from supersonic jets is described. Model scale experiments of jets that simulate the exhaust jets from typical low-bypass ratio military jet aircraft engines during takeoff are performed. Fluidic inserts are created that use distributed blowing in the divergent section of the nozzle to simulate mechanical, hardwall corrugations, while having the advantage of being an active control method. This research focuses on model scale experiments to better understand the fluidic insert noise reduction method. Distributed blowing within the divergent section of the military-style convergent divergent nozzle alters the shock structure of the jet in addition to creating streamwise vorticity for the reduction of mixing noise. Enhancements to the fluidic insert design have been performed along with experiments over a large number of injection parameters and core jet conditions. Primarily military-style round nozzles have been used, with preliminary measurements of hardwall corrugations and fluidic inserts in rectangular nozzle geometries also performed.
ISBN: 9781339169613Subjects--Topical Terms:
1002622
Aerospace engineering.
Experimental investigation of the noise reduction of supersonic exhaust jets with fluidic inserts.
LDR
:04971nmm a2200325 4500
001
2162471
005
20180928111504.5
008
190424s2015 ||||||||||||||||| ||eng d
020
$a
9781339169613
035
$a
(MiAaPQ)AAI3730673
035
$a
AAI3730673
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Powers, Russell William Walter.
$3
3350462
245
1 0
$a
Experimental investigation of the noise reduction of supersonic exhaust jets with fluidic inserts.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2015
300
$a
235 p.
500
$a
Source: Dissertation Abstracts International, Volume: 77-03(E), Section: B.
500
$a
Adviser: Dennis K. McLaughlin.
502
$a
Thesis (Ph.D.)--The Pennsylvania State University, 2015.
520
$a
The noise produced by the supersonic, high temperature jets that exhaust from military aircraft is becoming a hazard to naval personnel and a disturbance to communities near military bases. Methods to reduce the noise produced from these jets in a practical full-scale environment are difficult. The development and analysis of distributed nozzle blowing for the reduction of radiated noise from supersonic jets is described. Model scale experiments of jets that simulate the exhaust jets from typical low-bypass ratio military jet aircraft engines during takeoff are performed. Fluidic inserts are created that use distributed blowing in the divergent section of the nozzle to simulate mechanical, hardwall corrugations, while having the advantage of being an active control method. This research focuses on model scale experiments to better understand the fluidic insert noise reduction method. Distributed blowing within the divergent section of the military-style convergent divergent nozzle alters the shock structure of the jet in addition to creating streamwise vorticity for the reduction of mixing noise. Enhancements to the fluidic insert design have been performed along with experiments over a large number of injection parameters and core jet conditions. Primarily military-style round nozzles have been used, with preliminary measurements of hardwall corrugations and fluidic inserts in rectangular nozzle geometries also performed.
520
$a
It has been shown that the noise reduction of the fluidic inserts is most heavily dependent upon the momentum flux ratio between the injector and core jet. Maximum reductions of approximately 5.5 dB OASPL have been observed with practical mass flow rates and injection pressures. The first measurements with fluidic inserts in the presence of a forward flight stream have been performed. Optimal noise reduction occurs at similar injector parameters in the presence of forward flight. Fluidic inserts in the presence of a forward flight stream were observed to reduce the peak mixing noise below the already reduced levels by nearly 4 dB OASP and the broadband shock-associated noise by nearly 3 dB OASP.
520
$a
Unsteady velocity measurements are used to complement acoustic results of jets with fluidic inserts. Measured axial turbulence intensities and mean axial velocity are examined to illuminate the differences in the flow field from jets with fluidic inserts. Comparisons of laser Doppler measurements with RANS CFD simulations are shown with good agreement. Analysis of the effect of spatial turbulence on the measured quantities is performed.
520
$a
Experimental model scale measurements of jets with and without fluidic inserts over a simulated carrier deck are presented. The model carrier environment consists of a ground plane of adjustable distance below the jet, and a simulated jet blast deflector similar to those found in practice. Measurements are performed with far-field microphones, near-field microphones, and unsteady pressure sensors. The constructive and destructive interference that results from the interaction of the direct and reflected sound waves is observed and compared with results from free jets. The noise reduction of fluidic inserts in a realistic carrier deck environment with steering of the "quiet planes" is examined. The overall sound pressure level in heat-simulated jets is reduced by 3-5 dB depending on the specific angle and ground plane height. Jets impinging upon a modeled jet blast deflector are tested in addition to jets solely in the presence of the carrier deck. Observed modifications to the acoustic field from the presence of the jet blast deflector include downstream acoustic shielding and low frequency augmentation. The region of maximum noise radiation for heat-simulated jets from nozzles with fluidic inserts impinging on the jet blast deflector is reduced in overall sound pressure level by 4-7 dB. This region includes areas where aircraft carrier personnel are located. iv.
590
$a
School code: 0176.
650
4
$a
Aerospace engineering.
$3
1002622
650
4
$a
Acoustics.
$3
879105
690
$a
0538
690
$a
0986
710
2
$a
The Pennsylvania State University.
$3
699896
773
0
$t
Dissertation Abstracts International
$g
77-03B(E).
790
$a
0176
791
$a
Ph.D.
792
$a
2015
793
$a
English
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3730673
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9362018
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入