東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Fabrication and Characterization of ...

Ng, Jason Clement.

FindBook

Google Book

Amazon

博客來

Fabrication and Characterization of Linear and Nonlinear Photonic Devices in Fused Silica by Femtosecond Laser Writing.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Fabrication and Characterization of Linear and Nonlinear Photonic Devices in Fused Silica by Femtosecond Laser Writing./
作者:	Ng, Jason Clement.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	115 p.
附註:	Source: Dissertation Abstracts International, Volume: 79-04(E), Section: B.
Contained By:	Dissertation Abstracts International79-04B(E).
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10254855
ISBN:	9780355453614

Fabrication and Characterization of Linear and Nonlinear Photonic Devices in Fused Silica by Femtosecond Laser Writing.
Ng, Jason Clement.

Fabrication and Characterization of Linear and Nonlinear Photonic Devices in Fused Silica by Femtosecond Laser Writing. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 115 p.

Source: Dissertation Abstracts International, Volume: 79-04(E), Section: B.

Thesis (Ph.D.)--University of Toronto (Canada), 2017.

Femtosecond laser processing is a flexible, three-dimensional (3D) fabrication technique used to make integrated low-loss photonic devices in fused silica. My work expanded the suite of available optical devices through the design and optimization of linear optical components such as low-loss (< 0.5 dB) curved waveguides, directional couplers (DCs), and Mach-Zehnder interferometers (MZIs). The robustness and consistency of this maturing fabrication process was also reinforced through the scalable design and integration of a more complex, multi-component flat-top interleaver over a wide >70-nm spectral window.

ISBN: 9780355453614Subjects--Topical Terms:

649834
Electrical engineering.

Fabrication and Characterization of Linear and Nonlinear Photonic Devices in Fused Silica by Femtosecond Laser Writing.
LDR:03621nmm a2200325 4500 001 2159371
005 20180628100930.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9780355453614
035 $a (MiAaPQ)AAI10254855
035 $a (MiAaPQ)toronto:15282
035 $a AAI10254855
040 $a MiAaPQ $c MiAaPQ
100 1 $a Ng, Jason Clement. $3 3347242
245 1 0 $a Fabrication and Characterization of Linear and Nonlinear Photonic Devices in Fused Silica by Femtosecond Laser Writing.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 115 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-04(E), Section: B.
500 $a Advisers: Li Qian; Peter R. Herman.
502 $a Thesis (Ph.D.)--University of Toronto (Canada), 2017.
520 $a Femtosecond laser processing is a flexible, three-dimensional (3D) fabrication technique used to make integrated low-loss photonic devices in fused silica. My work expanded the suite of available optical devices through the design and optimization of linear optical components such as low-loss (< 0.5 dB) curved waveguides, directional couplers (DCs), and Mach-Zehnder interferometers (MZIs). The robustness and consistency of this maturing fabrication process was also reinforced through the scalable design and integration of a more complex, multi-component flat-top interleaver over a wide >70-nm spectral window.
520 $a My work further complemented femtosecond laser processing with the development of nonlinear device capabilities. While thermal poling is a well known process, significant challenges had restricted the development of nonlinear devices in fused silica. The laser writing process would erase the induced nonlinearity (erasing) while a written waveguide core acted as a barrier to the thermal poling process (blocking). Using second harmonic (SH) microscopy, the effectiveness of thermal poling on laser-written waveguides was systematically analyzed leading to the technique of "double poling", which effectively overcomes the two challenges of erasing and blocking. In this new process the substrate is poled before and after waveguide writing to restore the induced nonlinearity within the vicinity of the waveguide to enable effective poling for inducing a second-order nonlinearity (SON) in fused silica. A new flexible, femtosecond laser based erasure process was also developed to enable quasi-phase matching and to form arbitrarily chirped gratings. Following this result, second harmonic generation (SHG) in a quasiphase-matched (QPM) femtosecond laser written waveguide device was demonstrated. SHG in a chirped QPM structure was also demonstrated to illustrate the flexibility of the femtosecond laser writing technique. These are the first demonstration of frequency doubling in an all-femtosecond-laser-written structure. A maximum SHG conversion efficiency of 1.3 +/- 0.1x10 --11/W-cm--2 was achieved for the fundamental wavelength of 1552.8 nm with a phase-matching bandwidth of 4.4 nm for a 10.0-mm-long waveguide. For a shorter sample, an effective SON of chi(2) = 0:020 +/- 0:002 pm/V was measured.
520 $a The results collectively demonstrate the versatility of femtosecond laser additive and subtractive fabrication and opens up the development of integrated nonlinear applications and photonic devices for future lab-on-a-chip and lab-in-a-fiber devices.
590 $a School code: 0779.
650 4 $a Electrical engineering. $3 649834
650 4 $a Optics. $3 517925
690 $a 0544
690 $a 0752
710 2 $a University of Toronto (Canada). $b Electrical and Computer Engineering. $3 2096349
773 0 $t Dissertation Abstracts International $g 79-04B(E).
790 $a 0779
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10254855