東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Metal hydride and pyrophoric fuel ad...

Shark, Steven C.

FindBook

Google Book

Amazon

博客來

Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants./
作者:	Shark, Steven C.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2014,
面頁冊數:	223 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
Contained By:	Dissertation Abstracts International76-02B(E).
標題:	Aerospace engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636514
ISBN:	9781321181579

Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants.
Shark, Steven C.

Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants. - Ann Arbor : ProQuest Dissertations & Theses, 2014 - 223 p.

Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.

Thesis (Ph.D.)--Purdue University, 2014.

The purpose of this study is to investigate the use of reactive energetic fuel additives that have the potential to increase the combustion performance of hybrid rocket propellants in terms of solid fuel regression rate and combustion efficiency. Additives that can augment the combustion flame zone in a hybrid rocket motor by means of increased energy feedback to the fuel grain surface are of great interest. Metal hydrides have large volumetric hydrogen densities, which gives these materials high performance potential as fuel additives in terms of specifc impulse. The excess hydrogen and corresponding base metal may also cause an increase in the hybrid rocket solid fuel regression rate. Pyrophoric additives also have potential to increase the solid fuel regression rate by reacting more readily near the burning fuel surface providing rapid energy feedback.

ISBN: 9781321181579Subjects--Topical Terms:

1002622
Aerospace engineering.

Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants.
LDR:06911nmm a2200361 4500 001 2157560
005 20180605073453.5
008 190424s2014 ||||||||||||||||| ||eng d
020 $a 9781321181579
035 $a (MiAaPQ)AAI3636514
035 $a (MiAaPQ)purdue:16887
035 $a AAI3636514
040 $a MiAaPQ $c MiAaPQ
100 1 $a Shark, Steven C. $3 3345370
245 1 0 $a Metal hydride and pyrophoric fuel additives for dicyclopentadiene based hybrid propellants.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2014
300 $a 223 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
500 $a Advisers: Stephen Heister; Steven Son.
502 $a Thesis (Ph.D.)--Purdue University, 2014.
520 $a The purpose of this study is to investigate the use of reactive energetic fuel additives that have the potential to increase the combustion performance of hybrid rocket propellants in terms of solid fuel regression rate and combustion efficiency. Additives that can augment the combustion flame zone in a hybrid rocket motor by means of increased energy feedback to the fuel grain surface are of great interest. Metal hydrides have large volumetric hydrogen densities, which gives these materials high performance potential as fuel additives in terms of specifc impulse. The excess hydrogen and corresponding base metal may also cause an increase in the hybrid rocket solid fuel regression rate. Pyrophoric additives also have potential to increase the solid fuel regression rate by reacting more readily near the burning fuel surface providing rapid energy feedback.
520 $a An experimental performance evaluation of metal hydride fuel additives for hybrid rocket motor propulsion systems is examined in this study. Hypergolic ignition droplet tests and an accelerated aging study revealed the protection capabilities of Dicyclopentadiene (DCPD) as a fuel binder, and the ability for unaided ignition. Static hybrid rocket motor experiments were conducted using DCPD as the fuel. Sodium borohydride (NabH4) and aluminum hydride (AlH3) were examined as fuel additives. Ninety percent rocket grade hydrogen peroxide (RGHP) was used as the oxidizer. In this study, the sensitivity of solid fuel regression rate and characteristic velocity (C*) efficiency to total fuel grain port mass flux and particle loading is examined. These results were compared to HTPB combustion performance as a baseline. Chamber pressure histories revealed steady motor operation in most tests, with reduced ignition delays when using NabH4 as a fuel additive. The addition of NabH4 and AlH3 produced up to a 47% and 85% increase in regression rate over neat DCPD, respectively. For all test conditions examined C* efficiency ranges between 80% and 90%. The regression rate and C* efficiency mass flux dependence indicate a shift towards a more diffusion controlled system with metal hydride particle addition.
520 $a Although these types of energetic particles have potential as high performing fuel additives, they can be in low supply and expensive. An opposed flow burner was investigated as a means to screen and characterize hybrid rocket fuels prior to full scale rocket motor testing. Although this type of configuration has been investigated in the past, no comparison has been made to hybrid rocket motor operation in terms of mass flux. Polymeric fuels and low melt temperature fuels with and without additives were investigated via an opposed flow burner. The effects of laminar and turbulent flow regimes on the convective heat transfer in the opposed flow system was depicted in the regression rate trends of these fuels. Regression rate trends similar to hybrid rocket motor operation were depicted, including the entrainment mechanism for paran fuel. However, there was a shift in overall magnitude of these results. A decrease in regression rate occurred for HTPB loaded with passivated nano-aluminum, due to low resonance time in the reaction zone. Previous results have shown that pyrophoric additives can cause an increase in regression rate in the opposed flow burner configuration. It is proposed that the opposed burner is useful as a screening and characterization tool for some propellant combinations.
520 $a Gaseous oxygen (GOX) was investigated as an oxidizer for similar fuels evaluated with RGHP. Specifically, combustion performance sensitivity to mass flux and MH particle size was investigated. Similar results to the RGHP experiments were observed for the regression rate tends of HTPB, DPCD, and NabH 4 addition. Kinetically limited regression rate dependence on mass flux was observed at the higher mass flux levels. No major increase in C* efficiency was observed for MH addition. The C* efficiency varied with equivalence ratio by approximately 10 percentage points, which was not observed in the RGHP experiments. A 10 percentage point decrease in C* efficiency was observed with increasing mass flux in the system. This was most likely due to poorly mixed fuel and oxidizer in center of the combustion chamber at the higher mass flux levels.
520 $a Detailed measurements of the hybrid rocket combustion zone is useful for understanding the mechanisms governing performance, but can be difficult to obtain. Traditional slab burner configurations have proven useful but are operationally limited in pressure and mass flux ranges. A new optical cylindrical combustor (OCC) design is presented that allows surface and flame zone imaging and tracking during hybrid rocket motor operation at appreciable mass flux and pressure levels, > 100 kg/s/m2 and > 0.69 MPa. The flame height and regression rate sensitivity to mass flux and chamber pressure was examined for the same fuels examined in the GOX hybrid rocket motor, with the addition of DCPD fuel loaded with Al and unpassivated mechanically activated Al-PTFE. The regression rate trends were on the same order of magnitude of traditional hybrid rocket motor results. A flame height decrease was observed for increased mass flux. The flame height increased with NabH 4 addition, which is most likely a function of increased blowing at the surface. There was no appreciable flame height sensitivity to NabH4 particle size. There was no relative change in flame height or regression rate between the Al and AL-PTFE addition. The OCC allowed visualization of the hybrid rocket fuel flame zone at mass flux and pressure levels that are not known to be report for traditional slab burner configurations in literature. The OCC proved to be a new useful tool for investigated hybrid rocket propellant combustion characteristics.
590 $a School code: 0183.
650 4 $a Aerospace engineering. $3 1002622
650 4 $a Mechanical engineering. $3 649730
650 4 $a Astronomy. $3 517668
690 $a 0538
690 $a 0548
690 $a 0606
710 2 $a Purdue University. $b Aeronautics and Astronautics. $3 1035670
773 0 $t Dissertation Abstracts International $g 76-02B(E).
790 $a 0183
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636514