東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Basics of continuum plasticity

Chung, Kwansoo.

Linked to FindBook

Google Book

Amazon

博客來

Basics of continuum plasticity

Record Type:	Electronic resources : Monograph/item
Title/Author:	Basics of continuum plasticity/ by Kwansoo Chung, Myoung-Gyu Lee.
Author:	Chung, Kwansoo.
other author:	Lee, Myoung-Gyu.
Published:	Singapore :Springer Singapore : : 2018.,
Description:	xvi, 360 p. :ill. (some col.), digital ;24 cm.
[NT 15003449]:	Part I: One-dimensional Plasticity -- Chapter 1: Introduction to Materials Mechanics -- Chapter 2: Plasticity Characteristics (in Simple Tension/Compression) -- Chapter 3: Instability in Simple Tension Test -- Chapter 4: Physical Plasticity -- Chapter 5: Deformation of Heterogeneous Structures -- Chapter 6: Pure Bending and Beam Theory -- Chapter 7: Torsion -- Part II: Basics of Continuum Mechanics -- Chapter 8: Stress -- Chapter 9: Tensors -- Chapter 10: Gradient, Divergence and Curl -- Chapter 11: Kinematics (Strain) -- Part III: Three-dimensional Plasticity -- Chapter 12: Yield Function -- Chapter 13: Normality Rule for Plastic Deformation -- Chapter 14: Plane Stress Problems for Sheets -- Chapter 15: Hardening Law for Evolution of Yield Surface -- Chapter 16: Stress Update Formulation -- Chapter 17: Formability and Springback of Sheets -- Appendix -- Index.
Contained By:	Springer eBooks
Subject:	Continuum mechanics. -
Online resource:	http://dx.doi.org/10.1007/978-981-10-8306-8
ISBN:	9789811083068

Basics of continuum plasticity
Chung, Kwansoo.

Basics of continuum plasticity[electronic resource] /by Kwansoo Chung, Myoung-Gyu Lee. - Singapore :Springer Singapore :2018. - xvi, 360 p. :ill. (some col.), digital ;24 cm.

Part I: One-dimensional Plasticity -- Chapter 1: Introduction to Materials Mechanics -- Chapter 2: Plasticity Characteristics (in Simple Tension/Compression) -- Chapter 3: Instability in Simple Tension Test -- Chapter 4: Physical Plasticity -- Chapter 5: Deformation of Heterogeneous Structures -- Chapter 6: Pure Bending and Beam Theory -- Chapter 7: Torsion -- Part II: Basics of Continuum Mechanics -- Chapter 8: Stress -- Chapter 9: Tensors -- Chapter 10: Gradient, Divergence and Curl -- Chapter 11: Kinematics (Strain) -- Part III: Three-dimensional Plasticity -- Chapter 12: Yield Function -- Chapter 13: Normality Rule for Plastic Deformation -- Chapter 14: Plane Stress Problems for Sheets -- Chapter 15: Hardening Law for Evolution of Yield Surface -- Chapter 16: Stress Update Formulation -- Chapter 17: Formability and Springback of Sheets -- Appendix -- Index.

This book describes the basic principles of plasticity for students and engineers who wish to perform plasticity analyses in their professional lives, and provides an introduction to the application of plasticity theories and basic continuum mechanics in metal forming processes. This book consists of three parts. The first part deals with the characteristics of plasticity and instability under simple tension or compression and plasticity in beam bending and torsion. The second part is designed to provide the basic principles of continuum mechanics, and the last part presents an extension of one-dimensional plasticity to general three-dimensional laws based on the fundamentals of continuum mechanics. Though most parts of the book are written in the context of general plasticity, the last two chapters are specifically devoted to sheet metal forming applications. The homework problems included are designed to reinforce understanding of the concepts involved. This book may be used as a textbook for a one semester course lasting fourteen weeks or longer. This book is intended to be self-sufficient such that readers can study it independently without taking another formal course. However, there are some prerequisites before starting this book, which include a course on engineering mathematics and an introductory course on solid mechanics.

ISBN: 9789811083068

Standard No.: 10.1007/978-981-10-8306-8doiSubjects--Topical Terms:

535472
Continuum mechanics.

LC Class. No.: QA808.2 / .C486 2018

Dewey Class. No.: 620.11233

Basics of continuum plasticity
LDR:03204nmm a2200325 a 4500 001 2142181
003 DE-He213
005 20181112154032.0
006 m d
007 cr nn 008maaau
008 181214s2018 si s 0 eng d
020 $a 9789811083068 $q (electronic bk.)
020 $a 9789811083051 $q (paper)
024 7 $a 10.1007/978-981-10-8306-8 $2 doi
035 $a 978-981-10-8306-8
040 $a GP $c GP
041 0 $a eng
050 4 $a QA808.2 $b .C486 2018
072 7 $a TG $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TEC021000 $2 bisacsh
082 0 4 $a 620.11233 $2 23
090 $a QA808.2 $b .C559 2018
100 1 $a Chung, Kwansoo. $3 3321579
245 1 0 $a Basics of continuum plasticity $h [electronic resource] / $c by Kwansoo Chung, Myoung-Gyu Lee.
260 $a Singapore : $b Springer Singapore : $b Imprint: Springer, $c 2018.
300 $a xvi, 360 p. : $b ill. (some col.), digital ; $c 24 cm.
505 0 $a Part I: One-dimensional Plasticity -- Chapter 1: Introduction to Materials Mechanics -- Chapter 2: Plasticity Characteristics (in Simple Tension/Compression) -- Chapter 3: Instability in Simple Tension Test -- Chapter 4: Physical Plasticity -- Chapter 5: Deformation of Heterogeneous Structures -- Chapter 6: Pure Bending and Beam Theory -- Chapter 7: Torsion -- Part II: Basics of Continuum Mechanics -- Chapter 8: Stress -- Chapter 9: Tensors -- Chapter 10: Gradient, Divergence and Curl -- Chapter 11: Kinematics (Strain) -- Part III: Three-dimensional Plasticity -- Chapter 12: Yield Function -- Chapter 13: Normality Rule for Plastic Deformation -- Chapter 14: Plane Stress Problems for Sheets -- Chapter 15: Hardening Law for Evolution of Yield Surface -- Chapter 16: Stress Update Formulation -- Chapter 17: Formability and Springback of Sheets -- Appendix -- Index.
520 $a This book describes the basic principles of plasticity for students and engineers who wish to perform plasticity analyses in their professional lives, and provides an introduction to the application of plasticity theories and basic continuum mechanics in metal forming processes. This book consists of three parts. The first part deals with the characteristics of plasticity and instability under simple tension or compression and plasticity in beam bending and torsion. The second part is designed to provide the basic principles of continuum mechanics, and the last part presents an extension of one-dimensional plasticity to general three-dimensional laws based on the fundamentals of continuum mechanics. Though most parts of the book are written in the context of general plasticity, the last two chapters are specifically devoted to sheet metal forming applications. The homework problems included are designed to reinforce understanding of the concepts involved. This book may be used as a textbook for a one semester course lasting fourteen weeks or longer. This book is intended to be self-sufficient such that readers can study it independently without taking another formal course. However, there are some prerequisites before starting this book, which include a course on engineering mathematics and an introductory course on solid mechanics.
650 0 $a Continuum mechanics. $3 535472
650 0 $a Plasticity. $3 566563
650 0 $a Materials science. $3 543314
650 1 4 $a Engineering. $3 586835
650 2 4 $a Continuum Mechanics and Mechanics of Materials. $3 890989
650 2 4 $a Classical Mechanics. $3 3216970
650 2 4 $a Characterization and Evaluation of Materials. $3 890988
650 2 4 $a Numerical and Computational Physics, Simulation. $3 2209853
700 1 $a Lee, Myoung-Gyu. $3 3321580
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
856 4 0 $u http://dx.doi.org/10.1007/978-981-10-8306-8
950 $a Engineering (Springer-11647)