東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Interface Engineering and Morphology...

Meng, Lei.

Linked to FindBook

Google Book

Amazon

博客來

Interface Engineering and Morphology Study of Thin Film Organic-Inorganic Halide Perovskite Optoelectronic Devices.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Interface Engineering and Morphology Study of Thin Film Organic-Inorganic Halide Perovskite Optoelectronic Devices./
Author:	Meng, Lei.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
Description:	161 p.
Notes:	Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
Contained By:	Dissertation Abstracts International78-10B(E).
Subject:	Materials science. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10284140
ISBN:	9781369827224

Interface Engineering and Morphology Study of Thin Film Organic-Inorganic Halide Perovskite Optoelectronic Devices.
Meng, Lei.

Interface Engineering and Morphology Study of Thin Film Organic-Inorganic Halide Perovskite Optoelectronic Devices. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 161 p.

Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.

Thesis (Ph.D.)--University of California, Los Angeles, 2017.

Solar energy harvesting through photovoltaic conversion has gained great attention as a sustainable and environmentally friendly solution to meet the rapidly increasing global energy demand. Currently, the high cost of solar-cell technology limits its widespread use. This situation has generated considerable interest in developing alternative solar-cell technologies that reduce cost through the use of less expensive materials and processes. Perovskite solar cells provide a promising low-cost technology for harnessing this energy source.

ISBN: 9781369827224Subjects--Topical Terms:

543314
Materials science.

Interface Engineering and Morphology Study of Thin Film Organic-Inorganic Halide Perovskite Optoelectronic Devices.
LDR:03746nmm a2200325 4500 001 2122704
005 20170922124939.5
008 180830s2017 ||||||||||||||||| ||eng d
020 $a 9781369827224
035 $a (MiAaPQ)AAI10284140
035 $a AAI10284140
040 $a MiAaPQ $c MiAaPQ
100 1 $a Meng, Lei. $3 1033757
245 1 0 $a Interface Engineering and Morphology Study of Thin Film Organic-Inorganic Halide Perovskite Optoelectronic Devices.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 161 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
500 $a Adviser: Yang Yang.
502 $a Thesis (Ph.D.)--University of California, Los Angeles, 2017.
520 $a Solar energy harvesting through photovoltaic conversion has gained great attention as a sustainable and environmentally friendly solution to meet the rapidly increasing global energy demand. Currently, the high cost of solar-cell technology limits its widespread use. This situation has generated considerable interest in developing alternative solar-cell technologies that reduce cost through the use of less expensive materials and processes. Perovskite solar cells provide a promising low-cost technology for harnessing this energy source.
520 $a In Chapter two, a moisture-assist method is introduced and studied to facilitate grain growth of solution processed perovskite films. As an approach to achieve high-quality perovskite films, I anneal the precursor film in a humid environment (ambient air) to dramatically increase grain size, carrier mobility, and charge carrier lifetime, thus improving electrical and optical properties and enhancing photovoltaic performance. It is revealed that mild moisture has a positive effect on perovskite film formation, demonstrating perovskite solar cells with 17.1% power conversion efficiency. Later on, in Chapter four, an ultrathin flexible device delivering a PCE of 14.0% is introduced. The device is based on silver-mesh substrates exhibiting superior durability against mechanical bending.
520 $a Due to their low energy of formation, organic lead iodide perovskites are also susceptible to degradation in moisture and air. The charge transport layer therefore plays a key role in protecting the perovskite photoactive layer from exposure to such environments, thus achieving highly stable perovskite-based photovoltaic cells. Although incorporating organic charge transport layers can provide high efficiencies and reduced hysteresis, concerns remain regarding device stability and the cost of fabrication. In this work, perovskite solar cells that have all solution-processed metal oxide charge transport layers were demonstrated. Stability has been significantly improved compared with cells made with organic layers. Degradation mechanisms were investigated and important guidelines were derived for future device design with a view to achieving both highly efficient and stable solar devices.
520 $a Organometal halide based perovskite material has great optoelectronic proprieties, for example, shallow traps, benign grain boundaries and high diffusion length. The perovskite LEDs show pure electroluminescence (EL) with narrow full width at half maximum (FWHM), which is an advantage for display, lighting or lasing applications. In chapter five, perovskite LEDs are demonstrated employing solution processed charge injection layers with a quantum efficiency of 1.16% with a very low driving voltage.
590 $a School code: 0031.
650 4 $a Materials science. $3 543314
650 4 $a Engineering. $3 586835
690 $a 0794
690 $a 0537
710 2 $a University of California, Los Angeles. $b Materials Science and Engineering 0328. $3 3192900
773 0 $t Dissertation Abstracts International $g 78-10B(E).
790 $a 0031
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10284140