東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

The development and characterization...

Bible, Michael S.

FindBook

Google Book

Amazon

博客來

The development and characterization of novel metal-organic framework and polymer composites for use as 3D printable materials.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	The development and characterization of novel metal-organic framework and polymer composites for use as 3D printable materials./
作者:	Bible, Michael S.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	75 p.
附註:	Source: Masters Abstracts International, Volume: 56-02.
Contained By:	Masters Abstracts International56-02(E).
標題:	Polymer chemistry. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10242881
ISBN:	9781369426854

The development and characterization of novel metal-organic framework and polymer composites for use as 3D printable materials.
Bible, Michael S.

The development and characterization of novel metal-organic framework and polymer composites for use as 3D printable materials. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 75 p.

Source: Masters Abstracts International, Volume: 56-02.

Thesis (M.S.)--American University, 2016.

In this study, novel metal-organic framework (MOF) and polymer composites were developed for use as 3D printable gas-absorbing materials. Namely, the MOFs HKUST-1 and ZIF-8 were incorporated into ABS polymer matrices at a 10% (w/w) level through the use of a twin-screw compounder. The structure and stability of these novel materials were characterized using infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and powder x-ray diffractometry. Analyses show that composite materials demonstrate high thermal stability and are resistant to degradation by water and humidity. It was additionally determined that incorporated MOFs do not interact chemically with the ABS matrix (no bond formation is observed) but are merely physically distributed within the polymer. Studies of the gas-absorbing properties of the composite materials reveal that ZIF-8 improves the BET surface-area and gas capacity of ABS by a quantity equal to 10% of ZIF-8 alone, while HKUST-1 improves these values only modestly. It has been concluded here that HKUST-1 may be a piezo-sensitive material and, as a result, composites of this particular MOF will need to be processed and tested differently in future studies. The study additionally demonstrates the printability of these and other MOF composites and paves the way for exciting future research on printed MOF materials through the development of optimized printing parameters and material designs.

ISBN: 9781369426854Subjects--Topical Terms:

3173488
Polymer chemistry.

The development and characterization of novel metal-organic framework and polymer composites for use as 3D printable materials.
LDR:02418nmm a2200301 4500 001 2119280
005 20170619080605.5
008 180830s2016 ||||||||||||||||| ||eng d
020 $a 9781369426854
035 $a (MiAaPQ)AAI10242881
035 $a AAI10242881
040 $a MiAaPQ $c MiAaPQ
100 1 $a Bible, Michael S. $0 (orcid)0000-0002-4341-353X $3 3281144
245 1 4 $a The development and characterization of novel metal-organic framework and polymer composites for use as 3D printable materials.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 75 p.
500 $a Source: Masters Abstracts International, Volume: 56-02.
500 $a Adviser: Matthew R. Hartings.
502 $a Thesis (M.S.)--American University, 2016.
520 $a In this study, novel metal-organic framework (MOF) and polymer composites were developed for use as 3D printable gas-absorbing materials. Namely, the MOFs HKUST-1 and ZIF-8 were incorporated into ABS polymer matrices at a 10% (w/w) level through the use of a twin-screw compounder. The structure and stability of these novel materials were characterized using infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and powder x-ray diffractometry. Analyses show that composite materials demonstrate high thermal stability and are resistant to degradation by water and humidity. It was additionally determined that incorporated MOFs do not interact chemically with the ABS matrix (no bond formation is observed) but are merely physically distributed within the polymer. Studies of the gas-absorbing properties of the composite materials reveal that ZIF-8 improves the BET surface-area and gas capacity of ABS by a quantity equal to 10% of ZIF-8 alone, while HKUST-1 improves these values only modestly. It has been concluded here that HKUST-1 may be a piezo-sensitive material and, as a result, composites of this particular MOF will need to be processed and tested differently in future studies. The study additionally demonstrates the printability of these and other MOF composites and paves the way for exciting future research on printed MOF materials through the development of optimized printing parameters and material designs.
590 $a School code: 0008.
650 4 $a Polymer chemistry. $3 3173488
650 4 $a Inorganic chemistry. $3 3173556
650 4 $a Chemistry. $3 516420
690 $a 0495
690 $a 0488
690 $a 0485
710 2 $a American University. $b Chemistry. $3 2104551
773 0 $t Masters Abstracts International $g 56-02(E).
790 $a 0008
791 $a M.S.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10242881