語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Suresh K. AggarwalQuantified Analysi...
~
Ramirez, Anita I.
FindBook
Google Book
Amazon
博客來
Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics./
作者:
Ramirez, Anita I.
面頁冊數:
182 p.
附註:
Source: Dissertation Abstracts International, Volume: 77-07(E), Section: B.
Contained By:
Dissertation Abstracts International77-07B(E).
標題:
Mechanical engineering. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10002929
ISBN:
9781339422879
Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics.
Ramirez, Anita I.
Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics.
- 182 p.
Source: Dissertation Abstracts International, Volume: 77-07(E), Section: B.
Thesis (Ph.D.)--University of Illinois at Chicago, 2015.
The work presented in this thesis pursues further the understanding of fuel spray, combustion, performance, and emissions in an internal combustion engine. Various experimental techniques including x-ray radiography, injection rate measurement, and in-cylinder endoscopy are employed in this work to characterize the effects of various upstream conditions such as injection rate profile and fuel physical properties.
ISBN: 9781339422879Subjects--Topical Terms:
649730
Mechanical engineering.
Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics.
LDR
:03288nmm a2200313 4500
001
2078513
005
20161129073656.5
008
170521s2015 ||||||||||||||||| ||eng d
020
$a
9781339422879
035
$a
(MiAaPQ)AAI10002929
035
$a
AAI10002929
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Ramirez, Anita I.
$3
3194104
245
1 0
$a
Suresh K. AggarwalQuantified Analysis of a Production Diesel Injector Using X-Ray Radiography and Engine Diagnostics.
300
$a
182 p.
500
$a
Source: Dissertation Abstracts International, Volume: 77-07(E), Section: B.
500
$a
Adviser: Suresh K. Aggarwal.
502
$a
Thesis (Ph.D.)--University of Illinois at Chicago, 2015.
520
$a
The work presented in this thesis pursues further the understanding of fuel spray, combustion, performance, and emissions in an internal combustion engine. Various experimental techniques including x-ray radiography, injection rate measurement, and in-cylinder endoscopy are employed in this work to characterize the effects of various upstream conditions such as injection rate profile and fuel physical properties.
520
$a
A single non-evaporating spray from a 6-hole full-production Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) nozzle is studied under engine-like ambient densities with x-ray radiography at the Advanced Photon Source (APS) of Argonne National Laboratory (ANL). Two different injection pressures were investigated and parameters such as fuel mass distribution, spray penetration, cone angle, and spray velocity were obtained. The data acquired with x-ray radiography is used for the development and validation of improved Computational Fluid Dynamic (CFD) models. Rate of injection is studied using the same HEUI in a single cylinder Caterpillar test engine. The injection rate profile is altered to have three levels of initial injection pressure rise. Combustion behavior, engine performance, and emissions information was acquired for three rate profile variations. It is found that NOx emission reduction is achieved when the SOI timing is constant at the penalty of lower power generated in the cycle. However, if CA50 is aligned amongst the three profiles, the NOx emissions and power are constant with a slight penalty in CO emissions.
520
$a
The influence of physical and chemical parameters of fuel is examined in a study of the heavy alcohol, phytol (C20H40O), in internal combustion engine application. Phytol is blended with diesel in 5%, 10%, and 20% by volume. Combustion behavior is similar between pure diesel and the phytol/diesel blends with small differences noted in peak cylinder pressure, ignition delay, and heat release rate in the premix burn phase. Diesel/phytol blends yield marginally lower power values. In-cylinder soot radiation images show combustion instability at the start of the event for the 20% phytol/diesel blend. Overall, NOx emissions are comparable across the different fuels used and no discernible trend is found in CO emissions.
590
$a
School code: 0799.
650
4
$a
Mechanical engineering.
$3
649730
650
4
$a
Automotive engineering.
$3
2181195
650
4
$a
Energy.
$3
876794
690
$a
0548
690
$a
0540
690
$a
0791
710
2
$a
University of Illinois at Chicago.
$b
Mechanical and Industrial Engineering.
$3
2092209
773
0
$t
Dissertation Abstracts International
$g
77-07B(E).
790
$a
0799
791
$a
Ph.D.
792
$a
2015
793
$a
English
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10002929
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9311381
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入