東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Performance enhancement of pipeline ...

Li, Ting.

Linked to FindBook

Google Book

Amazon

博客來

Performance enhancement of pipeline ADCs.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Performance enhancement of pipeline ADCs./
Author:	Li, Ting.
Description:	170 p.
Notes:	Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
Contained By:	Dissertation Abstracts International76-02B(E).
Subject:	Electrical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3640277
ISBN:	9781321256000

Performance enhancement of pipeline ADCs.
Li, Ting.

Performance enhancement of pipeline ADCs. - 170 p.

Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.

Thesis (Ph.D.)--North Dakota State University, 2014.

The pipeline ADC is mainstream architecture in wireless communication and digital consumer products because of its speed, resolution, dynamic performance, and power consumption. However, there are three areas of concern with the pipeline analog-to-digital converter (ADC): power consumption, accuracy, and convergence speed of the digital calibration. The traditional pipeline ADC includes a dedicated front-end sample-and-hold amplifier (SHA), which consumes a significant amount of power. This research presents a novel configuration of the front-end stage with a sample-and-hold function for a SHA-less architecture. In addition, the multi-bit front-end has multiple benefits. Interestingly, if one additional bit is resolved in the front-end stage, then the comparator offset correction ability of this stage is reduced by half. To address this problem, this research presents a novel domain-extended digital error correction algorithm to increase the comparator offset correction ability. In order to improve accuracy, a combination of techniques are used: communicated feedback-capacitor switching (CFCS), gain boost amplifiers, and low noise dynamic comparators. Here, the ADC uses the above mentioned techniques and is fabricated with AMIS 0.5 microm CMOS. The ADC, with an active area of 4.5 mm2, consumes 264 mW when a 32 MHz input is at 75-MS/s sample rate.

ISBN: 9781321256000Subjects--Topical Terms:

649834
Electrical engineering.

Performance enhancement of pipeline ADCs.
LDR:02974nmm a2200289 4500 001 2073143
005 20160914074014.5
008 170521s2014 ||||||||||||||||| ||eng d
020 $a 9781321256000
035 $a (MiAaPQ)AAI3640277
035 $a AAI3640277
040 $a MiAaPQ $c MiAaPQ
100 1 $a Li, Ting. $3 3188372
245 1 0 $a Performance enhancement of pipeline ADCs.
300 $a 170 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
500 $a Adviser: Chao You.
502 $a Thesis (Ph.D.)--North Dakota State University, 2014.
520 $a The pipeline ADC is mainstream architecture in wireless communication and digital consumer products because of its speed, resolution, dynamic performance, and power consumption. However, there are three areas of concern with the pipeline analog-to-digital converter (ADC): power consumption, accuracy, and convergence speed of the digital calibration. The traditional pipeline ADC includes a dedicated front-end sample-and-hold amplifier (SHA), which consumes a significant amount of power. This research presents a novel configuration of the front-end stage with a sample-and-hold function for a SHA-less architecture. In addition, the multi-bit front-end has multiple benefits. Interestingly, if one additional bit is resolved in the front-end stage, then the comparator offset correction ability of this stage is reduced by half. To address this problem, this research presents a novel domain-extended digital error correction algorithm to increase the comparator offset correction ability. In order to improve accuracy, a combination of techniques are used: communicated feedback-capacitor switching (CFCS), gain boost amplifiers, and low noise dynamic comparators. Here, the ADC uses the above mentioned techniques and is fabricated with AMIS 0.5 microm CMOS. The ADC, with an active area of 4.5 mm2, consumes 264 mW when a 32 MHz input is at 75-MS/s sample rate.
520 $a The third area of concern is convergence time, which determines the quality of the digital calibration. The high resolution ADC can be achieved without calibration. Therefore, in order for a digital calibration to be useful, it should minimize the analog circuits and have a reasonable convergence time. The reduced accuracy due to minimized analog circuits can be complemented by the digital calibration. Therefore, the convergence time determines the quality of the digital calibration. In this research a new domain-extended dither-based algorithm increases the convergence speed. Moreover, the novel variable-amplitude domain-extended dither-based algorithm further increases the convergence speed. Matlab simulations illustrate these improvements.
590 $a School code: 0157.
650 4 $a Electrical engineering. $3 649834
650 4 $a Computer engineering. $3 621879
690 $a 0544
690 $a 0464
710 2 $a North Dakota State University. $b Electrical and Computer Engineering. $3 2095311
773 0 $t Dissertation Abstracts International $g 76-02B(E).
790 $a 0157
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3640277