東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Design of polyelectrolyte multilayer...

Sanyal, Oishi.

Linked to FindBook

Google Book

Amazon

博客來

Design of polyelectrolyte multilayer membranes for ion rejection and wastewater effluent treatment.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Design of polyelectrolyte multilayer membranes for ion rejection and wastewater effluent treatment./
Author:	Sanyal, Oishi.
Description:	139 p.
Notes:	Source: Dissertation Abstracts International, Volume: 77-05(E), Section: B.
Contained By:	Dissertation Abstracts International77-05B(E).
Subject:	Chemical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3746354
ISBN:	9781339397061

Design of polyelectrolyte multilayer membranes for ion rejection and wastewater effluent treatment.
Sanyal, Oishi.

Design of polyelectrolyte multilayer membranes for ion rejection and wastewater effluent treatment. - 139 p.

Source: Dissertation Abstracts International, Volume: 77-05(E), Section: B.

Thesis (Ph.D.)--Michigan State University, 2016.

Polyelectrolyte multilayer (PEM) membranes present a special class of nanostructured membranes which have potential applications in a variety of water treatment operations. These membranes are fabricated by the layer-by-layer (LbL) assembly of alternately charged polyelectrolytes on commercial membrane surfaces. A large variety of polyelectrolytes and their varied deposition conditions (pH, number of bilayers etc.) allow very fine tuning of the membrane performance in terms of permeability and rejection. The first part of this thesis is about the application of PEM membranes to the removal of perchlorate ion from water. Being a monovalent ion, it is most effectively removed by a reverse osmosis (RO) membrane. However, these membranes inherently have very low fluxes which lead to high pressure requirements. In our work, we modified the surface of a nanofiltration (NF) membrane by the LbL assembly of oppositely charged polyelectrolytes. The appropriate tuning of the LbL conditions led to the development of a membrane with significantly higher flux than RO membranes but with equivalent perchlorate rejection. This was one of the best trade-offs offered by PEM membranes for monovalent ion rejection as has been reported in literature so far.

ISBN: 9781339397061Subjects--Topical Terms:

560457
Chemical engineering.

Design of polyelectrolyte multilayer membranes for ion rejection and wastewater effluent treatment.
LDR:04181nmm a2200313 4500 001 2071405
005 20160708094703.5
008 170521s2016 ||||||||||||||||| ||eng d
020 $a 9781339397061
035 $a (MiAaPQ)AAI3746354
035 $a AAI3746354
040 $a MiAaPQ $c MiAaPQ
100 1 $a Sanyal, Oishi. $3 3186544
245 1 0 $a Design of polyelectrolyte multilayer membranes for ion rejection and wastewater effluent treatment.
300 $a 139 p.
500 $a Source: Dissertation Abstracts International, Volume: 77-05(E), Section: B.
500 $a Adviser: Ilsoon Lee.
502 $a Thesis (Ph.D.)--Michigan State University, 2016.
520 $a Polyelectrolyte multilayer (PEM) membranes present a special class of nanostructured membranes which have potential applications in a variety of water treatment operations. These membranes are fabricated by the layer-by-layer (LbL) assembly of alternately charged polyelectrolytes on commercial membrane surfaces. A large variety of polyelectrolytes and their varied deposition conditions (pH, number of bilayers etc.) allow very fine tuning of the membrane performance in terms of permeability and rejection. The first part of this thesis is about the application of PEM membranes to the removal of perchlorate ion from water. Being a monovalent ion, it is most effectively removed by a reverse osmosis (RO) membrane. However, these membranes inherently have very low fluxes which lead to high pressure requirements. In our work, we modified the surface of a nanofiltration (NF) membrane by the LbL assembly of oppositely charged polyelectrolytes. The appropriate tuning of the LbL conditions led to the development of a membrane with significantly higher flux than RO membranes but with equivalent perchlorate rejection. This was one of the best trade-offs offered by PEM membranes for monovalent ion rejection as has been reported in literature so far.
520 $a While PEM membranes have mostly shown great potential in ion-rejection studies, they have seldom been tested for real wastewater effluents. The second part of this thesis, therefore, deals with evaluating the applicability of PEM membranes to treating an electrocoagulation (EC)-treated high strength wastewater. Two types of very commonly used polyelectrolyte combinations were tried out -- one of which was an ionically crosslinked system and the other one was covalently crosslinked. Both the types of PEM membranes showed a high level of COD reduction from the feed stream with higher fluxes than commercial RO membranes. One major challenge in using membranes for wastewater treatment is their fouling propensity. Like many other wastewater samples, the EC treated solution also contained a fair amount of organic foulants. These PEM membranes, however, indicated better anti-fouling properties than commercial NF/RO membranes under normal flow conditions.
520 $a The last part of our work was focused on improving the anti-fouling properties of these membranes by the incorporation of clay nanoplatelets within polyelectrolyte multilayers. In this project, a commercial polyethersulfone (PES) membrane was modified by clay-polyelectrolyte composite thin films and tested against the EC effluent under tangential flow conditions. In comparison to the PEM membranes, these clay-PEM (c-PEM) hybrid membranes offered superior anti-fouling properties with higher fluxes and also required lesser number of layers. On crosslinking the polyelectrolytes, the c-PEM membranes yielded improved anti-fouling properties and high COD removal. Introduction of these inorganic nanoplatelets, however, led to a significant decline in the initial flux of the modified membranes as compared to bare PES membranes, which therefore necessitates further optimization. Some strategies which can potentially help in optimizing the performance of these c-PEM membranes have been discussed in this thesis.
590 $a School code: 0128.
650 4 $a Chemical engineering. $3 560457
650 4 $a Analytical chemistry. $3 3168300
650 4 $a Materials science. $3 543314
690 $a 0542
690 $a 0486
690 $a 0794
710 2 $a Michigan State University. $b Chemical Engineering - Doctor of Philosophy. $3 2094749
773 0 $t Dissertation Abstracts International $g 77-05B(E).
790 $a 0128
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3746354