東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Sol-gel based fabrication methods fo...

Huang, Yin.

FindBook

Google Book

Amazon

博客來

Sol-gel based fabrication methods for photonic crystals.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Sol-gel based fabrication methods for photonic crystals./
作者:	Huang, Yin.
面頁冊數:	51 p.
附註:	Source: Masters Abstracts International, Volume: 54-06.
Contained By:	Masters Abstracts International54-06(E).
標題:	Nanotechnology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1593046
ISBN:	9781321891669

Sol-gel based fabrication methods for photonic crystals.
Huang, Yin.

Sol-gel based fabrication methods for photonic crystals. - 51 p.

Source: Masters Abstracts International, Volume: 54-06.

Thesis (M.S.)--Iowa State University, 2015.

Photonic Crystals (PhCs) composed of periodic change of dielectric materials are capable of manipulating the interaction between photon and materials and thus controlling the flow of light. Undergone a rapid theoretical and technical exploration during the past three decades, PhC structures have been implemented in numerous photonic devices and have been found useful for widespread applications, such as communication, optical sensor, energy harvest, and display. As PhC-based devices operating in the visible or near Infrared (NIR) wavelength regimes, the period of the dielectric constant modulation is sub-wavelength and below one micrometer. At such a length scale, the fabrication of PhC structure with a sufficient precision and size is challenging,

ISBN: 9781321891669Subjects--Topical Terms:

526235
Nanotechnology.

Sol-gel based fabrication methods for photonic crystals.
LDR:03839nmm a2200301 4500 001 2066732
005 20160204121804.5
008 170521s2015 ||||||||||||||||| ||chi d
020 $a 9781321891669
035 $a (MiAaPQ)AAI1593046
035 $a AAI1593046
040 $a MiAaPQ $c MiAaPQ
100 1 $a Huang, Yin. $3 3181567
245 1 0 $a Sol-gel based fabrication methods for photonic crystals.
300 $a 51 p.
500 $a Source: Masters Abstracts International, Volume: 54-06.
500 $a Adviser: Meng Lu.
502 $a Thesis (M.S.)--Iowa State University, 2015.
520 $a Photonic Crystals (PhCs) composed of periodic change of dielectric materials are capable of manipulating the interaction between photon and materials and thus controlling the flow of light. Undergone a rapid theoretical and technical exploration during the past three decades, PhC structures have been implemented in numerous photonic devices and have been found useful for widespread applications, such as communication, optical sensor, energy harvest, and display. As PhC-based devices operating in the visible or near Infrared (NIR) wavelength regimes, the period of the dielectric constant modulation is sub-wavelength and below one micrometer. At such a length scale, the fabrication of PhC structure with a sufficient precision and size is challenging,
520 $a In this thesis, sol-gel based fabrication methods are demonstrated to fabricate PhC slabs on a glass substrate and three dimensional (3D) PhC inside a capillary tube. The one-dimensional (1D) and two-dimensional (2D) PhC slabs, which are also known as guided mode resonant (GMR) filters, have dielectric thin film with a high refractive index (n = 1.78), functions as the light confinement layer. Meanwhile, the imprinted periodic structure on hybrid inorganic-organic sol-gel thin film couples the light excitation into PhC slab mode. It has been studied for their capabilities of generating narrowband reflections in visible and NIR portions of the spectrum. The sol-gel based imprint method uses titanium alkoxides sol-gel solution to transfer desired patterns from a master mold to the glass substrate within 5 minutes. This one-step fabrication process warrants a simple, rapid, and low-cost formation of PhC slab structures over a surface area as large as 1 cm2, which is currently limited by size of available imprint mold. Also, our sol-gel imprint approach enabled the tuning of PhC slab modes by pre- and post-imprint processes. The fabricated PhC slabs were characterized and their applications in refractometry-based biosensing were explored. The 1D PhC slab filter exhibited a Q factor of 70 at resonant wavelength while 2D PhC slab filter had Q factor of 158 at resonant wavelength. As for refractometric biosensor, a bulk sensitivity of 50 nm per refractive index unit and the detection of monolayer of polyamino acid have been measured.
520 $a In addition, efforts have been devoted to investigate the fabrication of 3D PhC inside a capillary tube, where the self-assembly polystyrene (PS) sphere was exploited as the template. Within a few simple steps, inverse opal PhC structures were generated inside glass tubes and can perfectly work as nanoscale optofluidics. With volume ratios of polystyrene and sol-gel solution from 5:1 to 7:1, the fabricated inverse opal PhC structures were discovered to be more compact and ordered. By trying different PS sphere diameters of 185nm, 236 nm, 269nm, and 307nm, the resonant wavelengths of inverse opal PhCs have been found a linear redshift with an increase of PS sphere diameter.
590 $a School code: 0097.
650 4 $a Nanotechnology. $3 526235
650 4 $a Condensed matter physics. $3 3173567
690 $a 0652
690 $a 0611
710 2 $a Iowa State University. $b Electrical and Computer Engineering. $3 1018524
773 0 $t Masters Abstracts International $g 54-06(E).
790 $a 0097
791 $a M.S.
792 $a 2015
793 $a Chinese
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1593046