東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

CFD modeling of multiphase counter-c...

Yang, Li.

FindBook

Google Book

Amazon

博客來

CFD modeling of multiphase counter-current flow in packed bed reactor for carbon capture.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	CFD modeling of multiphase counter-current flow in packed bed reactor for carbon capture./
作者:	Yang, Li.
面頁冊數:	137 p.
附註:	Source: Dissertation Abstracts International, Volume: 77-03(E), Section: B.
Contained By:	Dissertation Abstracts International77-03B(E).
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3731309
ISBN:	9781339176956

CFD modeling of multiphase counter-current flow in packed bed reactor for carbon capture.
Yang, Li.

CFD modeling of multiphase counter-current flow in packed bed reactor for carbon capture. - 137 p.

Source: Dissertation Abstracts International, Volume: 77-03(E), Section: B.

Thesis (Ph.D.)--University of Kentucky, 2015.

Packed bed reactors with counter-current, gas-liquid flows have been considered to be applicable in CO2 capture systems for post-combustion processing from fossil-fueled power production units. However, the hydrodynamics within the packing used in these reactors under counter-current flow has not been assessed to provide insight into design and operational parameters that may impact reactor and reaction efficiencies. Hence, experimental testing of a laboratory-scale spherical ball, packed bed with two-phase flow was accomplished and then a meso-scale 3D CFD model was developed to numerically simulate the conditions and outcomes of the experimental tests. Also, the hydrodynamics of two-phase flow in a packed bed with structured packing were simulated using a mesoscale, 3D CFD model and then validated using empirical models.

ISBN: 9781339176956Subjects--Topical Terms:

649730
Mechanical engineering.

CFD modeling of multiphase counter-current flow in packed bed reactor for carbon capture.
LDR:03211nmm a2200289 4500 001 2066709
005 20151205153434.5
008 170521s2015 ||||||||||||||||| ||eng d
020 $a 9781339176956
035 $a (MiAaPQ)AAI3731309
035 $a AAI3731309
040 $a MiAaPQ $c MiAaPQ
100 1 $a Yang, Li. $3 1029288
245 1 0 $a CFD modeling of multiphase counter-current flow in packed bed reactor for carbon capture.
300 $a 137 p.
500 $a Source: Dissertation Abstracts International, Volume: 77-03(E), Section: B.
500 $a Adviser: Kozo Saito.
502 $a Thesis (Ph.D.)--University of Kentucky, 2015.
520 $a Packed bed reactors with counter-current, gas-liquid flows have been considered to be applicable in CO2 capture systems for post-combustion processing from fossil-fueled power production units. However, the hydrodynamics within the packing used in these reactors under counter-current flow has not been assessed to provide insight into design and operational parameters that may impact reactor and reaction efficiencies. Hence, experimental testing of a laboratory-scale spherical ball, packed bed with two-phase flow was accomplished and then a meso-scale 3D CFD model was developed to numerically simulate the conditions and outcomes of the experimental tests. Also, the hydrodynamics of two-phase flow in a packed bed with structured packing were simulated using a mesoscale, 3D CFD model and then validated using empirical models.
520 $a The CFD model successfully characterized the hydrodynamics inside the packing, with a focus on parameters such as the wetted surface areas, gas-liquid interactions, liquid distributions, pressure drops, liquid holdups, film thicknesses and flow regimes. The simulation results clearly demonstrated the development of and changes in liquid distributions, wetted areas and film thicknesses under various gas and liquid flow rates. Gas and liquid interactions were observed to occur at the interface of the gas and liquid through liquid entrainment and droplet formation, and it became more dominant as the Reynolds numbers increased. Liquid film thicknesses in the structured packing were much thinner than in the spherical ball packing, and increased with increasing liquid flow rates. Gas flow rates had no significant effect on film thicknesses. Film flow and trickle flow regimes were found in both the spherical ball and structured packing.
520 $a A macro-scale, porous model was also developed which was less computationally intensive than the meso-scale, 3D CFD model. The macro-scale model was used to study the spherical ball packing and to modify its closure equations. It was found that the Ergun equation, typically used in the porous model, was not suitable for multi-phase flow. Hence, it was modified by replacing porosity with the actual pore volume within the liquid phase; this modification successfully accounted for liquid holdup which was predicted via a proposed equation.
590 $a School code: 0102.
650 4 $a Mechanical engineering. $3 649730
690 $a 0548
710 2 $a University of Kentucky. $b Mechanical Engineering. $3 3181538
773 0 $t Dissertation Abstracts International $g 77-03B(E).
790 $a 0102
791 $a Ph.D.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3731309