東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Multispectral Image Road Extraction ...

Chen, Bin.

FindBook

Google Book

Amazon

博客來

Multispectral Image Road Extraction Based Upon Automated Map Conflation.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Multispectral Image Road Extraction Based Upon Automated Map Conflation./
作者:	Chen, Bin.
面頁冊數:	146 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-08(E), Section: B.
Contained By:	Dissertation Abstracts International76-08B(E).
標題:	Remote sensing. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3689022
ISBN:	9781321680201

Multispectral Image Road Extraction Based Upon Automated Map Conflation.
Chen, Bin.

Multispectral Image Road Extraction Based Upon Automated Map Conflation. - 146 p.

Source: Dissertation Abstracts International, Volume: 76-08(E), Section: B.

Thesis (Ph.D.)--Rochester Institute of Technology, 2015.

Road network extraction from remotely sensed imagery enables many important and diverse applications such as vehicle tracking, drone navigation, and intelligent transportation studies. There are, however, a number of challenges to road detection from an image. Road pavement material, width, direction, and topology vary across a scene. Complete or partial occlusions caused by nearby buildings, trees, and the shadows cast by them, make maintaining road connectivity difficult. The problems posed by occlusions are exacerbated with the increasing use of oblique imagery from aerial and satellite platforms. Further, common objects such as rooftops and parking lots are made of materials similar or identical to road pavements. This problem of common materials is a classic case of a single land cover material existing for different land use scenarios.

ISBN: 9781321680201Subjects--Topical Terms:

535394
Remote sensing.

Multispectral Image Road Extraction Based Upon Automated Map Conflation.
LDR:03830nmm a2200313 4500 001 2066582
005 20151205153414.5
008 170521s2015 ||||||||||||||||| ||eng d
020 $a 9781321680201
035 $a (MiAaPQ)AAI3689022
035 $a AAI3689022
040 $a MiAaPQ $c MiAaPQ
100 1 $a Chen, Bin. $3 1253302
245 1 0 $a Multispectral Image Road Extraction Based Upon Automated Map Conflation.
300 $a 146 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-08(E), Section: B.
500 $a Adviser: Anthony Vodacek.
502 $a Thesis (Ph.D.)--Rochester Institute of Technology, 2015.
520 $a Road network extraction from remotely sensed imagery enables many important and diverse applications such as vehicle tracking, drone navigation, and intelligent transportation studies. There are, however, a number of challenges to road detection from an image. Road pavement material, width, direction, and topology vary across a scene. Complete or partial occlusions caused by nearby buildings, trees, and the shadows cast by them, make maintaining road connectivity difficult. The problems posed by occlusions are exacerbated with the increasing use of oblique imagery from aerial and satellite platforms. Further, common objects such as rooftops and parking lots are made of materials similar or identical to road pavements. This problem of common materials is a classic case of a single land cover material existing for different land use scenarios.
520 $a This work addresses these problems in road extraction from geo-referenced imagery by leveraging the OpenStreetMap digital road map to guide image-based road extraction. The crowd-sourced cartography has the advantages of worldwide coverage that is constantly updated. The derived road vectors follow only roads and so can serve to guide image-based road extraction with minimal confusion from occlusions and changes in road material. On the other hand, the vector road map has no information on road widths and misalignments between the vector map and the geo-referenced image are small but nonsystematic. Properly correcting misalignment between two geospatial datasets, also known as map conflation, is an essential step.
520 $a A generic framework requiring minimal human intervention is described for multispectral image road extraction and automatic road map conflation. The approach relies on the road feature generation of a binary mask and a corresponding curvilinear image. A method for generating the binary road mask from the image by applying a spectral measure is presented. The spectral measure, called anisotropy-tunable distance (ATD), differs from conventional measures and is created to account for both changes of spectral direction and spectral magnitude in a unified fashion. The ATD measure is particularly suitable for differentiating urban targets such as roads and building rooftops. The curvilinear image provides estimates of the width and orientation of potential road segments. Road vectors derived from OpenStreetMap are then conflated to image road features by applying junction matching and intermediate point matching, followed by refinement with mean-shift clustering and morphological processing to produce a road mask with piecewise width estimates.
520 $a The proposed approach is tested on a set of challenging, large, and diverse image data sets and the performance accuracy is assessed. The method is effective for road detection and width estimation of roads, even in challenging scenarios when extensive occlusion occurs.
590 $a School code: 0465.
650 4 $a Remote sensing. $3 535394
650 4 $a Geographic information science and geodesy. $3 2122917
690 $a 0799
690 $a 0370
710 2 $a Rochester Institute of Technology. $b Imaging Science. $3 1019498
773 0 $t Dissertation Abstracts International $g 76-08B(E).
790 $a 0465
791 $a Ph.D.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3689022