東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

New paradigms to control coupled pow...

Liette, Jared.

FindBook

Google Book

Amazon

博客來

New paradigms to control coupled powertrain and frame motions using concurrent passive and active mounting schemes.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	New paradigms to control coupled powertrain and frame motions using concurrent passive and active mounting schemes./
作者:	Liette, Jared.
面頁冊數:	175 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-06(E), Section: B.
Contained By:	Dissertation Abstracts International76-06B(E).
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3672323
ISBN:	9781321496482

New paradigms to control coupled powertrain and frame motions using concurrent passive and active mounting schemes.
Liette, Jared.

New paradigms to control coupled powertrain and frame motions using concurrent passive and active mounting schemes. - 175 p.

Source: Dissertation Abstracts International, Volume: 76-06(E), Section: B.

Thesis (Ph.D.)--The Ohio State University, 2014.

This item must not be sold to any third party vendors.

The topic of this scholarly research is motivated by the need for superior control of vehicle powertrain vibration, commonly accomplished using 3 or 4 passive mounts. However, emerging design trends (such as higher power density powertrains and lightweight structures) necessitate a hybrid approach utilizing active and passive methods to meet more stringent system performance targets. The chief research objective is to acquire fundamental understanding of dynamic interactions among multiple active and passive paths in a powertrain mounting system for improved control of multi-dimensional motion, in the presence of a rigid frame placed on four bushings. All hybrid paths are assumed to be an actuator in series with an elastomeric mount; and discrete linear time-invariant deterministic systems are assumed with small motions, harmonic excitations, steady state behavior, and no kinematic nonlinear effects. Also, passive elements are assumed massless while active elements possess mass. Additionally, passive torque roll axis motion decoupling concepts are explored to enhance active control capabilities given certain practical constraints. Analytical, computational, and experimental methods are utilized though no real-time control is done.

ISBN: 9781321496482Subjects--Topical Terms:

649730
Mechanical engineering.

New paradigms to control coupled powertrain and frame motions using concurrent passive and active mounting schemes.
LDR:04480nmm a2200337 4500 001 2063312
005 20151027100451.5
008 170521s2014 ||||||||||||||||| ||eng d
020 $a 9781321496482
035 $a (MiAaPQ)AAI3672323
035 $a AAI3672323
040 $a MiAaPQ $c MiAaPQ
100 1 $a Liette, Jared. $3 3177816
245 1 0 $a New paradigms to control coupled powertrain and frame motions using concurrent passive and active mounting schemes.
300 $a 175 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-06(E), Section: B.
500 $a Adviser: Rajendra Singh.
502 $a Thesis (Ph.D.)--The Ohio State University, 2014.
506 $a This item must not be sold to any third party vendors.
506 $a This item must not be added to any third party search indexes.
520 $a The topic of this scholarly research is motivated by the need for superior control of vehicle powertrain vibration, commonly accomplished using 3 or 4 passive mounts. However, emerging design trends (such as higher power density powertrains and lightweight structures) necessitate a hybrid approach utilizing active and passive methods to meet more stringent system performance targets. The chief research objective is to acquire fundamental understanding of dynamic interactions among multiple active and passive paths in a powertrain mounting system for improved control of multi-dimensional motion, in the presence of a rigid frame placed on four bushings. All hybrid paths are assumed to be an actuator in series with an elastomeric mount; and discrete linear time-invariant deterministic systems are assumed with small motions, harmonic excitations, steady state behavior, and no kinematic nonlinear effects. Also, passive elements are assumed massless while active elements possess mass. Additionally, passive torque roll axis motion decoupling concepts are explored to enhance active control capabilities given certain practical constraints. Analytical, computational, and experimental methods are utilized though no real-time control is done.
520 $a First, the torque roll axis motion decoupling concept is studied in a 12 degree of freedom model of a realistic powertrain and coupled frame. Deficiency of prior literature neglecting the need for a physically realizable system is overcome by deriving improved mount compatibility conditions, implemented in new decoupling paradigms to ensure more realistic mount positions. It is mathematically shown that full decoupling is not possible for a practical system, and partial decoupling paradigms are pursued to ensure that only the powertrain roll motion is dominant. This constitutes as a major contribution.
520 $a The interaction between hybrid paths is studied next as part of a resonating two path source-path-receiver system with 6 degrees of freedom, simplified from a realistic powertrain and frame system. The main contribution of this work is derivation of a performance index (dictated by passive system dynamics) that characterizes this interaction for source mass motion control; two passive system parameters (hybrid path damping and disturbance force location) emerge that drastically change the performance index. Design paradigms are developed for desirable path interactions, and limited experimental validation demonstrates motion control concept at 400 Hz.
520 $a Finally, a new 24 degree of freedom mathematical model for a coupled powertrain and frame is developed with versatility to select passive only, active only, or hybrid powertrain paths. Additionally, new torque roll axis decoupling paradigms are derived for non-identical powertrain mount properties and orientations, and the new model allows for arbitrary or torque roll axis designed mounts. Improved vibration control is achieved with hybrid mounts over active or passive only, and it is found that a minimum of two actuators should be used for a realistic powertrain mounting system. Future work should include construction of a powertrain and frame experiment to examine hybrid path effectiveness and torque roll axis mounting schemes, examination of active motion control for transient powertrain events, and application of real-time control.
590 $a School code: 0168.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Automotive engineering. $3 2181195
690 $a 0548
690 $a 0540
710 2 $a The Ohio State University. $b Mechanical Engineering. $3 1684523
773 0 $t Dissertation Abstracts International $g 76-06B(E).
790 $a 0168
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3672323