東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

An ultra-low power voltage regulator...

Wang, Chao.

FindBook

Google Book

Amazon

博客來

An ultra-low power voltage regulator system for wireless sensor networks powered by energy harvesting.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	An ultra-low power voltage regulator system for wireless sensor networks powered by energy harvesting./
作者:	Wang, Chao.
面頁冊數:	137 p.
附註:	Source: Dissertation Abstracts International, Volume: 76-03(E), Section: B.
Contained By:	Dissertation Abstracts International76-03B(E).
標題:	Electrical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3644505
ISBN:	9781321327557

An ultra-low power voltage regulator system for wireless sensor networks powered by energy harvesting.
Wang, Chao.

An ultra-low power voltage regulator system for wireless sensor networks powered by energy harvesting. - 137 p.

Source: Dissertation Abstracts International, Volume: 76-03(E), Section: B.

Thesis (Ph.D.)--University of Maryland, College Park, 2014.

This item must not be sold to any third party vendors.

A DC-DC converter is an important power management module as it converts one DC voltage level to another suitable for powering a desired electronic system. It also stabilizes the output voltage when fluctuations appear in the power supplies. For those wireless sensor networks (WSNs) powered by energy harvesting, the DC-DC converter is usually a linear regulator and it resides at the last stage of the whole energy harvesting system just before the empowering sensor node. Due to the low power densities of energy sources, one may have to limit the quiescent current of the linear regulator in the sub-muA regime. This severe restriction on quiescent current could greatly compromise other performance aspects, especially the transient response.

ISBN: 9781321327557Subjects--Topical Terms:

649834
Electrical engineering.

An ultra-low power voltage regulator system for wireless sensor networks powered by energy harvesting.
LDR:03167nmm a2200301 4500 001 2061798
005 20151020075129.5
008 170521s2014 eng d
020 $a 9781321327557
035 $a (MiAaPQ)AAI3644505
035 $a AAI3644505
040 $a MiAaPQ $c MiAaPQ
100 1 $a Wang, Chao. $3 3176114
245 1 3 $a An ultra-low power voltage regulator system for wireless sensor networks powered by energy harvesting.
300 $a 137 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-03(E), Section: B.
500 $a Adviser: Martin Peckerar.
502 $a Thesis (Ph.D.)--University of Maryland, College Park, 2014.
506 $a This item must not be sold to any third party vendors.
520 $a A DC-DC converter is an important power management module as it converts one DC voltage level to another suitable for powering a desired electronic system. It also stabilizes the output voltage when fluctuations appear in the power supplies. For those wireless sensor networks (WSNs) powered by energy harvesting, the DC-DC converter is usually a linear regulator and it resides at the last stage of the whole energy harvesting system just before the empowering sensor node. Due to the low power densities of energy sources, one may have to limit the quiescent current of the linear regulator in the sub-muA regime. This severe restriction on quiescent current could greatly compromise other performance aspects, especially the transient response.
520 $a This dissertation reports a voltage regulator system topology which utilizes the sensor node state information to achieve ultra-low power consumption. The regulator system is composed of two regulators with different current driving abilities and quiescent current consumptions. The key idea is to switch between the two regulators depending on the sensor state. Since the "right" regulator is used at the "right" time, the average quiescent current of the regulator system is minimized, and the trade-off between low quiescent current and fast transient response has been eliminated. In order to minimize the average quiescent current of the system, nano-ampere reference current design is studied, and the proposed reference current circuit is shown (theoretically and experimentally) to reduce the supply voltage dependence by 5X. The regulator system has been fabricated and tested using an ON Semiconductor 0.5 &mgr;m process. It has been verified through experiments that the proposed system reduces the quiescent current by 3X over the state-of-the-art in the literature; and, more importantly, it achieves low quiescent current, low dropout voltage, and fast transient response with small output voltage variation all at the same time. The thesis further presents data on the application of energy harvesting system deriving energies from various RF signals to power a commercial off-shelf wireless sensor node.
590 $a School code: 0117.
650 4 $a Electrical engineering. $3 649834
650 4 $a Energy. $3 876794
690 $a 0544
690 $a 0791
710 2 0 $a University of Maryland, College Park. $b Electrical Engineering. $3 1018746
773 0 $t Dissertation Abstracts International $g 76-03B(E).
790 $a 0117
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3644505