東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Equilibration and stability in porou...

Wright, James.

FindBook

Google Book

Amazon

博客來

Equilibration and stability in porous and dense solid oxide fuel cell materials: Samarium-doped ceria and strontium iron molybdenum oxide.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Equilibration and stability in porous and dense solid oxide fuel cell materials: Samarium-doped ceria and strontium iron molybdenum oxide./
作者:	Wright, James.
面頁冊數:	124 p.
附註:	Source: Dissertation Abstracts International, Volume: 75-05(E), Section: B.
Contained By:	Dissertation Abstracts International75-05B(E).
標題:	Materials science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3608520
ISBN:	9781303666803

Equilibration and stability in porous and dense solid oxide fuel cell materials: Samarium-doped ceria and strontium iron molybdenum oxide.
Wright, James.

Equilibration and stability in porous and dense solid oxide fuel cell materials: Samarium-doped ceria and strontium iron molybdenum oxide. - 124 p.

Source: Dissertation Abstracts International, Volume: 75-05(E), Section: B.

Thesis (Ph.D.)--The University of Utah, 2013.

This item must not be sold to any third party vendors.

Solid oxide fuel cells (SOFCs) are electrochemical generators: they convert chemical energy into electrical energy using solid-state components. The electrolyte must simultaneously allow the passage of oxygen ions from cathode to anode, while preventing the passage of electrons from anode to cathode.

ISBN: 9781303666803Subjects--Topical Terms:

543314
Materials science.

Equilibration and stability in porous and dense solid oxide fuel cell materials: Samarium-doped ceria and strontium iron molybdenum oxide.
LDR:03538nmm a2200337 4500 001 2059945
005 20150822105424.5
008 170521s2013 ||||||||||||||||| ||eng d
020 $a 9781303666803
035 $a (MiAaPQ)AAI3608520
035 $a AAI3608520
040 $a MiAaPQ $c MiAaPQ
100 1 $a Wright, James. $3 1683824
245 1 0 $a Equilibration and stability in porous and dense solid oxide fuel cell materials: Samarium-doped ceria and strontium iron molybdenum oxide.
300 $a 124 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-05(E), Section: B.
500 $a Adviser: Anil V. Virkar.
502 $a Thesis (Ph.D.)--The University of Utah, 2013.
506 $a This item must not be sold to any third party vendors.
520 $a Solid oxide fuel cells (SOFCs) are electrochemical generators: they convert chemical energy into electrical energy using solid-state components. The electrolyte must simultaneously allow the passage of oxygen ions from cathode to anode, while preventing the passage of electrons from anode to cathode.
520 $a Porous samples of Sm2O3-doped CeO2 (samaria-doped ceria, SDC) of composition Sm0.15Ce0.85O2-d were made. Electrical conductivity was measured using a 4-probe DC method over a wide range of temperatures and oxygen partial pressures. Conductivity rapidly stabilized at any given temperature consistent with the attainment of thermodynamic equilibrium corresponding to the imposed conditions. The ionic transference number of SDC at 400 °C in hydrogen was only &sim; 0.4, which showed that the electrolytic domain of SDC at and above 400 °C was rather narrow. This also suggested that SDC is not a suitable electrolyte without a thin electron blocking layer.
520 $a Sr2Fe1.5Mo0.5O6-delta (SFMO) powders were synthesized by combustion synthesis. Porous samples were formed and electrical conductivity was measured by a four-point DC technique over a temperature range from 200 °C to 800 °C in air and in hydrogen. It was observed that Sr2Fe1.5Mo0.5O 6-delta is stable at 800 °C in water-containing atmospheres. However, it reacts with water at low temperatures. Reaction of Sr2Fe 1.5Mo0.5O6-delta with water at low temperatures is a potential shortcoming of this material.
520 $a The previous work demonstrated instability in water-containing atmospheres due to decomposition of SFMO into strontium hydroxides and di-hydroxides. In this work, we demonstrated that SFMO was also unstable in dry atmospheres, such as ultra-high-purity (UHP) hydrogen, and that different decay products result whether the imposed atmospheres are oxidizing or reducing.
520 $a Powders with particles that are nanometers in diameter are desirable for creating materials with enhanced electrical, catalytic, and ionic properties. A method based on combustion synthesis for preparing nanocrystalline powder was investigated and samarium-doped ceria (SDC) was synthesized. The resulting products were characterized by XRD, TEM, and BET. The effect of fuel content in the starting mixture on the powder grain size was investigated, and the requirements for nanosized powders were demonstrated. Nanosized SDC powders showed improved performance in a fuel cell compared with conventional SDC powders.
590 $a School code: 0240.
650 4 $a Materials science. $3 543314
650 4 $a Engineering. $3 586835
690 $a 0794
690 $a 0537
710 2 $a The University of Utah. $b Materials Science and Engineering. $3 2093531
773 0 $t Dissertation Abstracts International $g 75-05B(E).
790 $a 0240
791 $a Ph.D.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3608520