語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
The effect of composition on the lin...
~
Ogebule, Oluwaseyi.
FindBook
Google Book
Amazon
博客來
The effect of composition on the linear and nonlinear mechanical properties of particulate filled elastomers.
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
正題名/作者:
The effect of composition on the linear and nonlinear mechanical properties of particulate filled elastomers./
作者:
Ogebule, Oluwaseyi.
面頁冊數:
206 p.
附註:
Source: Dissertation Abstracts International, Volume: 75-06(E), Section: B.
Contained By:
Dissertation Abstracts International75-06B(E).
標題:
Engineering, Chemical. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3613251
ISBN:
9781303755095
The effect of composition on the linear and nonlinear mechanical properties of particulate filled elastomers.
Ogebule, Oluwaseyi.
The effect of composition on the linear and nonlinear mechanical properties of particulate filled elastomers.
- 206 p.
Source: Dissertation Abstracts International, Volume: 75-06(E), Section: B.
Thesis (Ph.D.)--Purdue University, 2013.
Engineering elastomers are materials capable of undergoing large deformation upon load application and recovering upon load removal. From car tires to building vibration isolator systems, elastomers are the most versatile of engineering materials. The inclusion of particulate fillers into elastomers enhances their mechanical properties (modulus, tensile strength, toughness, tear resistance, etc) thereby extending their applicability to more demanding functions. The automotive, healthcare, construction, adhesives and consumer products are some of the many industries that produce finished goods containing elastomeric parts.
ISBN: 9781303755095Subjects--Topical Terms:
1018531
Engineering, Chemical.
The effect of composition on the linear and nonlinear mechanical properties of particulate filled elastomers.
LDR
:04780nam a2200325 4500
001
1969166
005
20141222143615.5
008
150210s2013 ||||||||||||||||| ||eng d
020
$a
9781303755095
035
$a
(MiAaPQ)AAI3613251
035
$a
AAI3613251
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Ogebule, Oluwaseyi.
$3
2106444
245
1 4
$a
The effect of composition on the linear and nonlinear mechanical properties of particulate filled elastomers.
300
$a
206 p.
500
$a
Source: Dissertation Abstracts International, Volume: 75-06(E), Section: B.
500
$a
Adviser: James M. Caruthers.
502
$a
Thesis (Ph.D.)--Purdue University, 2013.
520
$a
Engineering elastomers are materials capable of undergoing large deformation upon load application and recovering upon load removal. From car tires to building vibration isolator systems, elastomers are the most versatile of engineering materials. The inclusion of particulate fillers into elastomers enhances their mechanical properties (modulus, tensile strength, toughness, tear resistance, etc) thereby extending their applicability to more demanding functions. The automotive, healthcare, construction, adhesives and consumer products are some of the many industries that produce finished goods containing elastomeric parts.
520
$a
Despite the various concepts on reinforcement in filled elastomers, a complete understanding of their linear viscoelastic properties and the nonlinear mechanical properties, including stress softening (Mullins), strain dependent dynamic modulus (Payne) and others remains elusive. Furthermore, studies on filled elastomers have failed to produce a unifying perspective on the relationship between the microstructural composition and the observed macroscopic response to deformation. To further the current understanding of the underlying physics of elastomer reinforcement, a comprehensive study on the effect of composition was undertaken.
520
$a
A major challenge in the application of the Time-Temperature Superposition (TTS) principle for filled elastomers rests on the difficulty of conducting experiments in their linear regime, which could be at strains even lower than 10-3. In this work, the linear viscoelastic behavior of filled elastomers was studied via the successful application of TTS at extremely small strains using the double sandwich shear geometry. Well-defined master curves were constructed for a series of carbon black filled SBR and Polybutadiene elastomers. In addition, an investigation of the effects of filler volume fraction and structure on the full linear viscoelastic response was carried out. A critical analysis of the superposed data showed correlation of linear viscoelastic properties to measurable filler parameters specifically the effective volume fraction, ϕeff, in which allowed for the first time collapsing on a single master curve the viscoelastic storage and loss moduli for all filled elastomers studied.
520
$a
Nonlinear mechanical behavior was investigated on fumed silica filled Poly(dimethylsiloxane) rubber. For the first time, necking was observed for a lightly cross-linked poly(dimethylsiloxane) elastomer filled with 30 phr (parts per hundred rubber) or more of high surface area (≥300 m 2/g) fumed silica. A series of linear and nonlinear mechanical properties of the necked material were studied including (i) linear and nonlinear dynamic shear analysis including the Payne effect, (ii) uniaxial tension experiments including the Mullins effect, (iii) tensile strength, and (iv) tear resistance via the 'trouser' test. The ultimate properties of the necked material were superior to its un-necked counterpart and both the Mullins and Payne effects were present in the necked material. The dynamic modulus exhibited anisotropy with respect to the direction of the necking deformation, where the anisotropy was not found in fumed silica filled PDMS elastomers that did not neck although the materials were pre-stretched to similar strains. Based upon these experimental observations, it was been postulated that necking occurs due to the breakage of delicate highly branched aggregates at the points of local stress concentrations. The preferential breakage of the most mechanically distressed aggregates will result in a more regular filler-matrix network, giving rise to higher ultimate properties of the necked material. This finding challenges the aggregate breakage postulate as a primary mechanism for the Mullins effect.
590
$a
School code: 0183.
650
4
$a
Engineering, Chemical.
$3
1018531
650
4
$a
Engineering, Materials Science.
$3
1017759
650
4
$a
Chemistry, Polymer.
$3
1018428
690
$a
0542
690
$a
0794
690
$a
0495
710
2
$a
Purdue University.
$b
Chemical Engineering.
$3
1019117
773
0
$t
Dissertation Abstracts International
$g
75-06B(E).
790
$a
0183
791
$a
Ph.D.
792
$a
2013
793
$a
English
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3613251
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9264173
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入