東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Electron roles in extreme ultraviole...

Catalfano, Mark.

Linked to FindBook

Google Book

Amazon

博客來

Electron roles in extreme ultraviolet lithography mirror contamination and flashover.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Electron roles in extreme ultraviolet lithography mirror contamination and flashover./
Author:	Catalfano, Mark.
Description:	89 p.
Notes:	Source: Masters Abstracts International, Volume: 52-04.
Contained By:	Masters Abstracts International52-04(E).
Subject:	Engineering, Nuclear. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1549325
ISBN:	9781303614583

Electron roles in extreme ultraviolet lithography mirror contamination and flashover.
Catalfano, Mark.

Electron roles in extreme ultraviolet lithography mirror contamination and flashover. - 89 p.

Source: Masters Abstracts International, Volume: 52-04.

Thesis (M.S.)--Purdue University, 2013.

The purpose of this study was to characterize and study the contamination behavior of residual hydrocarbons and water vapor in a vacuum environment similar to that suited to the performance of EUV Lithography devices. A 50nm ruthenium film deposited on a silicon surface which served to simulate the Ru coated mirrors in a typical lithography setup was bombarded with 13.5 nm wavelength light at a grazing angle. We then studied in real-time the contamination effect by using extreme ultraviolet photoelectron spectroscopy (EUPS). This allowed us to examine the behavior of the contaminants as they formed dipoles. By monitoring X-Ray Photoelectron Spectroscopy (XPS) as a function of angle, we determined that carbon species may be more prevalent in the normal directions, while water and related species tend to be at grazing angles. While characterizing the contamination is certainly important for finding ways of mitigating it, we also attempted to prove that the electrons from a typical EUV source are just as important in terms of causing contamination if not more so than the light itself. By monitoring the contamination with both AES and XPS together, we were able to prove that in the absence of electrons the carbon buildup was far reduced. Similar results were found while studying the grazing angle reflectivity of the ruthenium sample. Electrons also proved to be important in surface flashover, a phenomenon in which the polarity on the surface can suddenly switch from negative to positive over a course of seconds. We saw this effect on gold and examined it in real-time with the help of secondary electron spectroscopy (SES). The flashover effect seemed to be defect driven. Interestingly, there was a dependence on energy change: when changing electrons from a lower to higher energy a flashover was observed, but not while changing from a high to a low energy. While we observed this on gold, silicon, and carbon it could certainly be extended to occurring on the photoresist of a typical EUV lithography setup.

ISBN: 9781303614583Subjects--Topical Terms:

1043651
Engineering, Nuclear.

Electron roles in extreme ultraviolet lithography mirror contamination and flashover.
LDR:02881nam a2200277 4500 001 1963320
005 20140929140202.5
008 150210s2013 ||||||||||||||||| ||eng d
020 $a 9781303614583
035 $a (MiAaPQ)AAI1549325
035 $a AAI1549325
040 $a MiAaPQ $c MiAaPQ
100 1 $a Catalfano, Mark. $3 2099543
245 1 0 $a Electron roles in extreme ultraviolet lithography mirror contamination and flashover.
300 $a 89 p.
500 $a Source: Masters Abstracts International, Volume: 52-04.
500 $a Adviser: Ahmed Hassanein.
502 $a Thesis (M.S.)--Purdue University, 2013.
520 $a The purpose of this study was to characterize and study the contamination behavior of residual hydrocarbons and water vapor in a vacuum environment similar to that suited to the performance of EUV Lithography devices. A 50nm ruthenium film deposited on a silicon surface which served to simulate the Ru coated mirrors in a typical lithography setup was bombarded with 13.5 nm wavelength light at a grazing angle. We then studied in real-time the contamination effect by using extreme ultraviolet photoelectron spectroscopy (EUPS). This allowed us to examine the behavior of the contaminants as they formed dipoles. By monitoring X-Ray Photoelectron Spectroscopy (XPS) as a function of angle, we determined that carbon species may be more prevalent in the normal directions, while water and related species tend to be at grazing angles. While characterizing the contamination is certainly important for finding ways of mitigating it, we also attempted to prove that the electrons from a typical EUV source are just as important in terms of causing contamination if not more so than the light itself. By monitoring the contamination with both AES and XPS together, we were able to prove that in the absence of electrons the carbon buildup was far reduced. Similar results were found while studying the grazing angle reflectivity of the ruthenium sample. Electrons also proved to be important in surface flashover, a phenomenon in which the polarity on the surface can suddenly switch from negative to positive over a course of seconds. We saw this effect on gold and examined it in real-time with the help of secondary electron spectroscopy (SES). The flashover effect seemed to be defect driven. Interestingly, there was a dependence on energy change: when changing electrons from a lower to higher energy a flashover was observed, but not while changing from a high to a low energy. While we observed this on gold, silicon, and carbon it could certainly be extended to occurring on the photoresist of a typical EUV lithography setup.
590 $a School code: 0183.
650 4 $a Engineering, Nuclear. $3 1043651
650 4 $a Engineering, Computer. $3 1669061
690 $a 0552
690 $a 0464
710 2 $a Purdue University. $b Nuclear Engineering. $3 1282431
773 0 $t Masters Abstracts International $g 52-04(E).
790 $a 0183
791 $a M.S.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1549325