東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Numerical modeling of a lead melting...

Coulson, Ryan.

FindBook

Google Book

Amazon

博客來

Numerical modeling of a lead melting front under the influence of natural convection.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Numerical modeling of a lead melting front under the influence of natural convection./
作者:	Coulson, Ryan.
面頁冊數:	94 p.
附註:	Source: Masters Abstracts International, Volume: 52-02.
Contained By:	Masters Abstracts International52-02(E).
標題:	Engineering, Nuclear. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1545125
ISBN:	9781303379574

Numerical modeling of a lead melting front under the influence of natural convection.
Coulson, Ryan.

Numerical modeling of a lead melting front under the influence of natural convection. - 94 p.

Source: Masters Abstracts International, Volume: 52-02.

Thesis (M.S.)--Colorado School of Mines, 2013.

This work presents a study of the Effective Heat Capacity (EHC) method applied to the numerical simulation of the interface between a solid and a naturally convecting pool of liquid lead under pseudo-steady-state and transient conditions using COMSOL Multiphysics. The EHC method is implemented as a temperature dependent pseudo-material with discontinuities in the heat capacity, dynamic viscosity, and thermal conductivity to simulate the melting front. The approach is validated with experimental data for a vertical melting front between two walls. The hot wall heat flux and the cold wall temperature are adjusted until the numerical model that best matches the experimental data is found. The best case boundary conditions then serve as the control in subsequent studies of key modeling parameters, including the mesh refinement, the discontinuity width and location, the maximum allowable time step, and the jump in dynamic viscosity. An extra fine mesh with a maximum element size of 1.24 * 10--3 m2 results in the most accurate model. For pseudo-steady-state models the width and location of the discontinuity does not affect the results substantially but it does affect the settling times and transient behavior of the models. The maximum allowable time step is dependent on the mesh resolution. The behavior of the pseudo-solid transitions from solid to liquid when the dynamic viscosity is less then 1.0 * 104 Pa · s.

ISBN: 9781303379574Subjects--Topical Terms:

1043651
Engineering, Nuclear.

Numerical modeling of a lead melting front under the influence of natural convection.
LDR:02290nam a2200277 4500 001 1963312
005 20140929140200.5
008 150210s2013 ||||||||||||||||| ||eng d
020 $a 9781303379574
035 $a (MiAaPQ)AAI1545125
035 $a AAI1545125
040 $a MiAaPQ $c MiAaPQ
100 1 $a Coulson, Ryan. $3 2099534
245 1 0 $a Numerical modeling of a lead melting front under the influence of natural convection.
300 $a 94 p.
500 $a Source: Masters Abstracts International, Volume: 52-02.
500 $a Adviser: Jeffrey C. King.
502 $a Thesis (M.S.)--Colorado School of Mines, 2013.
520 $a This work presents a study of the Effective Heat Capacity (EHC) method applied to the numerical simulation of the interface between a solid and a naturally convecting pool of liquid lead under pseudo-steady-state and transient conditions using COMSOL Multiphysics. The EHC method is implemented as a temperature dependent pseudo-material with discontinuities in the heat capacity, dynamic viscosity, and thermal conductivity to simulate the melting front. The approach is validated with experimental data for a vertical melting front between two walls. The hot wall heat flux and the cold wall temperature are adjusted until the numerical model that best matches the experimental data is found. The best case boundary conditions then serve as the control in subsequent studies of key modeling parameters, including the mesh refinement, the discontinuity width and location, the maximum allowable time step, and the jump in dynamic viscosity. An extra fine mesh with a maximum element size of 1.24 * 10--3 m2 results in the most accurate model. For pseudo-steady-state models the width and location of the discontinuity does not affect the results substantially but it does affect the settling times and transient behavior of the models. The maximum allowable time step is dependent on the mesh resolution. The behavior of the pseudo-solid transitions from solid to liquid when the dynamic viscosity is less then 1.0 * 104 Pa · s.
590 $a School code: 0052.
650 4 $a Engineering, Nuclear. $3 1043651
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0552
690 $a 0794
710 2 $a Colorado School of Mines. $b Metallurgical and Materials Engineering. $3 2093645
773 0 $t Masters Abstracts International $g 52-02(E).
790 $a 0052
791 $a M.S.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1545125