東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Rolling contact fatigue of low hardn...

Knuth, Jason A.

FindBook

Google Book

Amazon

博客來

Rolling contact fatigue of low hardness steel for slewing ring application.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Rolling contact fatigue of low hardness steel for slewing ring application./
作者:	Knuth, Jason A.
面頁冊數:	140 p.
附註:	Source: Masters Abstracts International, Volume: 52-01.
Contained By:	Masters Abstracts International52-01(E).
標題:	Engineering, General. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1540446
ISBN:	9781303186103

Rolling contact fatigue of low hardness steel for slewing ring application.
Knuth, Jason A.

Rolling contact fatigue of low hardness steel for slewing ring application. - 140 p.

Source: Masters Abstracts International, Volume: 52-01.

Thesis (M.S.)--The University of Wisconsin - Milwaukee, 2013.

This thesis discusses the rolling contact fatigue of steel utilized in anti-friction bearings, also referred to as slewing bearings. These slewing bearings are utilized in cranes, excavators, wind turbines and other similar applications. Five materials composed of two different material types were tested. The two material types were high carbon steel and medium carbon alloy steel. The test specimens were processed from forged rolled rings. Two machines were evaluated a ZF-RCF and 3-Ball test machine. The evaluation was to determine which machine can best simulate the application in which the slewing bearing is utilized.

ISBN: 9781303186103Subjects--Topical Terms:

1020744
Engineering, General.

Rolling contact fatigue of low hardness steel for slewing ring application.
LDR:03042nam a2200301 4500 001 1958866
005 20140512081841.5
008 150210s2013 ||||||||||||||||| ||eng d
020 $a 9781303186103
035 $a (MiAaPQ)AAI1540446
035 $a AAI1540446
040 $a MiAaPQ $c MiAaPQ
100 1 $a Knuth, Jason A. $3 2094092
245 1 0 $a Rolling contact fatigue of low hardness steel for slewing ring application.
300 $a 140 p.
500 $a Source: Masters Abstracts International, Volume: 52-01.
500 $a Adviser: Anoop K. Dhingra.
502 $a Thesis (M.S.)--The University of Wisconsin - Milwaukee, 2013.
520 $a This thesis discusses the rolling contact fatigue of steel utilized in anti-friction bearings, also referred to as slewing bearings. These slewing bearings are utilized in cranes, excavators, wind turbines and other similar applications. Five materials composed of two different material types were tested. The two material types were high carbon steel and medium carbon alloy steel. The test specimens were processed from forged rolled rings. Two machines were evaluated a ZF-RCF and 3-Ball test machine. The evaluation was to determine which machine can best simulate the application in which the slewing bearing is utilized.
520 $a Initially, each specimen will be pretested to determine the appropriate testing direction from within the forged rolled rings. Pretesting is needed in order to establish consistent failure modes between samples. The primary goal of the test is to understand the life differences and failure modes between high carbon steel and medium carbon alloy steel. The high carbon steel ring was cut into two sections, one of which was stress relieved and the other was quenched and tempered. The medium carbon alloy steel was cut into three sections, all of which were quenched and tempered to different hardness levels. The test program was dynamically adjusted based upon the previous sample's life and load. An S-N curve was then established from the 5 materials tested at two target loads. The samples were run until the first sign of a crack was detected by an eddy current.
520 $a At the completion of the rolling contact test, select sample's microstructure was evaluated for crack initiation location. The selected samples were divided into four groups which represent different maximum shear stress levels. These samples displayed indications of material deformation in which the high carbon steel experienced an increased amount of cold work when compared to medium carbon alloy steel. The life of the high carbon steel was nearly equivalent to the expected life of the medium carbon alloy. The work hardening of the high carbon steel increased the surface hardness that exceeded the medium carbon alloy steel surface hardness.
590 $a School code: 0263.
650 4 $a Engineering, General. $3 1020744
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0537
690 $a 0794
710 2 $a The University of Wisconsin - Milwaukee. $b Engineering. $3 2094093
773 0 $t Masters Abstracts International $g 52-01(E).
790 $a 0263
791 $a M.S.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1540446