東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Fabrication and characterization of ...

Babiniec, Sean M.

FindBook

Google Book

Amazon

博客來

Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes.

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes./
作者:	Babiniec, Sean M.
面頁冊數:	136 p.
附註:	Source: Dissertation Abstracts International, Volume: 75-05(E), Section: B.
Contained By:	Dissertation Abstracts International75-05B(E).
標題:	Alternative Energy. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3609472
ISBN:	9781303683275

Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes.
Babiniec, Sean M.

Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes. - 136 p.

Source: Dissertation Abstracts International, Volume: 75-05(E), Section: B.

Thesis (Ph.D.)--Colorado School of Mines, 2014.

High-temperature protonic ceramics (HTPCs) have gained interest as fuel cell and electrolysis cell electrolytes, as well as hydrogen separation membranes. The transport of hydrogen as opposed to oxygen results in several benefits and applications, including higher fuel efficiency, dehydrogenation of fuel streams, and hydrogen-based chemical synthesis. However, limited work has been done in the development of air/steam electrodes for these devices.

ISBN: 9781303683275Subjects--Topical Terms:

1035473
Alternative Energy.

Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes.
LDR:03401nam a2200313 4500 001 1958809
005 20140426114425.5
008 150210s2014 ||||||||||||||||| ||eng d
020 $a 9781303683275
035 $a (MiAaPQ)AAI3609472
035 $a AAI3609472
040 $a MiAaPQ $c MiAaPQ
100 1 $a Babiniec, Sean M. $3 2094016
245 1 0 $a Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes.
300 $a 136 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-05(E), Section: B.
500 $a Adviser: Neal P. Sullivan.
502 $a Thesis (Ph.D.)--Colorado School of Mines, 2014.
520 $a High-temperature protonic ceramics (HTPCs) have gained interest as fuel cell and electrolysis cell electrolytes, as well as hydrogen separation membranes. The transport of hydrogen as opposed to oxygen results in several benefits and applications, including higher fuel efficiency, dehydrogenation of fuel streams, and hydrogen-based chemical synthesis. However, limited work has been done in the development of air/steam electrodes for these devices.
520 $a This work presents the characterization of lanthanum nickelate, La 2NiO4+delta (LN), as a potential air/steam electrode material for use with BaCe0.2Zr0.7Y0.1O3-delta (BCZY27) HTPC electrolytes fabricated by the solid-state reactive sintering technique.
520 $a Two types of devices were made; a symmetric cell used for electrode characterization, and a full fuel cell/electrolysis cell used for device performance characterization. The symmetric cell consists of a 1 mm thick BCZY27 substrate with identical air/steam electrodes on both sides. Air/steam electrodes were made by infiltrating &sim; 50 nm lanthanum nickelate nanoparticles into a BCZY27 porous backbone. The fuel cell/electrolysis cell consists of a 1mm thick Ni/BCZY27 anode support, a 25 mum thick BCZY27 electrolyte, and a 50 mum thick porous BCZY27 backbone infiltrated with lanthanum nickelate. Through symmetric cell testing, it was found that the electrode polarization resistance decreases with increasing oxygen content, indicating good oxygen reduction reaction characteristics. A minimum polarization resistance was found as 2.58 Ohm-cm2 in 3% humidied oxygen at 700 °C. Full cell testing revealed a peak power density of 27 mW-cm-2 at 700 °C.
520 $a Hydrogen flux measurements were also taken in the both galvanic/post-galvanic and electrolytic operation. Galvanic/post-galvanic fluxes exhibit a very high faradaic efficiency. However, electrolytic hydrogen fluxes were much lower than the calculated hydrogen faradaic flux, indicating a different charge carrier other than protons is dominating the conductivity of the BCZY27 electrolyte under electrolysis operation. In this work, it is proposed that high electrolytic overpotentials combined with oxygen incorporation into the electrolyte result in electron hole generation and migration through the electrolyte, creating an apparent electronic short. This result suggests the inadequacy of thin BCZY27 membranes in electrolytic devices.
590 $a School code: 0052.
650 4 $a Alternative Energy. $3 1035473
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0363
690 $a 0794
710 2 $a Colorado School of Mines. $b Mechanical Engineering. $3 2092097
773 0 $t Dissertation Abstracts International $g 75-05B(E).
790 $a 0052
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3609472