東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Network convergence = Ethernet appli...

Joseph, Vinod.

Linked to FindBook

Google Book

Amazon

博客來

Network convergence = Ethernet applications and next generation packet transport architectures /

Record Type:	Electronic resources : Monograph/item
Title/Author:	Network convergence/ Vinod Joseph and Srinivas Mulugu.
Reminder of title:	Ethernet applications and next generation packet transport architectures /
Author:	Joseph, Vinod.
other author:	Mulugu, Srinivas.
Published:	Boston :Morgan Kaufmann, : c2014.,
Description:	ix, 585 p. :ill. ;24 cm.
Subject:	Ethernet (Local area network system) -
Online resource:	http://www.sciencedirect.com/science/book/9780123978776
ISBN:	9780123978776 (electronic bk.)

Network convergence = Ethernet applications and next generation packet transport architectures /
Joseph, Vinod.

Network convergenceEthernet applications and next generation packet transport architectures /[electronic resource] :Vinod Joseph and Srinivas Mulugu. - Boston :Morgan Kaufmann,c2014. - ix, 585 p. :ill. ;24 cm.

Includes bibliographical references and index.

"Before we get into VPLS, let us take a quick look at MPLS Layer 2 VPNs also referred to as Point-Point services. A point-to-point L2VPN circuit, as defined by the PWE3 working group, is a provider service that offers a point-to-point service infrastructure over an IP/MPLS packet switched network. The PWE3 working group of the IETF describes mechanisms on how to deliver L2 VPN services across a packet switches IP/MPLS network. The basic reference model is outlined in the picture below. A pseudo-wire (PW) is a connection between two provider edge (PE) devices, which connects two attachment circuits (ACs). An AC can be a Frame Relay DLCI, an ATM VPI/VCI, an Ethernet port, a VLAN, a HDLC, a PPP connection on a physical interface, a PPP session from an L2TP tunnel, an MPLS LSP, etc. During the setup of a PW, the two PE routers will be configured or will automatically exchange information about the service to be emulated so that later they know how to process packets coming from the other end. The PE routers use Targeted LDP sessions for setting the PW. After a PW is set up between two PE routers, frames received by one PE from an AC are encapsulated and sent over the PW to the remote PE, where native frames are re-constructed and forwarded to the other CE"--

ISBN: 9780123978776 (electronic bk.)

LCCN: 2013025197Subjects--Topical Terms:

703029
Ethernet (Local area network system)

LC Class. No.: TK5105.383 / .J68 2014

Dewey Class. No.: 004.6

Network convergence = Ethernet applications and next generation packet transport architectures /
LDR:02076cmm a2200229 a 4500 001 1952166
005 20140701154441.0
008 150102s2014 maua sb 001 0 eng
010 $a 2013025197
020 $a 9780123978776 (electronic bk.)
020 $a 9780123978776
035 $a 14000354
040 $a DLC $c DLC $d DLC
041 0 $a eng
042 $a pcc
050 0 0 $a TK5105.383 $b .J68 2014
082 0 0 $a 004.6 $2 23
100 1 $a Joseph, Vinod. $3 1068197
245 1 0 $a Network convergence $h [electronic resource] : $b Ethernet applications and next generation packet transport architectures / $c Vinod Joseph and Srinivas Mulugu.
260 $a Boston : $b Morgan Kaufmann, $c c2014.
300 $a ix, 585 p. : $b ill. ; $c 24 cm.
504 $a Includes bibliographical references and index.
520 $a "Before we get into VPLS, let us take a quick look at MPLS Layer 2 VPNs also referred to as Point-Point services. A point-to-point L2VPN circuit, as defined by the PWE3 working group, is a provider service that offers a point-to-point service infrastructure over an IP/MPLS packet switched network. The PWE3 working group of the IETF describes mechanisms on how to deliver L2 VPN services across a packet switches IP/MPLS network. The basic reference model is outlined in the picture below. A pseudo-wire (PW) is a connection between two provider edge (PE) devices, which connects two attachment circuits (ACs). An AC can be a Frame Relay DLCI, an ATM VPI/VCI, an Ethernet port, a VLAN, a HDLC, a PPP connection on a physical interface, a PPP session from an L2TP tunnel, an MPLS LSP, etc. During the setup of a PW, the two PE routers will be configured or will automatically exchange information about the service to be emulated so that later they know how to process packets coming from the other end. The PE routers use Targeted LDP sessions for setting the PW. After a PW is set up between two PE routers, frames received by one PE from an AC are encapsulated and sent over the PW to the remote PE, where native frames are re-constructed and forwarded to the other CE"-- $c Provided by publisher.
650 0 $a Ethernet (Local area network system) $3 703029
650 0 $a Packet transport networks. $3 2045972
650 0 $a Computer network architectures. $3 572483
650 0 $a Convergence (Telecommunication) $3 590620
650 0 $a Internetworking (Telecommunication) $3 677805
700 1 $a Mulugu, Srinivas. $3 1637206
856 4 0 $u http://www.sciencedirect.com/science/book/9780123978776