東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Electronic environments and electroc...

Graetz, Jason Allan.

FindBook

Google Book

Amazon

博客來

Electronic environments and electrochemical properties in lithium storage materials.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Electronic environments and electrochemical properties in lithium storage materials./
作者:	Graetz, Jason Allan.
面頁冊數:	118 p.
附註:	Source: Dissertation Abstracts International, Volume: 64-05, Section: B, page: 2344.
Contained By:	Dissertation Abstracts International64-05B.
標題:	Engineering, Materials Science. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3091461

Electronic environments and electrochemical properties in lithium storage materials.
Graetz, Jason Allan.

Electronic environments and electrochemical properties in lithium storage materials. - 118 p.

Source: Dissertation Abstracts International, Volume: 64-05, Section: B, page: 2344.

Thesis (Ph.D.)--California Institute of Technology, 2003.

One of the large controversies regarding lithium cathodes concerns the arrangement of the local electronic environments in the host material and how these environments are affected by lithium intercalation. Electron energy-loss spectrometry was used to study charge compensation in lithiated transition-metal oxides (e.g., LiCoO2 and LiNi0.8Co0.2O 2) during electrochemical cycling. The oxygen K-edge and transition metal L2,3 white lines were used to probe the oxygen 2p and transition metal 3d states, respectively. These results show a large increase in state occupancy of the oxygen 2p band during lithiation, suggesting that much of the lithium 2s electron is accommodated by the anion. Ab initio calculations of the oxygen 2p partial density of states curves confirm the increase in unoccupied states that accompany lithium extraction. In contrast with the large changes observed in the oxygen K-edge, much smaller changes were observed in the transition metal L2,3 white lines. Surprisingly, for layered LiCoO 2 and Li(Ni, Co)O2, the transition metal valence changes little during the charge compensation accompanying lithiation.Subjects--Topical Terms:

1017759
Engineering, Materials Science.

Electronic environments and electrochemical properties in lithium storage materials.
LDR:03277nmm 2200289 4500 001 1866065
005 20041220114119.5
008 130614s2003 eng d
035 $a (UnM)AAI3091461
035 $a AAI3091461
040 $a UnM $c UnM
100 1 $a Graetz, Jason Allan. $3 1953481
245 1 0 $a Electronic environments and electrochemical properties in lithium storage materials.
300 $a 118 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-05, Section: B, page: 2344.
500 $a Adviser: Brent Fultz.
502 $a Thesis (Ph.D.)--California Institute of Technology, 2003.
520 $a One of the large controversies regarding lithium cathodes concerns the arrangement of the local electronic environments in the host material and how these environments are affected by lithium intercalation. Electron energy-loss spectrometry was used to study charge compensation in lithiated transition-metal oxides (e.g., LiCoO2 and LiNi0.8Co0.2O 2) during electrochemical cycling. The oxygen K-edge and transition metal L2,3 white lines were used to probe the oxygen 2p and transition metal 3d states, respectively. These results show a large increase in state occupancy of the oxygen 2p band during lithiation, suggesting that much of the lithium 2s electron is accommodated by the anion. Ab initio calculations of the oxygen 2p partial density of states curves confirm the increase in unoccupied states that accompany lithium extraction. In contrast with the large changes observed in the oxygen K-edge, much smaller changes were observed in the transition metal L2,3 white lines. Surprisingly, for layered LiCoO 2 and Li(Ni, Co)O2, the transition metal valence changes little during the charge compensation accompanying lithiation.
520 $a Recent demand for alternatives to graphitic carbon for lithium anodes motivated an investigation into novel binary lithium alloys. The large volume expansions associated with lithium insertion is known to generate tremendous microstructural damage, making most alloys unsuitable for rechargeable lithium batteries. Electrodes of nanostructured lithium alloys were prepared in an attempt to mitigate the particle decrepitation that occurs during cycling and to shorten diffusion times for lithium. Anodes of silicon and germanium were prepared in thin film form as nanocrystalline particles (10 nm mean diameter) and as continuous amorphous thin films (60--250 nm thick). These nanostructured materials exhibited stable capacities up to six times larger than what is found in graphitic carbons, which are currently the industry standard. In addition, these electrodes do not suffer from particle decrepitation and therefore exhibit excellent cycle life. The reversibility of these electrodes is attributed to the nanoscale dimensions, which circumvent conventional mechanisms of mechanical deterioration. Nanostructured Li-Si and Li-Ge exhibit the highest reversible electrochemical capacities yet reported for an alloy electrode.
590 $a School code: 0037.
650 4 $a Engineering, Materials Science. $3 1017759
650 4 $a Energy. $3 876794
650 4 $a Physics, Electricity and Magnetism. $3 1019535
690 $a 0794
690 $a 0791
690 $a 0607
710 2 0 $a California Institute of Technology. $3 726902
773 0 $t Dissertation Abstracts International $g 64-05B.
790 1 0 $a Fultz, Brent, $e advisor
790 $a 0037
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3091461