東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Structure and properties of three-di...

Salem, Elsaid Hassan.

FindBook

Google Book

Amazon

博客來

Structure and properties of three-dimensional woven and woven/braided composites.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Structure and properties of three-dimensional woven and woven/braided composites./
作者:	Salem, Elsaid Hassan.
面頁冊數:	137 p.
附註:	Source: Dissertation Abstracts International, Volume: 62-06, Section: B, page: 2945.
Contained By:	Dissertation Abstracts International62-06B.
標題:	Textile Technology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3016301
ISBN:	0493268650

Structure and properties of three-dimensional woven and woven/braided composites.
Salem, Elsaid Hassan.

Structure and properties of three-dimensional woven and woven/braided composites. - 137 p.

Source: Dissertation Abstracts International, Volume: 62-06, Section: B, page: 2945.

Thesis (Ph.D.)--North Carolina State University, 2001.

The objective of this work was to study the bending and shear behavior of 3-D woven and woven/braided composites, and to explore means of improving them. A second-generation 3-D weaving machine was constructed at the College of Textile, North Carolina State University to produce the 3-D woven preforms. A layer of 2-dimensional braid with different braid angles and different braid yarn sizes had been added, using a conventional braiding machine, to the surface of some of the 3-D woven preforms to form woven/braided (combined) preforms.

ISBN: 0493268650Subjects--Topical Terms:

1020710
Textile Technology.

Structure and properties of three-dimensional woven and woven/braided composites.
LDR:03160nmm 2200325 4500 001 1864825
005 20041216133438.5
008 130614s2001 eng d
020 $a 0493268650
035 $a (UnM)AAI3016301
035 $a AAI3016301
040 $a UnM $c UnM
100 1 $a Salem, Elsaid Hassan. $3 1952293
245 1 0 $a Structure and properties of three-dimensional woven and woven/braided composites.
300 $a 137 p.
500 $a Source: Dissertation Abstracts International, Volume: 62-06, Section: B, page: 2945.
500 $a Director: Mansour M. Mohamed.
502 $a Thesis (Ph.D.)--North Carolina State University, 2001.
520 $a The objective of this work was to study the bending and shear behavior of 3-D woven and woven/braided composites, and to explore means of improving them. A second-generation 3-D weaving machine was constructed at the College of Textile, North Carolina State University to produce the 3-D woven preforms. A layer of 2-dimensional braid with different braid angles and different braid yarn sizes had been added, using a conventional braiding machine, to the surface of some of the 3-D woven preforms to form woven/braided (combined) preforms.
520 $a All woven and combined preforms were consolidated into composites. Some 3-D woven and combined preforms were preheated and some were kept at room temperature before consolidation. During consolidation, two levels of consolidation pressures had been applied to study the effect of the consolidation pressure. Composite samples of the two structures have been tested for bending strength and modulus, interlaminar shear strength, and in plane shear strength and modulus.
520 $a All bending and shear properties increased for the 3-D woven and combined composites with increasing consolidation pressure and reasonably preheating the preforms to a certain degree. It is possible to increase bending and shear (transverse and in-plane) properties of 3-D orthogonal woven composites by adding a uniformly covered and thin layer of 2-D braid to the surface of the 3-D preform before consolidation. The highest in-plane shear properties for combined composites occurred at 45 degrees angle or close to that angle providing good braid layer for all braid tow sizes. More work is needed to optimize the braid angles, the braid tow size and the treatment conditions.
520 $a Statistical analysis and modeling have been conducted to study the resulting experimental values and determine quantitatively the effect of each factor affecting the mechanical and physical properties of the composites. Results showed great affiliation between mechanical properties and the treatment conditions.
520 $a Finite Element model was developed to predict the in-plane shear properties of the woven and combined composites. Results showed good agreement between the theoretical and actual values.
590 $a School code: 0155.
650 4 $a Textile Technology. $3 1020710
650 4 $a Plastics Technology. $3 1023683
690 $a 0994
690 $a 0795
710 2 0 $a North Carolina State University. $3 1018772
773 0 $t Dissertation Abstracts International $g 62-06B.
790 1 0 $a Mohamed, Mansour M., $e advisor
790 $a 0155
791 $a Ph.D.
792 $a 2001
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3016301