語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Supercritical processing of electric...
~
Kurosawa, Shutaro.
FindBook
Google Book
Amazon
博客來
Supercritical processing of electrically conducting polymers.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Supercritical processing of electrically conducting polymers./
作者:
Kurosawa, Shutaro.
面頁冊數:
250 p.
附註:
Source: Dissertation Abstracts International, Volume: 65-07, Section: B, page: 3579.
Contained By:
Dissertation Abstracts International65-07B.
標題:
Engineering, Chemical. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3140742
ISBN:
0496878824
Supercritical processing of electrically conducting polymers.
Kurosawa, Shutaro.
Supercritical processing of electrically conducting polymers.
- 250 p.
Source: Dissertation Abstracts International, Volume: 65-07, Section: B, page: 3579.
Thesis (Ph.D.)--Georgia Institute of Technology, 2004.
Thick composites (∼3 mm in thickness) of polypyrrole with electrically insulating porous (polystyrene) and nonporous (polymethyl methacrylate) substrates were prepared using a two-step batch method. In the two-step method, impregnation of volatile (iodine) or nonvolatile (ferric chloride) oxidant in the substrate is followed by in-situ polymerization of pyrrole. Conductivities as high as 10-1 S/cm were obtained in this work in the case of composites of polypyrrole and porous, crosslinked polystyrene. Use of the nonvolatile oxidant (ferric chloride) resulted in higher conducting polymer yield, as well as composites having a higher conductivity, thermal stability, and mechanical strength. However, the volatile oxidant (iodine) could be transported to the substrate using supercritical carbon dioxide as the solvent. As a result, partitioning of the oxidant between the solvent phase and the polymer substrate, and hence the distribution of the oxidant in the substrate, could be controlled by manipulation of the pressure. The two-step batch method in which supercritical carbon dioxide is used to facilitate transport and as a solvent for the oxidant was found to be an effective method for the production of thick composites with uniform conductivity, thermal stability, and mechanical strength. Such composites are desired in important practical applications such as rechargeable battery electrodes and electromagnetic interference shielding materials.
ISBN: 0496878824Subjects--Topical Terms:
1018531
Engineering, Chemical.
Supercritical processing of electrically conducting polymers.
LDR
:02362nmm 2200289 4500
001
1849710
005
20051207081943.5
008
130614s2004 eng d
020
$a
0496878824
035
$a
(UnM)AAI3140742
035
$a
AAI3140742
040
$a
UnM
$c
UnM
100
1
$a
Kurosawa, Shutaro.
$3
1937651
245
1 0
$a
Supercritical processing of electrically conducting polymers.
300
$a
250 p.
500
$a
Source: Dissertation Abstracts International, Volume: 65-07, Section: B, page: 3579.
500
$a
Director: Amyn S. Teja.
502
$a
Thesis (Ph.D.)--Georgia Institute of Technology, 2004.
520
$a
Thick composites (∼3 mm in thickness) of polypyrrole with electrically insulating porous (polystyrene) and nonporous (polymethyl methacrylate) substrates were prepared using a two-step batch method. In the two-step method, impregnation of volatile (iodine) or nonvolatile (ferric chloride) oxidant in the substrate is followed by in-situ polymerization of pyrrole. Conductivities as high as 10-1 S/cm were obtained in this work in the case of composites of polypyrrole and porous, crosslinked polystyrene. Use of the nonvolatile oxidant (ferric chloride) resulted in higher conducting polymer yield, as well as composites having a higher conductivity, thermal stability, and mechanical strength. However, the volatile oxidant (iodine) could be transported to the substrate using supercritical carbon dioxide as the solvent. As a result, partitioning of the oxidant between the solvent phase and the polymer substrate, and hence the distribution of the oxidant in the substrate, could be controlled by manipulation of the pressure. The two-step batch method in which supercritical carbon dioxide is used to facilitate transport and as a solvent for the oxidant was found to be an effective method for the production of thick composites with uniform conductivity, thermal stability, and mechanical strength. Such composites are desired in important practical applications such as rechargeable battery electrodes and electromagnetic interference shielding materials.
590
$a
School code: 0078.
650
4
$a
Engineering, Chemical.
$3
1018531
650
4
$a
Chemistry, Polymer.
$3
1018428
650
4
$a
Engineering, Electronics and Electrical.
$3
626636
690
$a
0542
690
$a
0495
690
$a
0544
710
2 0
$a
Georgia Institute of Technology.
$3
696730
773
0
$t
Dissertation Abstracts International
$g
65-07B.
790
1 0
$a
Teja, Amyn S.,
$e
advisor
790
$a
0078
791
$a
Ph.D.
792
$a
2004
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3140742
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9199224
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入