東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Wood laminated composite poles.

Piao, Cheng.

FindBook

Google Book

Amazon

博客來

Wood laminated composite poles.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Wood laminated composite poles./
作者:	Piao, Cheng.
面頁冊數:	108 p.
附註:	Source: Dissertation Abstracts International, Volume: 65-06, Section: B, page: 2714.
Contained By:	Dissertation Abstracts International65-06B.
標題:	Agriculture, Forestry and Wildlife. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3135602
ISBN:	0496828258

Wood laminated composite poles.
Piao, Cheng.

Wood laminated composite poles. - 108 p.

Source: Dissertation Abstracts International, Volume: 65-06, Section: B, page: 2714.

Thesis (Ph.D.)--Louisiana State University and Agricultural & Mechanical College, 2003.

Wood composite poles are new engineered products with polygonal shapes and bonded with synthetic resins. The poles have multiple advantages over the solid wood poles and are a promising solid pole substitute in power transmission, telecommunication, and cable TV services. The use of composite poles may reduce the cost both in materials and manipulation, and facilitate installation and treatment. It is necessary to evaluate the factors that affect their properties and construct theoretical and analytical models to predict these properties.

ISBN: 0496828258Subjects--Topical Terms:

783690
Agriculture, Forestry and Wildlife.

Wood laminated composite poles.
LDR:03146nmm 2200301 4500 001 1845663
005 20051101072043.5
008 130614s2003 eng d
020 $a 0496828258
035 $a (UnM)AAI3135602
035 $a AAI3135602
040 $a UnM $c UnM
100 1 $a Piao, Cheng. $3 1933812
245 1 0 $a Wood laminated composite poles.
300 $a 108 p.
500 $a Source: Dissertation Abstracts International, Volume: 65-06, Section: B, page: 2714.
500 $a Director: Todd F. Shupe.
502 $a Thesis (Ph.D.)--Louisiana State University and Agricultural & Mechanical College, 2003.
520 $a Wood composite poles are new engineered products with polygonal shapes and bonded with synthetic resins. The poles have multiple advantages over the solid wood poles and are a promising solid pole substitute in power transmission, telecommunication, and cable TV services. The use of composite poles may reduce the cost both in materials and manipulation, and facilitate installation and treatment. It is necessary to evaluate the factors that affect their properties and construct theoretical and analytical models to predict these properties.
520 $a Experiments were conducted to investigate strip thickness and strip number effects on the flexural properties and shear stress of wood composite poles. Small-size (diameter = 7.6 cm (3 in), length = 1.16 m (46 in)) and full size poles (diameter = 10.2 cm (4 in), length = 6 m (20 ft)) were manufactured for this purpose. Four strip thickness levels and three strip number levels for the small-size poles, and three thickness levels and two strip number levels for full-size poles were chosen as experimental variables. The lumber was cut into strips, which were bonded with resin in molds, and the resulting poles were evaluated in a cantilever test. Results show that the effects of strip thickness were negative on glue-line shear and positive on the shear at poles' clamped ends. But thickness had little effects on maximum bending stress of the small-size poles and Young's modulus of both full- and small-size poles. With the increase of number of strips, Young's modulus of poles was increased. Number of strips had little effects on the maximum bending stress and glue-line shear of small-size poles.
520 $a A theoretical analysis was carried out to study the deflection and stress of composite poles. Governing differential equations were derived from high-order differential equations based on the principle of minimum potential energy theorem. Transverse shear and body force were included in the model. Investigations were also carried out to find glue-line effects on the stress and deflection analyses of composite poles. The analytical solution is modeled with the finite element analysis using ANSYS. Both theoretical and analytical solutions were verified by the experimental data.
590 $a School code: 0107.
650 4 $a Agriculture, Forestry and Wildlife. $3 783690
650 4 $a Agriculture, Wood Technology. $3 1031154
690 $a 0478
690 $a 0746
710 2 0 $a Louisiana State University and Agricultural & Mechanical College. $3 783779
773 0 $t Dissertation Abstracts International $g 65-06B.
790 1 0 $a Shupe, Todd F., $e advisor
790 $a 0107
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3135602