東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

A study of the nature of fabric comf...

Kilinc-Balci, Fatma Selcen.

FindBook

Google Book

Amazon

博客來

A study of the nature of fabric comfort: Design-oriented fabric comfort model.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	A study of the nature of fabric comfort: Design-oriented fabric comfort model./
作者:	Kilinc-Balci, Fatma Selcen.
面頁冊數:	348 p.
附註:	Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 1013.
Contained By:	Dissertation Abstracts International65-02B.
標題:	Textile Technology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3124275
ISBN:	0496715837

A study of the nature of fabric comfort: Design-oriented fabric comfort model.
Kilinc-Balci, Fatma Selcen.

A study of the nature of fabric comfort: Design-oriented fabric comfort model. - 348 p.

Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 1013.

Thesis (Ph.D.)--Auburn University, 2004.

This study aims at taking a new approach to the analysis of fabric comfort phenomenon. This approach is based on the following definition of comfort, developed in the initial phase of this study: "The state at which the fabric/garment has a minimum mechanical interaction with the skin, and an optimum positive interaction with the environment; the environment here being the surrounding media and the localized against-skin media".

ISBN: 0496715837Subjects--Topical Terms:

1020710
Textile Technology.

A study of the nature of fabric comfort: Design-oriented fabric comfort model.
LDR:03374nmm 2200289 4500 001 1840612
005 20050802071626.5
008 130614s2004 eng d
020 $a 0496715837
035 $a (UnM)AAI3124275
035 $a AAI3124275
040 $a UnM $c UnM
100 1 $a Kilinc-Balci, Fatma Selcen. $3 1928941
245 1 2 $a A study of the nature of fabric comfort: Design-oriented fabric comfort model.
300 $a 348 p.
500 $a Source: Dissertation Abstracts International, Volume: 65-02, Section: B, page: 1013.
500 $a Director: Yehia Elmogahzy.
502 $a Thesis (Ph.D.)--Auburn University, 2004.
520 $a This study aims at taking a new approach to the analysis of fabric comfort phenomenon. This approach is based on the following definition of comfort, developed in the initial phase of this study: "The state at which the fabric/garment has a minimum mechanical interaction with the skin, and an optimum positive interaction with the environment; the environment here being the surrounding media and the localized against-skin media".
520 $a The above definition agrees with the main directions of comfort research that have been followed by researchers over the last seventy years: Neurophysiological (tactile behavior), and thermophysiological (thermal behavior). In light of the above definition, it follows that the common factor that can truly ties all the aspects associated with fabric comfort is fabric/skin interaction. The question now is how to translate this factor into a characterization index of fabric comfort and how to establish design parameters of textile fabrics that reflect this interaction. The analysis made in this study primarily aimed at addressing this fundamental question. This was accomplished through developing a structural model to explore the different factors influencing fabric comfort. The dependent variable of this model represents a unified comfort characterization index reflecting the fabric/skin interaction. This index is called the A-Ratio and is determined by the ratio between the true area of fabric/skin contact, At, and the corresponding apparent area, Aa. The general form of the structural model is as follows: AtAa=&parl0; CM&parr0;a+1a K-1a MaP1 a where P is the lateral pressure on the true area of contact in Pa (or N/m2), Ma is the number of asperities per unit apparent area, and CM is a parameter associated with the distribution of the lateral pressure on the contacting area, K is a surface hardness index, and a is a material-related parameter that depends on the nature of material deformation under pressure.
520 $a The above structural model is suitable for analysis of fabric comfort at microscopic level. At a macroscopic mode, the model has to be expanded to accommodate the various structural factors associated with different fabrics and garments. In this study, this was partially achieved through experimental analysis in which the area of contact was tested using an innovative technique, and other comfort-related parameters were also tested to develop correlations with the A-Ratio. (Abstract shortened by UMI.)
590 $a School code: 0012.
650 4 $a Textile Technology. $3 1020710
690 $a 0994
710 2 0 $a Auburn University. $3 1020457
773 0 $t Dissertation Abstracts International $g 65-02B.
790 1 0 $a Elmogahzy, Yehia, $e advisor
790 $a 0012
791 $a Ph.D.
792 $a 2004
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3124275