東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Development of a test device and pro...

Sati, Rohit.

FindBook

Google Book

Amazon

博客來

Development of a test device and procedure to measure heat transfer through fabrics when exposed to pressurized steam.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Development of a test device and procedure to measure heat transfer through fabrics when exposed to pressurized steam./
作者:	Sati, Rohit.
面頁冊數:	78 p.
附註:	Source: Masters Abstracts International, Volume: 44-05, page: 2447.
Contained By:	Masters Abstracts International44-05.
標題:	Textile Technology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR13881
ISBN:	9780494138816

Development of a test device and procedure to measure heat transfer through fabrics when exposed to pressurized steam.
Sati, Rohit.

Development of a test device and procedure to measure heat transfer through fabrics when exposed to pressurized steam. - 78 p.

Source: Masters Abstracts International, Volume: 44-05, page: 2447.

Thesis (M.Sc.)--University of Alberta (Canada), 2006.

Extensive use of pressurized steam in oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed. Several factors were considered while designing the test device to simulate the work site conditions. Fabrics were exposed to steam at two distances (50mm and 100mm) and two pressures (207 kPa and 69 kPa). Theoretical considerations included heat and mass transfer, fabric structure and relationships to performance properties of fabrics.

ISBN: 9780494138816Subjects--Topical Terms:

1020710
Textile Technology.

Development of a test device and procedure to measure heat transfer through fabrics when exposed to pressurized steam.
LDR:01814nmm 2200253 4500 001 1833130
005 20070907105147.5
008 130610s2006 eng d
020 $a 9780494138816
035 $a (UMI)AAIMR13881
035 $a AAIMR13881
040 $a UMI $c UMI
100 1 $a Sati, Rohit. $3 1921842
245 1 0 $a Development of a test device and procedure to measure heat transfer through fabrics when exposed to pressurized steam.
300 $a 78 p.
500 $a Source: Masters Abstracts International, Volume: 44-05, page: 2447.
502 $a Thesis (M.Sc.)--University of Alberta (Canada), 2006.
520 $a Extensive use of pressurized steam in oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed. Several factors were considered while designing the test device to simulate the work site conditions. Fabrics were exposed to steam at two distances (50mm and 100mm) and two pressures (207 kPa and 69 kPa). Theoretical considerations included heat and mass transfer, fabric structure and relationships to performance properties of fabrics.
520 $a The test device and procedure differentiated well among fabrics and between conditions. Maximum heat transfer was observed at 30 psi and 50mm distance in all fabrics. It was found that laminated and coated fabrics performed better than fabrics without such treatment. Hence, fabrics with high water permeability showed poor resistance to heat and moisture transfer compared to semi permeable and impermeable ones.
590 $a School code: 0351.
650 4 $a Textile Technology. $3 1020710
690 $a 0994
710 2 0 $a University of Alberta (Canada). $3 626651
773 0 $t Masters Abstracts International $g 44-05.
790 $a 0351
791 $a M.Sc.
792 $a 2006
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=MR13881