東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

The synthesis, characterization and ...

Rioux, Robert M.

FindBook

Google Book

Amazon

博客來

The synthesis, characterization and catalytic reaction studies of monodisperse platinum nanoparticles in mesoporous oxide materials.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	The synthesis, characterization and catalytic reaction studies of monodisperse platinum nanoparticles in mesoporous oxide materials./
作者:	Rioux, Robert M.
面頁冊數:	380 p.
附註:	Source: Dissertation Abstracts International, Volume: 67-08, Section: B, page: 4443.
Contained By:	Dissertation Abstracts International67-08B.
標題:	Chemistry, Inorganic. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3228474
ISBN:	9780542826405

The synthesis, characterization and catalytic reaction studies of monodisperse platinum nanoparticles in mesoporous oxide materials.
Rioux, Robert M.

The synthesis, characterization and catalytic reaction studies of monodisperse platinum nanoparticles in mesoporous oxide materials. - 380 p.

Source: Dissertation Abstracts International, Volume: 67-08, Section: B, page: 4443.

Thesis (Ph.D.)--University of California, Berkeley, 2006.

A catalyst design program was implemented in which Pt nanoparticles, either of monodisperse size and/or shape were synthesized, characterized and studied in a number of hydrocarbon conversion reactions. The novel preparation of these materials enables exquisite control over their physical and chemical properties that could be controlled (and therefore rationally tuned) during synthesis. The ability to synthesize rather than prepare catalysts followed by thorough characterization enable accurate structure-function relationships to be elucidated. Pt nanoparticles (1.7--7.1 nm) are synthesized by solution phase reduction methods in which Pt precursors are reduced in protic solvents in the presence of a surface templating polymer, which serves to stabilize the metal nanoparticles in solution. Particle size can be controlled during synthesis by altering either the PVP: Pt salt ratio, reaction media and by seeded growth methods. After Pt nanoparticles are synthesized, their size and morphology are confirmed with transmission electron microscopy and x-ray diffraction. Low power sonication in either aqueous or organic solvent was utilized to disperse Pt nanoparticles within the mesoporous metal oxide matrix. This method of catalyst synthesis is named capillary inclusion (CI). An alternative approach to catalyst synthesis combines the hydrothermal synthesis of mesoporous silica with Pt nanoparticle synthesis in the same solution. Synthesis under neutral conditions led to a catalyst in which the nanoparticles were highly dispersed throughout the catalyst matrix. This method of catalyst synthesis called nanoparticle encapsulation (NE) ensured that Pt nanoparticles were located on the internal pore surface of the mesoporous silica. Catalysts were characterized by transmission electron microscopy (TEM), x-ray diffraction (XRD), small angle x-ray scattering (SAXS) and physical adsorption to determine metal particle size and mesoporous structure. The surface chemistry of the nanoparticle surface was studied by infrared spectroscopy, selective gas adsorption (chemisorption) and catalytic reactivity studies. During nanoparticle synthesis, PVP is added to the solution to stabilize the platinum nanoparticles against aggregation. This polymer remains bound to the nanoparticle surface after catalyst synthesis and must be removed before catalytic reactions. Calcination of the catalyst at high temperature (623--723 K) for long time periods (24--36 hours) followed by reduction was initially used to clean the Pt surface. (Abstract shortened by UMI.)

ISBN: 9780542826405Subjects--Topical Terms:

517253
Chemistry, Inorganic.

The synthesis, characterization and catalytic reaction studies of monodisperse platinum nanoparticles in mesoporous oxide materials.
LDR:03551nmm 2200289 4500 001 1832091
005 20070628102708.5
008 130610s2006 eng d
020 $a 9780542826405
035 $a (UnM)AAI3228474
035 $a AAI3228474
040 $a UnM $c UnM
100 1 $a Rioux, Robert M. $3 1085317
245 1 4 $a The synthesis, characterization and catalytic reaction studies of monodisperse platinum nanoparticles in mesoporous oxide materials.
300 $a 380 p.
500 $a Source: Dissertation Abstracts International, Volume: 67-08, Section: B, page: 4443.
500 $a Adviser: Gabor A. Somorjai.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2006.
520 $a A catalyst design program was implemented in which Pt nanoparticles, either of monodisperse size and/or shape were synthesized, characterized and studied in a number of hydrocarbon conversion reactions. The novel preparation of these materials enables exquisite control over their physical and chemical properties that could be controlled (and therefore rationally tuned) during synthesis. The ability to synthesize rather than prepare catalysts followed by thorough characterization enable accurate structure-function relationships to be elucidated. Pt nanoparticles (1.7--7.1 nm) are synthesized by solution phase reduction methods in which Pt precursors are reduced in protic solvents in the presence of a surface templating polymer, which serves to stabilize the metal nanoparticles in solution. Particle size can be controlled during synthesis by altering either the PVP: Pt salt ratio, reaction media and by seeded growth methods. After Pt nanoparticles are synthesized, their size and morphology are confirmed with transmission electron microscopy and x-ray diffraction. Low power sonication in either aqueous or organic solvent was utilized to disperse Pt nanoparticles within the mesoporous metal oxide matrix. This method of catalyst synthesis is named capillary inclusion (CI). An alternative approach to catalyst synthesis combines the hydrothermal synthesis of mesoporous silica with Pt nanoparticle synthesis in the same solution. Synthesis under neutral conditions led to a catalyst in which the nanoparticles were highly dispersed throughout the catalyst matrix. This method of catalyst synthesis called nanoparticle encapsulation (NE) ensured that Pt nanoparticles were located on the internal pore surface of the mesoporous silica. Catalysts were characterized by transmission electron microscopy (TEM), x-ray diffraction (XRD), small angle x-ray scattering (SAXS) and physical adsorption to determine metal particle size and mesoporous structure. The surface chemistry of the nanoparticle surface was studied by infrared spectroscopy, selective gas adsorption (chemisorption) and catalytic reactivity studies. During nanoparticle synthesis, PVP is added to the solution to stabilize the platinum nanoparticles against aggregation. This polymer remains bound to the nanoparticle surface after catalyst synthesis and must be removed before catalytic reactions. Calcination of the catalyst at high temperature (623--723 K) for long time periods (24--36 hours) followed by reduction was initially used to clean the Pt surface. (Abstract shortened by UMI.)
590 $a School code: 0028.
650 4 $a Chemistry, Inorganic. $3 517253
650 4 $a Chemistry, Physical. $3 560527
650 4 $a Engineering, Chemical. $3 1018531
690 $a 0488
690 $a 0494
690 $a 0542
710 2 0 $a University of California, Berkeley. $3 687832
773 0 $t Dissertation Abstracts International $g 67-08B.
790 1 0 $a Somorjai, Gabor A., $e advisor
790 $a 0028
791 $a Ph.D.
792 $a 2006
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3228474