語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Stress induced delamination methods ...
~
Lee, Alan.
FindBook
Google Book
Amazon
博客來
Stress induced delamination methods for the study of platinum adhesion.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Stress induced delamination methods for the study of platinum adhesion./
作者:
Lee, Alan.
面頁冊數:
235 p.
附註:
Source: Dissertation Abstracts International, Volume: 65-11, Section: B, page: 5981.
Contained By:
Dissertation Abstracts International65-11B.
標題:
Engineering, Materials Science. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3153111
ISBN:
9780496135561
Stress induced delamination methods for the study of platinum adhesion.
Lee, Alan.
Stress induced delamination methods for the study of platinum adhesion.
- 235 p.
Source: Dissertation Abstracts International, Volume: 65-11, Section: B, page: 5981.
Thesis (Ph.D.)--Stanford University, 2005.
Adhesion of Pt films to Si substrates with a native oxide has been investigated using two novel methods of quantitative adhesion characterization. The nanoindentation induced delamination method uses an impression to store compressive strain in an overlayer film to induce delamination at the Pt/SiO2 interface. Likewise, the telephone cord delamination method involves sputtering a thick compressively stressed overlayer onto the Pt/SiO2 films to induce telephone cord delamination patterns in the film. Crack energy release rates and interface toughnesses are calculated from the dimensions of the circular blisters or the telephone cords using currently available models. Focused ion beam (FIB) observations show that the nanoindentation method is difficult to implement because of extensive crack formation in the substrate beneath the indentation, causing interface toughnesses from this test to be gross overestimates. The telephone cord measurements, by comparison, give realistic interface toughnesses, allowing us to show that decreasing the argon pressure during Pt sputtering significantly increases the adhesion of the films to the substrate. Four-point bending experiments on the same interfaces were also conducted in order to compare the results with those of the telephone cord induced delamination method. The mechanism for the increased toughnesses of the interfaces as the argon sputtering pressure during Pt deposition was lowered was investigated as well. Results from XPS analysis shows that a more chemically diffuse interface is responsible.
ISBN: 9780496135561Subjects--Topical Terms:
1017759
Engineering, Materials Science.
Stress induced delamination methods for the study of platinum adhesion.
LDR
:02423nmm 2200265 4500
001
1823366
005
20061130142426.5
008
130610s2005 eng d
020
$a
9780496135561
035
$a
(UnM)AAI3153111
035
$a
AAI3153111
040
$a
UnM
$c
UnM
100
1
$a
Lee, Alan.
$3
605088
245
1 0
$a
Stress induced delamination methods for the study of platinum adhesion.
300
$a
235 p.
500
$a
Source: Dissertation Abstracts International, Volume: 65-11, Section: B, page: 5981.
500
$a
Adviser: William D. Nix.
502
$a
Thesis (Ph.D.)--Stanford University, 2005.
520
$a
Adhesion of Pt films to Si substrates with a native oxide has been investigated using two novel methods of quantitative adhesion characterization. The nanoindentation induced delamination method uses an impression to store compressive strain in an overlayer film to induce delamination at the Pt/SiO2 interface. Likewise, the telephone cord delamination method involves sputtering a thick compressively stressed overlayer onto the Pt/SiO2 films to induce telephone cord delamination patterns in the film. Crack energy release rates and interface toughnesses are calculated from the dimensions of the circular blisters or the telephone cords using currently available models. Focused ion beam (FIB) observations show that the nanoindentation method is difficult to implement because of extensive crack formation in the substrate beneath the indentation, causing interface toughnesses from this test to be gross overestimates. The telephone cord measurements, by comparison, give realistic interface toughnesses, allowing us to show that decreasing the argon pressure during Pt sputtering significantly increases the adhesion of the films to the substrate. Four-point bending experiments on the same interfaces were also conducted in order to compare the results with those of the telephone cord induced delamination method. The mechanism for the increased toughnesses of the interfaces as the argon sputtering pressure during Pt deposition was lowered was investigated as well. Results from XPS analysis shows that a more chemically diffuse interface is responsible.
590
$a
School code: 0212.
650
4
$a
Engineering, Materials Science.
$3
1017759
690
$a
0794
710
2 0
$a
Stanford University.
$3
754827
773
0
$t
Dissertation Abstracts International
$g
65-11B.
790
1 0
$a
Nix, William D.,
$e
advisor
790
$a
0212
791
$a
Ph.D.
792
$a
2005
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3153111
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9214229
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入