東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Design of multivariable identificati...

Li, Tong.

Linked to FindBook

Google Book

Amazon

博客來

Design of multivariable identification signals for constrained systems.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Design of multivariable identification signals for constrained systems./
Author:	Li, Tong.
Description:	189 p.
Notes:	Source: Dissertation Abstracts International, Volume: 66-03, Section: B, page: 1591.
Contained By:	Dissertation Abstracts International66-03B.
Subject:	Engineering, Chemical. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3167063
ISBN:	0542025140

Design of multivariable identification signals for constrained systems.
Li, Tong.

Design of multivariable identification signals for constrained systems. - 189 p.

Source: Dissertation Abstracts International, Volume: 66-03, Section: B, page: 1591.

Thesis (Ph.D.)--Lehigh University, 2005.

System identification plays an important role in model predictive control (MPC) and other applications where mathematical models of processes are involved, and the input signal design is the first and crucial step towards a successful identification practise. This thesis is focused on developing the general methodology that can be used in designing the input signals for the identification of linear systems. The methodology tries to maximize the hypervolume of the input space so that the signal-to-noise ratio is optimized. Thus, the generated model is supposed to be more accurate than others.

ISBN: 0542025140Subjects--Topical Terms:

1018531
Engineering, Chemical.

Design of multivariable identification signals for constrained systems.
LDR:03192nmm 2200301 4500 001 1818314
005 20060908150216.5
008 130610s2005 eng d
020 $a 0542025140
035 $a (UnM)AAI3167063
035 $a AAI3167063
040 $a UnM $c UnM
100 1 $a Li, Tong. $3 1296861
245 1 0 $a Design of multivariable identification signals for constrained systems.
300 $a 189 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-03, Section: B, page: 1591.
500 $a Adviser: Christos Georgakis.
502 $a Thesis (Ph.D.)--Lehigh University, 2005.
520 $a System identification plays an important role in model predictive control (MPC) and other applications where mathematical models of processes are involved, and the input signal design is the first and crucial step towards a successful identification practise. This thesis is focused on developing the general methodology that can be used in designing the input signals for the identification of linear systems. The methodology tries to maximize the hypervolume of the input space so that the signal-to-noise ratio is optimized. Thus, the generated model is supposed to be more accurate than others.
520 $a In order to shorten identification experiment time and describe the interactions among the inputs and outputs precisely, the multi-input multi-output (MIMO) framework is adopted in the design. Because normal operation conditions and product qualities need to be ensured during experiments, constraints on both inputs and outputs are incorporated. Most of the previous design methods are based on the steady state gain matrix, whereas the actual responses of dynamic systems under perturbations are usually different from their steady state values. As a result, these steady state designs are either too conservative or cause violations to the constraints. This problem is solved in this thesis by the proposed dynamic design method. In this method, the dynamic signatures are calculated based on the system dynamics described by the a-priori system models, and used in the design. Then the amplitude matrix is optimized to achieve the maximal signal-to-noise ratio. Since a-priori dynamic models of the systems are usually not accurate, they should be updated along with the experiments, and new input signals should be designed with updated models. The key problem of this iterative design and identification process is judging the convergence of the models, which is solved in this thesis by the proposed standard of magnitude matrix norm error.
520 $a The decentralized design for the identification of high dimensional systems is also addressed in this thesis by introducing the mixed integer programming framework to model the problem. In this framework, the grouping of input variables is represented with discrete decision variables and the optimal combination can thus be found.
590 $a School code: 0105.
650 4 $a Engineering, Chemical. $3 1018531
650 4 $a Engineering, System Science. $3 1018128
690 $a 0542
690 $a 0790
710 2 0 $a Lehigh University. $3 515436
773 0 $t Dissertation Abstracts International $g 66-03B.
790 1 0 $a Georgakis, Christos, $e advisor
790 $a 0105
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3167063