東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Synthesis and characterisation of ma...

Serrano Aroca, Angel.

FindBook

Google Book

Amazon

博客來

Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating./
作者:	Serrano Aroca, Angel.
面頁冊數:	221 p.
附註:	Source: Dissertation Abstracts International, Volume: 66-05, Section: B, page: 2610.
Contained By:	Dissertation Abstracts International66-05B.
標題:	Chemistry, Polymer. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3175753
ISBN:	0542136317

Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating.
Serrano Aroca, Angel.

Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating. - 221 p.

Source: Dissertation Abstracts International, Volume: 66-05, Section: B, page: 2610.

Thesis (Dr.)--Universidad Politecnica de Valencia (Spain), 2005.

This thesis focuses on the synthesis and characterisation of a new macroporous biomatenal made of poly(methyl methacrylate) and plasma-polymerised poly(hydroxyethyl acrylate). A series of porous and non-porous PMMA networks with different degrees of porosity and cross-linker contents were synthesised by polymerisation in the presence of ethanol and bulk polymerisation. Macroporous PMMA was allowed to adsorb 2-hydroxyethyl acrylate monomer vapour. The absence of thermal or photoinitiators makes difficult the initiation of the polymerisation process of the adsorbed monomer. However, by plasma treatment this problem can be solved. This method of forming a pure hydrophilic coating by plasma polymerisation is very interesting because the porosity of the scaffold hardly changes at the end of the process.

ISBN: 0542136317Subjects--Topical Terms:

1018428
Chemistry, Polymer.

Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating.
LDR:03488nmm 2200361 4500 001 1813165
005 20060427133134.5
008 130610s2005 eng d
020 $a 0542136317
035 $a (UnM)AAI3175753
035 $a AAI3175753
040 $a UnM $c UnM
100 1 $a Serrano Aroca, Angel. $3 1902687
245 1 0 $a Synthesis and characterisation of macroporous poly(methyl methacrylate) with plasma-polymerised hydrophilic coating.
300 $a 221 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-05, Section: B, page: 2610.
500 $a Directors: Manuel Monleon Pradas; Jose Luis Gomez Ribelles.
502 $a Thesis (Dr.)--Universidad Politecnica de Valencia (Spain), 2005.
520 $a This thesis focuses on the synthesis and characterisation of a new macroporous biomatenal made of poly(methyl methacrylate) and plasma-polymerised poly(hydroxyethyl acrylate). A series of porous and non-porous PMMA networks with different degrees of porosity and cross-linker contents were synthesised by polymerisation in the presence of ethanol and bulk polymerisation. Macroporous PMMA was allowed to adsorb 2-hydroxyethyl acrylate monomer vapour. The absence of thermal or photoinitiators makes difficult the initiation of the polymerisation process of the adsorbed monomer. However, by plasma treatment this problem can be solved. This method of forming a pure hydrophilic coating by plasma polymerisation is very interesting because the porosity of the scaffold hardly changes at the end of the process.
520 $a The DMS spectrum shows that these materials are a new kind of macroporous hydrogel with a high mechanical modulus at room temperature and able to adsorb water while keeping their mechanical properties. Takayanagi's block model was applied to these results to characterise the biphasic behaviour of these systems.
520 $a Porosity measurements were performed to determine the volume fraction of pores in the samples before and after the plasma treatment. The structure and morphology of these macroporous systems were observed by Scanning Electron Microscope (SEM).
520 $a The nature, homogeneity and stability of the hydrophilic coating was studied by DSC, ATR FTIR, TGA and immersion in water. It was found that the plPHEA is very stable and only in very drastic conditions (boiling water) can suffer hydrolytic degradation.
520 $a The water sorption and diffusion properties of these biomaterials were studied by dynamic desorption, contact angle, equilibrium sorption isotherms and immersion experiments. Thermal analysis of water in the hydrophilic layer was performed by DSC.
520 $a All these experimental techniques suggested that the plasma-polymerised PHEA is more homogeneously interpenetrated with macroporous PMMA polymerised with 5 wt.% of EGDMA.
520 $a These porous systems have been designed with the aim of finding application as scaffold for cell culture in biomedical engineering but there is also a broad range of fields (dialysis, seawater desalting, etc.) in which they could be very useful as well due to their large specific area and water diffusion properties.
590 $a School code: 1378.
650 4 $a Chemistry, Polymer. $3 1018428
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0495
690 $a 0794
710 2 0 $a Universidad Politecnica de Valencia (Spain). $3 1026748
773 0 $t Dissertation Abstracts International $g 66-05B.
790 1 0 $a Monleon Pradas, Manuel, $e advisor
790 1 0 $a Gomez Ribelles, Jose Luis, $e advisor
790 $a 1378
791 $a Dr.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3175753