東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Dense carbon dioxide assisted polyme...

Ellis, Jeffrey LeClair.

FindBook

Google Book

Amazon

博客來

Dense carbon dioxide assisted polymer processing at the nanoscale .

紀錄類型:	書目-語言資料,印刷品 : Monograph/item
正題名/作者:	Dense carbon dioxide assisted polymer processing at the nanoscale ./
作者:	Ellis, Jeffrey LeClair.
面頁冊數:	324 p.
附註:	Source: Dissertation Abstracts International, Volume: 70-10, Section: B, page: 6397.
Contained By:	Dissertation Abstracts International70-10B.
標題:	Chemistry, Polymer. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3375840
ISBN:	9781109388879

Dense carbon dioxide assisted polymer processing at the nanoscale .
Ellis, Jeffrey LeClair.

Dense carbon dioxide assisted polymer processing at the nanoscale . - 324 p.

Source: Dissertation Abstracts International, Volume: 70-10, Section: B, page: 6397.

Thesis (Ph.D.)--The Ohio State University, 2009.

Nanotechnology is continually becoming more integrated into consumer products used by the general public on a daily basis. Consumers reap the benefits of enhanced properties for these commercial products, and yet they are still affordable. For biomedical products, that include nanofeatures, this is not yet a reality. The materials and methods used to fabricate these products are still far too expensive. There are many inexpensive and commercially available polymers that have potential to be used in these advanced biomedical products, but the fabrication techniques still lack the simplicity required to create an inexpensive end product.

ISBN: 9781109388879Subjects--Topical Terms:

1018428
Chemistry, Polymer.

Dense carbon dioxide assisted polymer processing at the nanoscale .
LDR:03419nam 2200313 4500 001 1391163
005 20101228074314.5
008 130515s2009 ||||||||||||||||| ||eng d
020 $a 9781109388879
035 $a (UMI)AAI3375840
035 $a AAI3375840
040 $a UMI $c UMI
100 1 $a Ellis, Jeffrey LeClair. $3 1669555
245 1 0 $a Dense carbon dioxide assisted polymer processing at the nanoscale .
300 $a 324 p.
500 $a Source: Dissertation Abstracts International, Volume: 70-10, Section: B, page: 6397.
500 $a Adviser: David L. Tomasko.
502 $a Thesis (Ph.D.)--The Ohio State University, 2009.
520 $a Nanotechnology is continually becoming more integrated into consumer products used by the general public on a daily basis. Consumers reap the benefits of enhanced properties for these commercial products, and yet they are still affordable. For biomedical products, that include nanofeatures, this is not yet a reality. The materials and methods used to fabricate these products are still far too expensive. There are many inexpensive and commercially available polymers that have potential to be used in these advanced biomedical products, but the fabrication techniques still lack the simplicity required to create an inexpensive end product.
520 $a Supercritical CO2 has been used to overcome the polymeric nanofabrication barriers for high throughput production of biomedical devices. Novel CO2 assisted low temperature polymer nanoprocessing fabrication techniques have been implemented for use in biomedical product creation. Polymeric nanofabrication techniques such as bonding, imprinting, and active biomolecule immobilization were demonstrated. Due to being CO2 assisted techniques, these processes are intrinsically inexpensive and environmentally benign.
520 $a In order to thoroughly investigate these nanofabrication techniques the interactions between CO2 and the polymer were examined on a thermodynamic level. Thermodynamic modeling results of high pressure CO2/polystyrene systems were used along with experimental bonding, imprinting, and immobilization results. It was found that the solubility of CO2 in a polymer matrix and the resulting reduction of the polymer glass transition temperature (T g) largely dictate the polymer chain mobility and therefore the polymer's processability. For instance, it was shown that the polymer bond strength of polystyrene, bonded via a CO2 assisted technique, depended largely on the proximity of the processing conditions to the reduced Tg curve. It was also found that low aspect ratio nanofeatures could be patterned by CO2 assisted nanoimprint lithography in polystyrene at conditions near the reduced Tg curve.
520 $a These CO2 assisted low temperature polymer processing techniques are now better understood in terms of the CO2/polymer thermodynamic properties, thus making these, and other similar, techniques easier to manage. This fundamental information can be applied to scaling-up these technologies so that inexpensive polymer biomedical products with nanofeatures can soon be commercially produced, thus benefiting the health of society.
590 $a School code: 0168.
650 4 $a Chemistry, Polymer. $3 1018428
650 4 $a Engineering, Chemical. $3 1018531
690 $a 0495
690 $a 0542
710 2 $a The Ohio State University. $3 718944
773 0 $t Dissertation Abstracts International $g 70-10B.
790 1 0 $a Tomasko, David L., $e advisor
790 $a 0168
791 $a Ph.D.
792 $a 2009
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3375840