Operating Procedures, Materials Treatment.

Electrodialysis and water reuse = novel approaches / by: (書目-電子資源)

Copper wire bonding by: (書目-電子資源)

Process control for sheet-metal stamping = process modeling, controller design and shop-floor implementation / by: (書目-電子資源)

Solid-liquid separation in the mining industry by: (書目-電子資源)

PGD-based modeling of materials, structures and processes by: (書目-電子資源)

An introduction to surface alloying of metals by: (書目-電子資源)

Machining of titanium alloys by: (書目-電子資源)

Traditional machining processes = research advances / by: (書目-電子資源)

Rolling contact fatigue in a vacuum = test equipment and coating analysis / by: (書目-電子資源)

Setup planning for machining by: (書目-電子資源)

Spare parts inventory control under system availability constraints by: (書目-電子資源)

Machining, joining and modifications of advanced materials by: (書目-電子資源)

Fundamentals of electroheat = electrical technologies for process heating / by: (書目-電子資源)

Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies = NEWTECH 2017 / by: (書目-電子資源)

Turbine blade investment casting die technology by: (書目-電子資源)

Structural hot-spot stress approach to fatigue analysis of welded components = designer's guide / by: (書目-電子資源)

Life cycle assessment = theory and practice / by: (書目-電子資源)

Ferrous Materials = Steel and Cast Iron / by: (書目-語言資料,印刷品)

Climate change and technological options = basic facts, evaluation and practical solutions / by: (書目-語言資料,印刷品)

Intelligentized methodology for arc welding dynamical processes = visual information acquiring, knowledge modeling and intelligent control / by: (書目-語言資料,印刷品)

Applied machining technology by: (書目-語言資料,印刷品)

Torsion and shear stresses in ships by: (書目-語言資料,印刷品)

Advanced steels = the recent scenario in steel science and technology / by: (書目-電子資源)

Machining with abrasives by: (書目-電子資源)

Sustainability in energy and buildings = results of the second International Conference on Sustainability in Energy and Buildings (SEB'10) / by: (書目-電子資源)

Tandem cold metal rolling mill control = using practical advanced methods / by: (書目-電子資源)

Tailored light.. 2,. Laser application technology by: (書目-電子資源)

Design and manufacturing of active microsystems by: (書目-電子資源)

Metal and alloy bonding = an experimental analysis ; charge density in metals and alloys / by: (書目-電子資源)

Combustion engines development = mixture formation, combustion, emissions and simulation / by: (書目-電子資源)

Advances in numerical modeling of adhesive joints by: (書目-電子資源)

Commercial-industrial cleaning, by pressure-washing, hydro-blasting and UHP-jetting = the business operating model and how-to manual for 450 specific applications / by: (書目-電子資源)

Warehousing in the global supply chain = advanced models, tools and applications for storage systems / by: (書目-電子資源)

Machining of complex sculptured surfaces by: (書目-電子資源)

Condition monitoring using computational intelligence methods = applications in mechanical and electrical systems / by: (書目-電子資源)

Customer-driven supply chains = from glass pipelines to open innovation networks / by: (書目-電子資源)

Structural connections for lightweight metallic structures by: (書目-電子資源)

Hybrid modeling and optimization of manufacturing = combining artificial intelligence and finite element method / by: (書目-電子資源)

Smart design = first International Conference Proceedings / by: (書目-電子資源)

Innovative superhard materials and sustainable coatings for advanced manufacturing by: (書目-電子資源)

Environmental silicate nano-biocomposites by: (書目-電子資源)

Modelling of powder die compaction by: (書目-電子資源)

Assembly line planning and control by: (書目-電子資源)

New production technologies in aerospace industry = proceedings of the 4th Machining Innovations Conference, Hannover, September 2013 / by: (書目-電子資源)

Basic transport phenomena in materials engineering by: (書目-電子資源)

Engineering ethics = challenges and opportunities / by: (書目-電子資源)

Float glass innovation in the flat glass industry by: (書目-電子資源)

International operations networks by: (書目-電子資源)

Structural properties of porous materials and powders used in different fields of science and technology by: (書目-電子資源)

Flexural testing of weld site and HVOF coating characteristics by: (書目-電子資源)

Friction stir welding and processing = science and engineering / by: (書目-電子資源)

Analysis of fracture toughness mechanism in ultra-fine-grained steels = the effect of the treatment developed in NIMS / by: (書目-電子資源)

Progress in scale modeling. = selections from the International Symposia on Scale Modeling, ISSM VI (2009) and ISSM VII (2013) /. Volume II by: (書目-電子資源)

Material selections by a hybrid multi-criteria approach by: (書目-電子資源)

Micro and nano fabrication = tools and processes / by: (書目-電子資源)

Physical asset management = with an introduction to ISO55000 / by: (書目-電子資源)

Microstructure and properties of ductile iron and compacted graphite iron castings = the effects of mold sand/metal interface phenomena / by: (書目-電子資源)

9th WCEAM research papers. = Proceedings of 2014 World Congress on Engineering Asset Management. Volume 1 : by: (書目-電子資源)

Flame spray technology = method for production of nanopowders / by: (書目-電子資源)

Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints by: (書目-電子資源)

Risk management of non-renewable energy systems by: (書目-電子資源)

Grind hardening process by: (書目-電子資源)

Modern manufacturing engineering by: (書目-語言資料,印刷品)

Energy and resource efficiency in aluminium die casting by: (書目-電子資源)

Textile materials for lightweight constructions = technologies - methods - materials - properties / by: (書目-電子資源)

Innovative process development in metallurgical industry = concept to commission / by: (書目-電子資源)

Materials and processes = for spacecraft and high reliability applications / by: (書目-電子資源)

Recommendations for fatigue design of welded joints and components by: (書目-電子資源)

Design of experiments in production engineering by: (書目-電子資源)

Ecotribology = research developments / by: (書目-電子資源)

Aluminum matrix composites reinforced with alumina nanoparticles by: (書目-電子資源)

Life cycle and sustainability of abrasive tools by: (書目-電子資源)

Separation hydrometallurgy of rare earth elements by: (書目-電子資源)

IIW guidelines on weld quality in relationship to fatigue strength by: (書目-電子資源)

Defect sizing using non-destructive ultrasonic testing = applying bandwidth-dependent DAC and DGS curves / by: (書目-電子資源)

Machining of bone and hard tissues by: (書目-電子資源)

IIW recommendations for the HFMI treatment = for improving the fatigue strength of welded joints / by: (書目-電子資源)

Multiscale modelling in sheet metal forming by: (書目-電子資源)

Concentrating solar thermal technologies = analysis and optimisation by CFD modelling / by: (書目-電子資源)

Powder consolidation using cold spray = process modeling and emerging applications / by: (書目-電子資源)

Aerospace materials and material technologies.. Volume 2,. Aerospace material technologies by: (書目-電子資源)

Surface mining machines = problems of maintenance and modernization / by: (書目-電子資源)

Acoustic emission = methodology and application / by: (書目-電子資源)

Laser beam micro-milling of micro-channels in aerospace alloys by: (書目-電子資源)

Discontinuously reinforced titanium matrix composites = microstructure design and property optimization / by: (書目-電子資源)

Ultraprecision machining of hybrid freeform surfaces using multiple-axis diamond turning by: (書目-電子資源)

Metal sprays and spray deposition by: (書目-電子資源)

Plasma surface metallurgy = with double glow discharge technology--Xu-Tec process / by: (書目-電子資源)

Applied physics, system science and computers = proceedings of the 1st International Conference on Applied Physics, System Science and Computers (APSAC2016), September 28-30, Dubrovnik, Croatia / by: (書目-電子資源)

Non-destructive testing and repair of Pipelines by: (書目-電子資源)

Intelligent fixtures for the manufacturing of low rigidity components by: (書目-電子資源)

Thermal effects in complex machining processes = final report of the DFG Priority Programme 1480 / by: (書目-電子資源)

Laser metal deposition process of metals, alloys, and composite materials by: (書目-電子資源)

Modeling steel deformation in the semi-solid state by: (書目-電子資源)

Concurrent conceptual design and materials selection of natural fiber composite products by: (書目-電子資源)

Transdisciplinary systems engineering = exploiting convergence in a hyper-connected world / by: (書目-電子資源)

Best practices for the use of simulation in POD curves estimation = application to UT weld inspection / by: (書目-電子資源)

Problems & solutions in inventory management by: (書目-電子資源)

Flow visualization in materials processing = practical techniques and selected applications / by: (書目-電子資源)

Thermal plasma processing of ilmenite by: (書目-電子資源)

Frontiers in materials processing, applications, research and technology = select proceedings of FiMPART 2015 / by: (書目-電子資源)

The metallurgy of anodizing aluminum = connecting science to practice / by: (書目-電子資源)

Shock and materials by: (書目-電子資源)

Advances in materials processing = proceedings of Chinese Materials Conference 2017 / by: (書目-電子資源)

Fundamentals of optimization = methods, minimum principles, and applications for making things better / by: (書目-電子資源)

Machining difficult-to-cut materials = basic principles and challenges / by: (書目-電子資源)

Hot stamping of ultra high-strength steels = from a technological and business perspective / by: (書目-電子資源)

Mechanics of additive and advanced manufacturing. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 8 : by: (書目-電子資源)

Selective laser melting of novel titanium-tantalum alloy as orthopaedic biomaterial by: (書目-電子資源)

Chemical vapour deposition = an integrated engineering design for advanced materials / by: (書目-語言資料,印刷品)

Configurable intelligent optimization algorithm = design and practice in manufacturing / by: (書目-電子資源)

Electrically assisted forming = modeling and control / by: (書目-電子資源)

Induction and direct resistance heating = theory and numerical modeling / by: (書目-電子資源)

Engineering asset management = Systems, professional practices and certification : proceedings of the 8th World Congress on Engineering Asset Management (WCEAM 2013) & the 3rd International Conference on Utility Management & Safety (ICUMAS) / by: (書目-電子資源)

Anaerobic technology in pulp and paper industry by: (書目-電子資源)

Extraction of nuclear and non-ferrous metals by: (書目-電子資源)

Green urea = for future sustainability / by: (書目-電子資源)

Strengthening and Joining by Plastic Deformation = select papers from AIMTDR 2016 / by: (書目-電子資源)

Interdisciplinary treatment to arc welding power sources by: (書目-電子資源)

Applied physics, system science and computers II = proceedings of the 2nd International Conference on Applied Physics, System Science and Computers (APSAC2017), September 27-29, 2017, Dubrovnik, Croatia / by: (書目-電子資源)

Sustainable manufacturing and remanufacturing management = process planning, optimization and spplications / by: (書目-電子資源)

Additive manufacturing = developments in training and education / by: (書目-電子資源)

Energy efficient microwave systems = materials processing technologies for avionic, mobility and environmental applications / by: (書目-語言資料,印刷品)

Manufacturing processes 2 = grinding, honing, lapping / by: (書目-語言資料,印刷品)

Burrs - analysis, control and removal = Proceedings of the CIRP International Conference on Burrs, 2nd-3rd April, 2009, University of Kaiserslautern, Germany / by: (書目-語言資料,印刷品)

Advanced control and supervision of mineral processing plants by: (書目-語言資料,印刷品)

Geometry of single-point turning tools and drills = fundamentals and practical applications / by: (書目-語言資料,印刷品)

Laser material processing by: (書目-語言資料,印刷品)

Engineering asset management 2011 = proceedings of the sixth world congress on engineering asset management / by: (書目-電子資源)

Laser pulse heating of surfaces and thermal stress analysis by: (書目-電子資源)

Thermal spray fundamentals = from powder to part / by: (書目-電子資源)

Random maintenance policies by: (書目-電子資源)

High-power optics = lasers and applications / by: (書目-電子資源)

Metal matrix composites = synthesis, wear characteristics, machinability study of MMC brake drum / by: (書目-電子資源)

Proceedings of the 7th World Congress on Engineering Asset Management (WCEAM 2012) by: (書目-電子資源)

Method of dimensionality reduction in contact mechanics and friction by: (書目-電子資源)

Urban mining systems by: (書目-電子資源)

Modern cold spray = materials, process, and applications / by: (書目-電子資源)

Manufacturing of natural fibre reinforced polymer composites by: (書目-電子資源)

Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015) by: (書目-電子資源)

Bevel gear = fundamentals and applications / by: (書目-電子資源)

Semi-solid processing of aluminum alloys by: (書目-電子資源)

Plasma and thermal spraying by: (書目-電子資源)

Design and development of metal-forming processes and products aided by finite element simulation by: (書目-電子資源)

Modeling steel deformation in the semi-solid state by: (書目-電子資源)

Evolution of metal casting technologies = a historical perspective / by: (書目-電子資源)

Small machine tools for small workpieces = final report of the DFG Priority Program 1476 / by: (書目-電子資源)

Non-traditional micromachining processes = fundamentals and applications / by: (書目-電子資源)

Basics of laser physics = for students of science and engineering / by: (書目-電子資源)

Sensors, algorithms and applications for structural health monitoring = IIW Seminar on SHM, 2015 / by: (書目-電子資源)

Modeling and simulation of functionalized materials for additive manufacturing and 3D printing = continuous and discrete media : continuum and discrete element methods / by: (書目-電子資源)

Recycling of lithium-ion batteries = the LithoRec way / by: (書目-電子資源)

Stiff extrusion briquetting in metallurgy by: (書目-電子資源)

Tailored light.. 1,. High power lasers for production by: (書目-電子資源)

Advanced noncontact cutting and joining technologies = micro- and nano-manufacturing / by: (書目-電子資源)

Mechanical properties and working of metals and alloys by: (書目-電子資源)

Handbook of adhesion technology by: (書目-電子資源)

Advanced materials processing and manufacturing by: (書目-電子資源)