Continuum Mechanics and Mechanics of Materials.

IUTAM Symposium on Impact Biomechanics: From Fundamental Insights to Applications by: (Language materials, printed)

Polymer Engineering Science and Viscoelasticity = An Introduction / by: (Language materials, printed)

Introduction to Relativistic Continuum Mechanics by: (Language materials, printed)

Tribology of Diamond-Like Carbon Films = Fundamentals and Applications / by: (Language materials, printed)

Analysis of Failure in Fiber Polymer Laminates = The Theory of Alfred Puck / by: (Language materials, printed)

Mechanical Response of Composites by: (Language materials, printed)

Symmetric galerkin boundary element method by: (Language materials, printed)

Shear localization in granular bodies with micro-polar hypoplasticity by: (Language materials, printed)

Charged semiconductor defects = structure, thermodynamics and diffusion / by: (Language materials, printed)

Neutron applications in earth, energy and environmental sciences by: (Language materials, printed)

Neutron imaging and applications = a reference for the imaging community / by: (Language materials, printed)

Strength and stiffness of engineering systems by: (Language materials, printed)

Mechanics of microstructured solids 2 = cellular materials, fibre reinforced solids and soft tissues / by: (Language materials, printed)

Non-linear mechanics of materials by: (Language materials, printed)

Bounding uncertainty in civil engineering = theoretical background / by: (Language materials, printed)

Continuous media with microstructure by: (Language materials, printed)

Springer handbook of nanotechnology by: (Language materials, printed)

Contact mechanics and friction = physical principles and applications / by: (Language materials, printed)

Rapid tooling guidelines for sand casting by: (Language materials, printed)

Theory of elasticity by: (Language materials, printed)

Development and application of the finite element method based on MATLAB by: (Language materials, printed)

Theory of bridge aerodynamics by: (Language materials, printed)

Innovative technological materials = structural properties by neutron scattering, synchrotron radiation and modeling / by: (Language materials, printed)

Finite rotation shells = basic equations and finite elements for reissner kinematics / by: (Language materials, printed)

Bifurcations, instabilities and degradations in geomaterials by: (Electronic resources)

Long-term durability of polymeric matrix composites by: (Electronic resources)

Materials with complex behaviour II = properties, non-classical materials and new technologies / by: (Electronic resources)

Damage and fracture of composite materials and structures by: (Electronic resources)

Computational viscoelasticity by: (Electronic resources)

The virtual fields method = extracting constitutive mechanical parameters from full-field deformation measurements / by: (Electronic resources)

Terminal ballistics by: (Electronic resources)

Mechanical behaviour of soils under environmentally induced cyclic loads by: (Electronic resources)

Generalized continua and dislocation theory = theoretical concepts, computational methods and experimental verification / by: (Electronic resources)

Advances in soft matter mechanics by: (Electronic resources)

Crystallization modalities in polymer melt processing = Fundamental Aspects of Structure Formation / by: (Electronic resources)

Shock wave compression of condensed matter = a primer / by: (Electronic resources)

A variational approach to fracture and other inelastic phenomena by: (Electronic resources)

Plasticity and beyond = microstructures, crystal-plasticity and phase transitions / by: (Electronic resources)

Plasticity of pressure-sensitive materials by: (Electronic resources)

Durability of composites in a marine environment by: (Electronic resources)

Constitutive relations under impact loadings = experiments, theoretical and numerical aspects / by: (Electronic resources)

Injection technologies for the repair of damaged concrete structures by: (Electronic resources)

Failure analysis = fundamentals and applications in mechanical components / by: (Electronic resources)

Nonlinear mechanics of thin-walled structures = asymptotics, direct approach and numerical analysis / by: (Electronic resources)

Nonlinear theory of electroelastic and magnetoelastic interactions by: (Electronic resources)

Solder joint reliability assessment = finite element simulation methodology / by: (Electronic resources)

Nonlinear elastic waves in materials by: (Electronic resources)

Mechanical properties of ceramics by: (Electronic resources)

Phenomena and computational models of non-proportional fatigue of materials by: (Electronic resources)

Mechatronic systems = theory and applications : Proceedings of the second Workshop on Mechatronic Systems JSM'2014 / by: (Electronic resources)

Mathematical and computational analyses of cracking formation = fracture morphology and its evolution in engineering materials and structures / by: (Electronic resources)

Mathematical Methods for Elastic Plates by: (Electronic resources)

Reduced order methods for modeling and computational reduction by: (Electronic resources)

Rheophysics = matter in all its states / by: (Electronic resources)

Strength of materials and theory of elasticity in 19th century Italy = a brief account of the history of mechanics of solids and structures / by: (Electronic resources)

A finite element primer for beginners = the basics / by: (Electronic resources)

Method of dimensionality reduction in contact mechanics and friction by: (Electronic resources)

Introduction to Computational Micromechanics by: (Language materials, printed)

Uncertainty Assessment of Large Finite Element Systems by: (Language materials, printed)

Models for Polymeric and Anisotropic Liquids by: (Language materials, printed)

Hot Cracking Phenomena in Welds by: (Language materials, printed)

An Introduction to the Theory of Piezoelectricity by: (Language materials, printed)

Unsaturated Soils: Experimental Studies = Proceedings of the International Conference "From Experimental Evidence towards Numerical Modeling of Unsaturated Soils", Weimar, Germany, September 18-19, 2003 Volume I/ by: (Language materials, printed)

Engineering Damage Mechanics = Ductile, Creep, Fatigue and Brittle Failures / by: (Language materials, printed)

Basics of Aerothermodynamics by: (Language materials, printed)

Inelastic Analysis of Solids and Structures by: (Language materials, printed)

The Engineer and the Scandal = A Piece of Science History / by: (Language materials, printed)

Mechanics of Composite Materials with MATLAB by: (Language materials, printed)

Creep Mechanics by: (Language materials, printed)

Flow and Transport in Fractured Porous Media by: (Language materials, printed)

Efficient Numerical Methods and Information-Processing Techniques for Modeling Hydro- and Environmental Systems by: (Language materials, printed)

Mechanics of Material Forces by: (Language materials, printed)

Variational and Potential Methods for a Class of Linear Hyperbolic Evolutionary Processes by: (Language materials, printed)

Mathematics and Mechanics of Granular Materials by: (Language materials, printed)

Nanotribology and Nanomechanics = An Introduction / by: (Language materials, printed)

Collagen : = structure and mechanics by: (Language materials, printed)

Self-Consistent Methods for Composites. Vol. 2. Wave Propagation in Heterogeneous Materials / by: (Language materials, printed)

Multiscale Modeling and Simulation of Composite Materials and Structures by: (Language materials, printed)

Structures Under Crash and Impact = Continuum Mechanics, Discretization and Experimental Characterization / by: (Language materials, printed)

Solid Particle Erosion = Occurrence, Prediction and Control / by: (Language materials, printed)

Self-Consistent Methods for Composites = Vol.1: Static Problems / by: (Language materials, printed)

Biology and Mechanics of Blood Flows. Biology / by: (Language materials, printed)

Biology and Mechanics of Blood Flows. II. Mechanics and Medical Aspects / by: (Language materials, printed)

Defect and Material Mechanics = Proceedings of the International Symposium on Defect and Material Mechanics (ISDMM), held in Aussois, France, March 25-29, 2007 / by: (Language materials, printed)

The Variational Approach to Fracture by: (Language materials, printed)

Fundamentals of shock wave propagation in solids by: (Language materials, printed)

Microbiologically Influenced Corrosion = An Engineering Insight / by: (Language materials, printed)

Engineering Fluid Mechanics by: (Language materials, printed)

Lifetime Estimation of Welded Joints by: (Language materials, printed)

Continuum Mechanics by: (Language materials, printed)

Machining = Fundamentals and Recent Advances / by: (Language materials, printed)

Information Geometry = Near Randomness and Near Independence / by: (Language materials, printed)

Hot Cracking Phenomena in Welds II by: (Language materials, printed)

Atomistic Modeling of Materials Failure by: (Language materials, printed)

Creep Mechanics by: (Language materials, printed)

Springer handbook of experimental solid mechanics by: (Language materials, printed)

IUTAM Symposium on theoretical, computational and modelling aspects of inelastic media = proceedings of the IUTAM Symposium held at Cape Town, South Africa, January 14-18, 2008 / by: (Language materials, printed)

Finite element methods for engineering sciences = Theoretical approach and problem solving techniques / by: (Language materials, printed)

Mechanochemistry in nanoscience and minerals engineering by: (Language materials, printed)

Modeling of adhesively bonded joints by: (Language materials, printed)

Micro-macro-interaction = in structured media and particle systems / by: (Language materials, printed)

Contact problems = the legacy of L.A. Galin / by: (Language materials, printed)

Geotechnical Earthquake Engineering by: (Language materials, printed)

Service life prediction of polymeric materials = global perspectives / by: (Language materials, printed)

Iutam symposium on scaling in solid mechanics = proceedings of the Iutam symposium held in Cardiff, UK, 25-29 June, 2007 / by: (Language materials, printed)

Thermal stresses : = advanced theory and applications by: (Language materials, printed)

The theory of laser materials processing = heat and mass transfer in modern technology / by: (Language materials, printed)

IUTAM symposium on mechanical properties of cellular materials = proceedings of the IUTAM Symposium on Mechanical Properties of Cellular Materials, held September 17-20, 2007, LMT-Cachan, Cachan, France/ by: (Language materials, printed)

Mechanics and control of soft-fingered manipulation by: (Language materials, printed)

Limit states of materials and structures = direct methods / by: (Language materials, printed)

Tensor algebra and tensor analysis for engineers = with applications to continuum mechanics / by: (Language materials, printed)

Elastoplasticity theory by: (Language materials, printed)

Variational inequalities with applications = a study of antiplane frictional contact problems / by: (Language materials, printed)

Thermomechanics of viscoplasticity = fundamentals and applications / by: (Language materials, printed)

Nonlinear solid mechanics by: (Language materials, printed)

Mechanics of microstructured solids = cellular materials, fibre reinforced solids and soft tissues / by: (Language materials, printed)

Plates and FEM = surprises and pitfalls / by: (Language materials, printed)

Elasticity by: (Language materials, printed)

Hyperbolic conservation laws in continuum physics by: (Electronic resources)

Computer methods in mechanics = lectures of the CMM 2009 / by: (Language materials, printed)

Strength analysis in geomechanics by: (Language materials, printed)

Elastomere friction = theory, experiment and simulation / by: (Language materials, printed)

Mechanics of generalized continua = one hundred years after the Cosserats / by: (Language materials, printed)

Micromechanisms of fracture and fatigue = in a multiscale context / by: (Language materials, printed)

IUTAM symposium on variational concepts with applications to the mechanics of materials = Proceedings of the IUTAM Symposium on Variational Concepts with Applications to the Mechanics of Materials, Bochum, Germany, September 22-26, 2008 / by: (Language materials, printed)

Polyharmonic boundary value problems = positivity preserving and nonlinear higher order elliptic equations in bounded domains / by: (Language materials, printed)

MATLAB guide to finite elements = an interactive approach / by: (Language materials, printed)

Nanoscale magnetic materials and applications by: (Language materials, printed)

International conference on advancements of medicine and health care through technology = 23-26 September, 2009, Cluj-Napoca, Romania / by: (Language materials, printed)

Cracked rotors = a survey on static and dynamic behaviour including modelling and diagnosis / by: (Language materials, printed)

Dynamic failure of materials and structures by: (Language materials, printed)

Modelling with transparent soils = visualizing soil structure interaction and multi phase flow, non-intrusively / by: (Language materials, printed)

Introductory MEMS = fabrication and applications / by: (Language materials, printed)

Applied plasticity by: (Language materials, printed)

Finite element analysis of beam-to-beam contact by: (Language materials, printed)

Engineering dynamics = a primer / by: (Language materials, printed)

26th Southern Biomedical Engineering Conference SBEC 2010, April 30 - May 2, 2010, College Park, Maryland, USA by: (Language materials, printed)

Singular problems in shell theory = computing and asymptotics / by: (Language materials, printed)

Torsion and shear stresses in ships by: (Language materials, printed)

Materials with complex behaviour = modelling, simulation, testing, and applications / by: (Language materials, printed)

Constrained deformation of materials = devices, heterogeneous structures and thermo-mechanical modeling / by: (Language materials, printed)

Anisotropic elastic plates by: (Language materials, printed)

6th World Congress of Biomechanics (WCB 2010), August 1-6, 2010 Singapore = in conjunction with 14th International Conference on Biomedical Engineering (ICBME) and 5th Asia Pacific Conference on Biomechanics (APBiomech)/ by: (Language materials, printed)

Continuum mechanics = advanced topics and research trends / by: (Language materials, printed)

In-situ studies with photons, neutrons and electrons scattering by: (Language materials, printed)

Machining of hard materials by: (Electronic resources)

Interference-optical methods of solid mechanics by: (Electronic resources)

Particle-based methods = fundamentals and applications / by: (Electronic resources)

Engineering mechanics.. 2,. Mechanics of materials by: (Electronic resources)

Engineering mechanics.. 3,. Dynamics by: (Electronic resources)

Lead free solder = mechanics and reliability / by: (Electronic resources)

Advances in numerical modeling of adhesive joints by: (Electronic resources)

Elasticity and plasticity of large deformations = an introduction / by: (Electronic resources)

Thermodynamics of materials with memory = theory and applications / by: (Electronic resources)

Biomimetics in materials science = self-healing, self-lubricating, and self-cleaning materials / by: (Electronic resources)

Analysis and design of biological materials and structures by: (Electronic resources)

Transport processes in porous media by: (Electronic resources)

Molecular modeling and multiscaling issues for electronic material applications by: (Electronic resources)

Constitutive modelling in geomechanics = introduction / by: (Electronic resources)

Fracture mechanics by: (Electronic resources)

Structural connections for lightweight metallic structures by: (Electronic resources)

Hybrid modeling and optimization of manufacturing = combining artificial intelligence and finite element method / by: (Electronic resources)

Continuum damage mechanics = a continuum mechanics approach to the analysis of damage and fracture / by: (Electronic resources)

Phase change in mechanics by: (Electronic resources)

Electromagnetic properties of multiphase dielectrics = a primer on modeling, theory and computation / by: (Electronic resources)

Soft tissue biomechanical modeling for computer assisted surgery by: (Electronic resources)

Mechanics of failure mechanisms in structures by: (Electronic resources)

Variational analysis and aerospace engineering = mathematical challenges for aerospace design : contributions from a workshop held at the School of Mathematics in Erice, Italy / by: (Electronic resources)

Analytical methods in anisotropic elasticity = with symbolic computational tools / by: (Electronic resources)

Computational biomechanics for medicine = deformation and flow / by: (Electronic resources)

Upper bound limit load solutions for welded joints with cracks by: (Electronic resources)

Classical mechanics with Mathematica by: (Electronic resources)

Continuum damage mechanics and numerical applications by: (Electronic resources)

Rheology and non-newtonian fluids by: (Electronic resources)

Elastoplasticity theory by: (Electronic resources)

Multiple impacts in dissipative granular chains by: (Electronic resources)

Dynamics and Vibrations = Progress in Nonlinear Analysis / by: (Electronic resources)

Fracture and fatigue. = proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Electronic resources)

Experimental mechanics of composite, hybrid, and multifunctional materials. = proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics /. Volume 6 by: (Electronic resources)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics /. Volume 8 by: (Electronic resources)

Theory of electroelasticity by: (Electronic resources)

Computational Biomechanics of the Hip Joint by: (Electronic resources)

Peridynamic theory and its applications by: (Electronic resources)

Modeling of carbon nanotubes, graphene and their composites by: (Electronic resources)

Rheological and seismic properties of solid-melt systems = a mechanical spectroscopy study / by: (Electronic resources)

Introduction to solid mechanics = an integrated approach / by: (Electronic resources)

Circular cylinders and pressure vessels = stress analysis and design / by: (Electronic resources)

Mechanics of moving materials by: (Electronic resources)

Alkali activated materials = state-of-the-art report, RILEM TC 224-AAM / by: (Electronic resources)

Stability of non-linear constitutive formulations for viscoelastic fluids by: (Electronic resources)

The history of theoretical, material and computational mechanics - Mathematics meets mechanics and engineering by: (Electronic resources)

Mechanics of masonry structures by: (Electronic resources)

Continuum mechanics through the eighteenth and nineteenth centuries = historical perspectives from John Bernoulli (1727) to Ernst Hellinger (1914) / by: (Electronic resources)

PGD-based modeling of materials, structures and processes by: (Electronic resources)

Engineering Mechanics.. 3,. Dynamics by: (Electronic resources)

Encyclopedia of thermal stresses by: (Electronic resources)

A first course in ordinary differential equations = analytical and numerical methods / by: (Electronic resources)

Numerical modeling of materials under extreme conditions by: (Electronic resources)

Mathematical and numerical methods for partial differential equations = applications for engineering sciences / by: (Electronic resources)

In-situ studies with photons, neutrons and electrons scattering II by: (Electronic resources)

Crystallographic texture of materials by: (Electronic resources)

Friction stir welding and processing = science and engineering / by: (Electronic resources)

The nature of motive force by: (Electronic resources)

Elasto-plasticity of frame structure elements = modeling and simulation of rods and beams / by: (Electronic resources)

Trends in nanoscale mechanics = mechanics of carbon nanotubes, graphene, nanocomposites and molecular dynamics / by: (Electronic resources)

Dynamics of mechanical systems with variable mass by: (Electronic resources)

Multiscale modeling of complex materials = phenomenological, theoretical and computational aspects / by: (Electronic resources)

Continuum mechanics using Mathematica = fundamentals, methods, and applications / by: (Electronic resources)

Durability of reinforced concrete from composition to protection = selected papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013 / by: (Electronic resources)

Handbook of materials structures, properties, processing and performance by: (Electronic resources)

Introduction to nonlinear finite element analysis by: (Electronic resources)

Deformation and fracture of solid-state materials = field theoretical approach and engineering applications / by: (Electronic resources)

Developments in the flow of complex fluids in tubes by: (Electronic resources)

Biomedical technology by: (Electronic resources)

Molecular modeling and multiscaling issues for electronic material applications.. Volume 2 by: (Electronic resources)

Stochastic modeling of thermal fatigue crack growth by: (Electronic resources)

The ISRM suggested methods for rock characterization, testing and monitoring = 2007-2014 / by: (Electronic resources)

Fracture, fatigue, failure, and damage evolution. = proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 5 by: (Electronic resources)

Experimental and applied mechanics. = proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 6 by: (Electronic resources)

Composite, hybrid, and multifunctional materials. = proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 4 by: (Electronic resources)

Handbook of damage mechanics = nano to macro scale for materials and structures / by: (Electronic resources)

Shell and membrane theories in mechanics and biology = from macro- to nanoscale structures / by: (Electronic resources)

Service life prediction of exterior plastics = vision for the future / by: (Electronic resources)

Fluid mechanics of viscoplasticity by: (Electronic resources)

Dynamics of pre-strained bi-material elastic systems = linearized three-dimensional approach / by: (Electronic resources)

Inelastic behavior of materials and structures under monotonic and cyclic loading by: (Electronic resources)

Tensor algebra and tensor analysis for engineers = with applications to continuum mechanics / by: (Electronic resources)

Geometric continuum mechanics and induced beam theories by: (Electronic resources)

The pullout performance of pedicle screws by: (Electronic resources)

Geometrical foundations of continuum mechanics = an application to first- and second-order elasticity and elasto-plasticity / by: (Electronic resources)

Frontiers of graphene and carbon nanotubes = devices and applications / by: (Electronic resources)

Theoretical and applied aerodynamics = and related numerical methods / by: (Electronic resources)

Design of shape memory alloy (SMA) actuators by: (Electronic resources)

From creep damage mechanics to homogenization methods = a Liber Amicorum to celebrate the birthday of Nobutada Ohno / by: (Language materials, printed)

Mechanical and materials engineering of modern structure and component design by: (Language materials, printed)

Applications of computational tools in biosciences and medical engineering by: (Language materials, printed)

Solid mechanics = theory, modeling, and problems / by: (Language materials, printed)

Contact mechanics of articular cartilage layers = Asymptotic Models / by: (Language materials, printed)

Science and engineering of casting solidification by: (Electronic resources)

Diffusion in ceramics by: (Electronic resources)

Effects of magnetoelastic interactions in conductive plates and shells by: (Electronic resources)

Mechanics of biological systems and materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 6 by: (Electronic resources)

Materials with internal structure = multiscale and multifield modeling and simulation / by: (Electronic resources)

Recommendations for fatigue design of welded joints and components by: (Electronic resources)

Cracking phenomena in welds IV by: (Electronic resources)

Defect sizing using non-destructive ultrasonic testing = applying bandwidth-dependent DAC and DGS curves / by: (Electronic resources)

Polymer nanocomposites = towards multi-functionality / by: (Electronic resources)

Dynamics of smart systems and structures = concepts and applications / by: (Electronic resources)

IIW recommendations for the HFMI treatment = for improving the fatigue strength of welded joints / by: (Electronic resources)

Discontinuous-fibre reinforced composites = fundamentals of stress transfer and fracture mechanics / by: (Electronic resources)

Introduction to solid mechanics = an integrated approach / by: (Electronic resources)

Modeling steel deformation in the semi-solid state by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Joining technologies for composites and dissimilar materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics  /. Volume 10 by: (Electronic resources)

Variational methods in molecular modeling by: (Electronic resources)

Contact mechanics and friction = physical principles and applications / by: (Electronic resources)

Mathematical modelling in solid mechanics by: (Electronic resources)

Wave dynamics and composite mechanics for microstructured materials and metamaterials by: (Electronic resources)

Mechanics for materials and technologies by: (Electronic resources)

Fundamentals of tensor calculus for engineers with a primer on smooth manifolds by: (Electronic resources)

On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact by: (Electronic resources)

Generalized dynamics of soft-matter quasicrystals = mathematical models and solutions / by: (Electronic resources)

Durability of Springs by: (Electronic resources)

Biomedical technology = modeling, experiments and simulation / by: (Electronic resources)

Plasticity and fracture by: (Electronic resources)

Fracture, fatigue, failure and damage evolution. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Electronic resources)

Strain gradient plasticity-based modeling of damage and fracture by: (Electronic resources)

Structural hot-spot stress approach to fatigue analysis of welded components = designer's guide / by: (Electronic resources)

Modeling and design of flexible pavements and materials by: (Electronic resources)

Modeling steel deformation in the semi-solid state by: (Electronic resources)

Mechanics of additive and advanced manufacturing. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 9 by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Challenges in mechanics of time dependent materials. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Mechanics of composite and multi-functional materials. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 6 by: (Electronic resources)

Asymptotical mechanics of composites = modelling composites without FEM / by: (Electronic resources)

A project-based introduction to computational statics by: (Electronic resources)

New acoustics based on metamaterials by: (Electronic resources)

Experimentation methodology for engineers by: (Electronic resources)

Testing and characterization of sustainable innovative bituminous materials and systems = state-of-the-art report of the RILEM Technical Committee 237-SIB / by: (Electronic resources)

Generalized models and non-classical approaches in complex materials.. 1 by: (Electronic resources)

The Kolsky-Hopkinson bar machine = selected topics / by: (Electronic resources)

Micromechanics of materials, with applications by: (Electronic resources)

Engineering fluid mechanics by: (Electronic resources)

Contact modeling for solids and particles by: (Electronic resources)

Long-life design and test technology of typical aircraft structures by: (Electronic resources)

Handbook of adhesion technology by: (Electronic resources)

Corrosion and stress corrosion testing of aerospace vehicle structural alloys by: (Electronic resources)

Mechanisms of cracking and debonding in asphalt and composite pavements = state-of-the-art of the RILEM TC 241-MCD / by: (Electronic resources)

Covariance and gauge invariance in Continuum Physics = application to mechanics, gravitation, and electromagnetism / by: (Electronic resources)

Fractal approach to tribology of elastomers by: (Electronic resources)

Problems of nonlinear mechanics and physics of materials by: (Electronic resources)

Multiscale mechanobiology in tissue engineering by: (Electronic resources)

Cosserat continuum mechanics = with applications to granular media / by: (Electronic resources)

Active origami = modeling, design, and applications / by: (Electronic resources)

Damage tolerance of metallic aircraft structures = materials and numerical modelling / by: (Electronic resources)

Challenges in mechanics of time-dependent materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 2 : by: (Electronic resources)

Mechanics of additive and advanced manufacturing. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 8 : by: (Electronic resources)

First RILEM International Conference on Concrete and Digital Fabrication - Digital Concrete 2018 by: (Electronic resources)

Fabrication and processing of shape memory alloys by: (Electronic resources)

Human memory and material memory by: (Electronic resources)

Internal erosion in earthdams, dikes and levees = proceedings of EWG-IE 26th Annual Meeting 2018 / by: (Electronic resources)

Non-linear continuum theories : = lectures given at a summer school of the Centro Internazionale Matematico Estivo (C.I.M.E.), held in Bressanone (Bolzano), Italy, May 31-June 9, 1965 / by: (Language materials, printed)

Mechanics of generalized continua by: (Electronic resources)

Modelling, simulation and software concepts for scientific-technological problems by: (Electronic resources)

Flexible multibody dynamics by: (Electronic resources)

Multiscale methods in computational mechanics = progress and accomplishments / by: (Electronic resources)

Computational methods for microstructure-property relationships by: (Electronic resources)

Intermediate mechanics of materials by: (Electronic resources)

Nonlinear mechanics of crystals by: (Electronic resources)

The finite element analysis of shells = fundamentals / by: (Electronic resources)

Split Hopkinson (Kolsky) bar = design, testing and applications / by: (Electronic resources)

Microsystems dynamics by: (Electronic resources)

Spatial contact problems in geotechnics = boundary-element method / by: (Electronic resources)

IUTAM symposium on multiscale modelling of fatigue, damage and fracture in smart materials = proceedings of the IUTAM Symposium on Multiscale Modelling of Fatigue, Damage and Fracture in Smart Materials, held in Freiberg, Germany, September 1-4, 2009 / by: (Electronic resources)

Nonlinear continuum mechanics and large inelastic deformations by: (Electronic resources)

Tandem cold metal rolling mill control = using practical advanced methods / by: (Electronic resources)

IUTAM Symposium on the vibration analysis of structures with uncertainties = proceedings of the IUTAM Symposium on the Vibration Analysis of Structures with Uncertainties held in St. Petersburg, Russia, July 5-9, 2009 / by: (Electronic resources)

Aeroelasticity = the continuum theory / by: (Electronic resources)

The effect of hydrogen and hydrides on the integrity of zirconium alloy components = delayed hydride cracking / by: (Electronic resources)

Mechanics and properties of composed materials and structures by: (Electronic resources)

Nanofabrication = principles, capabilities and limits / by: (Electronic resources)

Friction material composites = materials perspective / by: (Electronic resources)

Silicon carbide nanostructures = fabrication, structure, and properties / by: (Electronic resources)

The complete works of Gabrio Piola. = commented English translation /. Volume I by: (Electronic resources)

Multiscale modeling and uncertainty quantification of materials and structures = proceedings of the IUTAM Symposium held at Santorini, Greece, September 9-11, 2013 / by: (Electronic resources)

Differential geometry = basic notions and physical examples / by: (Electronic resources)

Design and computation of modern engineering materials by: (Electronic resources)

Similarity and symmetry methods = applications in elasticity and mechanics of materials / by: (Electronic resources)

Tensor analysis and elementary differential geometry for physicists and engineers by: (Electronic resources)

Deformation and flow of polymeric materials by: (Electronic resources)

Advances in metal forming = expert system for metal forming / by: (Electronic resources)

Mechanics of materials = an introduction to engineering technology / by: (Electronic resources)

Failure and damage analysis of advanced materials by: (Electronic resources)

Nonlinear mechanics of soft fibrous materials by: (Electronic resources)

Auxetic materials and structures by: (Electronic resources)

A primer on the geometry of carbon nanotubes and their modifications by: (Electronic resources)

Encyclopedia of microfluidics and nanofluidics by: (Electronic resources)

Polymer engineering science and viscoelasticity = an introduction / by: (Electronic resources)

Damage growth in aerospace composites by: (Electronic resources)

Numerical simulation of mechatronic sensors and actuators = finite elements for computational multiphysics / by: (Electronic resources)

Thermal degradation of polymer blends, composites and nanocomposites by: (Electronic resources)

Experimental stress analysis for materials and structures = stress analysis models for developing design methodologies / by: (Electronic resources)

Elastic/plastic discs under plane stress conditions by: (Electronic resources)

Analysis and computation of microstructure in finite plasticity by: (Electronic resources)

Mechanics of anisotropic materials by: (Electronic resources)

Holistic simulation of geotechnical installation processes = numerical and physical modelling / by: (Language materials, printed)

Thermal integrity in mechanics and engineering by: (Language materials, printed)

A bridge between conceptual frameworks = sciences, society and technology studies / by: (Language materials, printed)

Differential geometry and continuum mechanics by: (Electronic resources)

Vibro-acoustics.. Volume 1 by: (Electronic resources)

Rate-independent systems = theory and application / by: (Electronic resources)

Fundamentals of the mechanics of solids by: (Electronic resources)

Integral methods in science and engineering = theorical and computational advances / by: (Electronic resources)

Design and analysis of reinforced fiber composites by: (Electronic resources)

Recent trends in fracture and damage mechanics by: (Electronic resources)

The mechanics of ribbons and Mobius bands by: (Electronic resources)

Characterization of carbon nanotube based composites under consideration of defects by: (Electronic resources)

Tribology in sheet rolling technology by: (Electronic resources)

Finite element modeling of nanotube structures = linear and non-linear models / by: (Electronic resources)

Experimental and applied mechanics. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 4 by: (Electronic resources)

Dynamic behavior of materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

MEMS and nanotechnology. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 5 by: (Electronic resources)

Holistic simulation of geotechnical installation processes = benchmarks and simulations / by: (Electronic resources)

Hyperelasticity primer by: (Electronic resources)

Continuum mechanics through the ages - from the renaissance to the twentieth century = from hydraulics to plasticity / by: (Electronic resources)

Wave dynamics of generalized continua by: (Electronic resources)

Structure and Multiscale Mechanics of Carbon Nanomaterials by: (Electronic resources)

Continuum damage and fracture mechanics by: (Electronic resources)

Vibro-acoustics.. Volume 2 by: (Electronic resources)

Vibro-acoustics.. Volume 3 by: (Electronic resources)

Recent developments in anisotropic heterogeneous shell theory = general theory and applications of classical theory.. Volume 1 / by: (Electronic resources)

Statics of historic masonry constructions by: (Electronic resources)

Macroscopic and large scale phenomena = coarse graining, mean field limits and ergodicity / by: (Electronic resources)

Thermomechanics of composite structures under high temperatures by: (Electronic resources)

Generalized continua as models for classical and advanced materials by: (Electronic resources)

Continuous media with microstructure 2 by: (Electronic resources)

Terminal Ballistics by: (Electronic resources)

High-entropy alloys = fundamentals and applications / by: (Electronic resources)

Fundamentals of ultrasonic nondestructive evaluation = a modeling approach / by: (Electronic resources)

Poroelasticity by: (Electronic resources)

Suspensions of colloidal particles and aggregates by: (Electronic resources)

The state of deformation in Earthlike self-gravitating objects by: (Electronic resources)

Loadings in thermal barrier coatings of jet engine turbine blades = an experimental research and numerical modeling / by: (Electronic resources)

Advanced methods of continuum mechanics for materials and structures by: (Electronic resources)

Hyperbolic conservation laws in continuum physics by: (Electronic resources)

Computational modeling, optimization and manufacturing simulation of advanced engineering materials by: (Electronic resources)

Kinematic analysis of parallel manipulators by algebraic screw theory by: (Electronic resources)

Fatigue crack growth = detect - assess - avoid / by: (Electronic resources)

Introduction to nonlinear thermomechanics of solids by: (Electronic resources)

Automation of finite element methods by: (Electronic resources)

Innovative numerical approaches for multi-field and multi-scale problems = in honor of Michael Ortiz's 60th birthday / by: (Electronic resources)

Recent developments in anisotropic heterogeneous shell theory = applications of refined and three-dimensional theory.. Volume IIA / by: (Electronic resources)

Machining, joining and modifications of advanced materials by: (Electronic resources)

Recent developments in anisotropic heterogeneous shell theory = applications of refined and three-dimensional theory.. Volume IIB / by: (Electronic resources)

Mechanics of soft materials by: (Electronic resources)

Theoretical physics.. 1,. Classical mechanics by: (Electronic resources)

Theoretical physics.. 2,. Analytical mechanics by: (Electronic resources)

Transmission electron microscopy = diffraction, imaging, and spectrometry / by: (Electronic resources)

Multiscale materials modeling for nanomechanics by: (Electronic resources)

Mathematical theory of elasticity of quasicrystals and its applications by: (Electronic resources)

Photochemical behavior of multicomponent polymeric based materials by: (Electronic resources)

Unified Lagrangian formulation for fluid and solid mechanics = fluid-structure interaction and coupled thermal problems using the PFEM / by: (Electronic resources)

Computational reality = solving nonlinear and coupled problems in continuum mechanics / by: (Electronic resources)

The investigation of plastic behavior by discrete dislocation dynamics for single crystal pillar at submicron scale by: (Electronic resources)

Classical mechanics = Hamiltonian and Lagrangian formalism / by: (Electronic resources)

Statistical physics = a prelude and fugue for engineers / by: (Electronic resources)

EMR/ESR/EPR spectroscopy for characterization of nanomaterials by: (Electronic resources)

Simulation based engineering in solid mechanics by: (Electronic resources)

Problems and solutions in thermoelasticity and magnetothermoelasticity by: (Electronic resources)

Slope earthquake stability by: (Electronic resources)

Mathematical analysis of continuum mechanics and industrial applications = proceedings of the International Conference CoMFoS15 / by: (Electronic resources)

Proceedings of the 7th International Conference on Discrete Element Methods by: (Electronic resources)

Advanced finite element simulation with MSC Marc = application of user subroutines / by: (Electronic resources)

Holistic simulation of geotechnical installation processes = theoretical results and applications / by: (Electronic resources)

Variational continuum multiphase poroelasticity = theory and applications / by: (Electronic resources)

Materials design and applications by: (Electronic resources)

Electro-chemo-mechanics of solids by: (Electronic resources)

Modeling nonlinear problems in the mechanics of strings and rods = the role of the balance laws / by: (Electronic resources)

Fracture mechanics of piezoelectric solids with interface cracks by: (Electronic resources)

Bending behavior of thermoplastic composite sheets = viscoelasticity and temperature dependency in the draping process / by: (Electronic resources)

Divergence operator and related inequalities by: (Electronic resources)

Foundations of elastoplasticity = subloading surface model / by: (Electronic resources)

Internal variables in thermoelasticity by: (Electronic resources)

Understanding viscoelasticity = an introduction to rheology / by: (Electronic resources)

Model reduction of parametrized systems by: (Electronic resources)

Spectral and high order methods for partial differential equations ICOSAHOM 2016 = selected papers from the ICOSAHOM conference, June 27-July 1, 2016, Rio de Janeiro, Brazil / by: (Electronic resources)

Mathematical thermodynamics of complex fluids = Cetraro, Italy 2015 / by: (Electronic resources)

Mathematical aspects of multi-porosity continua by: (Electronic resources)

Micromechanics and nanomechanics of composite solids by: (Electronic resources)

Dynamics of mechanical systems with non-ideal excitation by: (Electronic resources)

The mechanics of jointed structures = recent research and open challenges for developing predictive models for structural dynamics / by: (Electronic resources)

Improved performance of materials = design and experimental approaches / by: (Electronic resources)

Interface fracture and delaminations in composite materials by: (Electronic resources)

Theory of elastic oscillations = equations and methods / by: (Electronic resources)

Singular solutions in plasticity by: (Electronic resources)

Anisotropic elasticity by: (Electronic resources)

Cancellous bone = mechanical characterization and finite element simulation / by: (Electronic resources)

Strain-hardening cement-based composites = SHCC4 / by: (Electronic resources)

Wave propagation and diffraction = mathematical methods and applications / by: (Electronic resources)

Magnetoelastic waves by: (Electronic resources)

Numerical simulation and experimental investigation of the fracture behaviour of an electron beam welded steel joint by: (Electronic resources)

Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture by: (Electronic resources)

Fracture mechanics = with an introduction to micromechanics / by: (Electronic resources)

A first introduction to the finite element analysis program MSC Marc/Mentat by: (Electronic resources)

Applications of fluid dynamics = proceedings of ICAFD 2016 / by: (Electronic resources)

Proceedings of fatigue, durability and fracture mechanics by: (Electronic resources)

Mathematical analysis of continuum mechanics and industrial applications II = proceedings of the International Conference CoMFoS16 / by: (Electronic resources)

Multiscale modeling of heterogeneous structures by: (Electronic resources)

A finite element primer for beginners = the basics / by: (Electronic resources)

Advances in mechanics of materials and structural analysis = in honor of Reinhold Kienzler / by: (Electronic resources)

Equivalent stress concept for limit state analysis by: (Electronic resources)

Creep and hygrothermal effects in concrete structures by: (Electronic resources)

Engineering applications for new materials and technologies by: (Electronic resources)

Vibrations of hollow elastic bodies by: (Electronic resources)

Indentation testing of biological materials by: (Electronic resources)

Residual stresses and nanoindentation testing of films and coatings by: (Electronic resources)

Computational plasticity for finite elements = a Fortran-based introduction / by: (Electronic resources)

Engineering mechanics.. 2,. Mechanics of materials by: (Electronic resources)

Hyperelasticity primer by: (Electronic resources)

The fracture mechanics of plant materials = wood and bamboo / by: (Electronic resources)

Mechanics of soccer heading and protective headgear by: (Electronic resources)

Basics of continuum plasticity by: (Electronic resources)

Nonlinear waves and pattern dynamics by: (Electronic resources)

Mechanical properties and working of metals and alloys by: (Electronic resources)

Introduction to linear elasticity by: (Electronic resources)

5th International Conference on Geofoam Blocks in Construction Applications = Proceedings of EPS 2018 / by: (Electronic resources)

Essentials of partial differential equations = with applications / by: (Electronic resources)

Engineering design applications by: (Electronic resources)

Thermal cracking of massive concrete structures = state of the art report of the RILEM Technical Committee 254-CMS / by: (Electronic resources)

Proceedings of the 7th International Conference on Fracture Fatigue and Wear = FFW 2018, 9-10 July 2018, Ghent University, Belgium / by: (Electronic resources)

Plasticity-damage couplings = from single crystal to polycrystalline materials / by: (Electronic resources)

Finite elements for truss and frame structures = an introduction based on the computer algebra system maxima / by: (Electronic resources)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Electronic resources)

Eigenvalue and Eigenvector problems in applied mechanics by: (Electronic resources)

Theory of vibration = an introduction / by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Mechanics of composite, hybrid and multifunctional materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 5 by: (Electronic resources)

Proceedings of International Conference on Intelligent Manufacturing and Automation = ICIMA 2018 / by: (Electronic resources)

Multiscale mechanobiology of bone remodeling and adaptation by: (Electronic resources)

Fracture, fatigue, failure and damage evolution. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics. Volume 6 : by: (Electronic resources)

The complete works of Gabrio Piola.. Volume II by: (Electronic resources)

Tensor algebra and tensor analysis for engineers = With Applications to Continuum Mechanics / by: (Electronic resources)

Evolution mechanism on structural characteristics of lead-contaminated soil in the solidification/stabilization process by: (Electronic resources)

Single piles in liquefiable ground = seismic response and numerical analysis methods / by: (Electronic resources)

Statics = learning from engineering examples / by: (Electronic resources)

Proper generalized decompositions = an introduction to computer implementation with Matlab / by: (Electronic resources)

The mechanobiology and mechanophysiology of military-related injuries by: (Electronic resources)

Computational statics and dynamics = an introduction based on the finite element method / by: (Electronic resources)

The finite element analysis program MSC Marc/Mentat = a first introduction / by: (Electronic resources)

Properties and characterization of modern materials by: (Electronic resources)

Fracture mechanics by: (Electronic resources)

Nanofabrication = principles, capabilities and limits / by: (Electronic resources)

Shell-like structures = advanced theories and applications / by: (Electronic resources)

Finite element and discontinuous Galerkin methods for transient wave equations by: (Electronic resources)

Fracture at all scales by: (Electronic resources)

Virtual work and shape change in solid mechanics by: (Electronic resources)

Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Experimental and applied mechanics. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 4 by: (Electronic resources)

Fracture, fatigue, failure and damage evolution. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 8 by: (Electronic resources)

Regenerative strategies for the treatment of knee joint disabilities by: (Electronic resources)

Non-classical continuum mechanics = a dictionary / by: (Electronic resources)

Bamboo = the multipurpose plant / by: (Electronic resources)

Statics of historic masonry constructions by: (Electronic resources)

Linear and non-linear mechanical behavior of solid materials by: (Electronic resources)

The role of mechanics in the study of lipid bilayers by: (Electronic resources)

Materials characterization and mechanism of micro-cutting in ultra-precision diamond turning by: (Electronic resources)