語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
切換:
標籤
|
MARC模式
|
ISBD
Economic Model Predictive Control an...
~
Durand, Helen E.
FindBook
Google Book
Amazon
博客來
Economic Model Predictive Control and Nonlinear Control Actuator Dynamics.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Economic Model Predictive Control and Nonlinear Control Actuator Dynamics./
作者:
Durand, Helen E.
出版者:
Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:
219 p.
附註:
Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
Contained By:
Dissertation Abstracts International78-10B(E).
標題:
Chemical engineering. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10284730
ISBN:
9781369832488
Economic Model Predictive Control and Nonlinear Control Actuator Dynamics.
Durand, Helen E.
Economic Model Predictive Control and Nonlinear Control Actuator Dynamics.
- Ann Arbor : ProQuest Dissertations & Theses, 2017 - 219 p.
Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
Thesis (Ph.D.)--University of California, Los Angeles, 2017.
Control valves are the most prevalent final control element in the chemical process industries. However, the behavior of valves (i.e., the manner in which the valve output flow rate changes in response to changes in the control signal to the valve) can contribute to a number of negative effects in a control loop, such as set-point tracking issues and sustained closed-loop oscillations. Valve stiction, for example, is a dynamic valve nonlinearity (i.e., the relationship between the valve output flow rate and the control signal to the valve is described by nonlinear differential equations) resulting from friction that is known to be problematic in the process industries. This dissertation describes the impact of valve behavior on process control loops and methods for compensating for the valve behavior through appropriate control designs. It begins by describing how the addition of input rate of change constraints to an optimization-based control design with a general objective function (economic model predictive control (EMPC)) can be performed in a manner that may reduce actuator wear while simultaneously guaranteeing feasibility of the controller and closed-loop stability of a nonlinear process operated under the control design. It then focuses on a specific type of actuator (a valve) and elucidates that coupled, nonlinear interactions between the process and valve model states and any internal states of the controller model create the negative effects that may be observed in control loops containing valves for which the dynamics cannot be neglected (e.g., valves subject to significant stiction). These multivariable interactions illustrate the closed-loop nature of the negative effects observed, and this closed-loop perspective is then used to analyze stiction compensation methods from the literature, to develop a novel stiction compensation scheme for control loops under proportional-integral control, and to demonstrate that incorporating models, both first-principles and empirical, of valve behavior within the model used for making state predictions in a model predictive controller is an effective means for compensating for valve behavior in general. The benefits of adding actuation magnitude and input rate of change constraints within EMPC including a model of stiction dynamics are discussed. Throughout the work, process examples are utilized to illustrate the advanced control-based frameworks for understanding and compensating for valve limitations.
ISBN: 9781369832488Subjects--Topical Terms:
560457
Chemical engineering.
Economic Model Predictive Control and Nonlinear Control Actuator Dynamics.
LDR
:03432nmm a2200289 4500
001
2122707
005
20170922124939.5
008
180830s2017 ||||||||||||||||| ||eng d
020
$a
9781369832488
035
$a
(MiAaPQ)AAI10284730
035
$a
AAI10284730
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Durand, Helen E.
$3
3284672
245
1 0
$a
Economic Model Predictive Control and Nonlinear Control Actuator Dynamics.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2017
300
$a
219 p.
500
$a
Source: Dissertation Abstracts International, Volume: 78-10(E), Section: B.
500
$a
Adviser: Panagiotis D. Christofides.
502
$a
Thesis (Ph.D.)--University of California, Los Angeles, 2017.
520
$a
Control valves are the most prevalent final control element in the chemical process industries. However, the behavior of valves (i.e., the manner in which the valve output flow rate changes in response to changes in the control signal to the valve) can contribute to a number of negative effects in a control loop, such as set-point tracking issues and sustained closed-loop oscillations. Valve stiction, for example, is a dynamic valve nonlinearity (i.e., the relationship between the valve output flow rate and the control signal to the valve is described by nonlinear differential equations) resulting from friction that is known to be problematic in the process industries. This dissertation describes the impact of valve behavior on process control loops and methods for compensating for the valve behavior through appropriate control designs. It begins by describing how the addition of input rate of change constraints to an optimization-based control design with a general objective function (economic model predictive control (EMPC)) can be performed in a manner that may reduce actuator wear while simultaneously guaranteeing feasibility of the controller and closed-loop stability of a nonlinear process operated under the control design. It then focuses on a specific type of actuator (a valve) and elucidates that coupled, nonlinear interactions between the process and valve model states and any internal states of the controller model create the negative effects that may be observed in control loops containing valves for which the dynamics cannot be neglected (e.g., valves subject to significant stiction). These multivariable interactions illustrate the closed-loop nature of the negative effects observed, and this closed-loop perspective is then used to analyze stiction compensation methods from the literature, to develop a novel stiction compensation scheme for control loops under proportional-integral control, and to demonstrate that incorporating models, both first-principles and empirical, of valve behavior within the model used for making state predictions in a model predictive controller is an effective means for compensating for valve behavior in general. The benefits of adding actuation magnitude and input rate of change constraints within EMPC including a model of stiction dynamics are discussed. Throughout the work, process examples are utilized to illustrate the advanced control-based frameworks for understanding and compensating for valve limitations.
590
$a
School code: 0031.
650
4
$a
Chemical engineering.
$3
560457
650
4
$a
Engineering.
$3
586835
690
$a
0542
690
$a
0537
710
2
$a
University of California, Los Angeles.
$b
Chemical Engineering 0294.
$3
2092146
773
0
$t
Dissertation Abstracts International
$g
78-10B(E).
790
$a
0031
791
$a
Ph.D.
792
$a
2017
793
$a
English
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10284730
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9333321
電子資源
01.外借(書)_YB
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入