東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Modeling and control of homogeneous ...

Chiang, Chia-Jui.

FindBook

Google Book

Amazon

博客來

Modeling and control of homogeneous charge compression ignition engines with high dilution.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Modeling and control of homogeneous charge compression ignition engines with high dilution./
作者:	Chiang, Chia-Jui.
面頁冊數:	102 p.
附註:	Source: Dissertation Abstracts International, Volume: 68-02, Section: B, page: 1247.
Contained By:	Dissertation Abstracts International68-02B.
標題:	Engineering, Automotive. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3253238

Modeling and control of homogeneous charge compression ignition engines with high dilution.
Chiang, Chia-Jui.

Modeling and control of homogeneous charge compression ignition engines with high dilution. - 102 p.

Source: Dissertation Abstracts International, Volume: 68-02, Section: B, page: 1247.

Thesis (Ph.D.)--University of Michigan, 2007.

Homogeneous charge compression ignition (HCCI) engines provide the benefits such as low NOx emission and high fuel efficiency. Control of the HCCI engine, however, is difficult since its ignition cannot be directly actuated. Controlled autoignition requires regulation of the charge properties, especially charge temperature, as observed by many experimental results and substantiated in this thesis. To facilitate the control analysis and development, this thesis first introduce a physics-based cycle-to-cycle model of' a gasoline HCCI engine with an internal feedback loop constituted by the recirculation of exhaust gas. One important assumption in our modeling work that propagates down to the multiplicity analysis and controller synthesis is that the charge composition does not affect combustion (autoignition timing, burn duration, combustion efficiency, etc). This assumption is validated by the dominance of thermal dynamics revealed by sensitivity analysis and balanced realization of plant linearizations. Good agreement with experimental data suggests that the charge composition effects probably are of secondary importance, at least, for the regulation of the crank angle of 50% fuel burned (theta CA50). Based on the balanced truncation of the linearized model, a decentralized feedback and cancellation feedforward controller is designed. This linear controller has minimal complexity and care be tuned using classical PID design rules or real-time identification. The impact of the: nonlinear temperature dynamics in the internal feedback loop is then investigated by using the returning maps. The returning maps reveal the existence of stable and unstable equilibria of the cycle-to-cycle thermal dynamics. In the end, a nonlinear observer-based feedback controller is developed to stabilize the cycle-to-cycle temperature dynamics and regulate the combustion timing during large load transitions within the HCCI operating range. Simulations and estimates of the region of attraction show that the designed controller is robust to uncertainties such as the manifold filling dynamics, exhaust runner heat transfer, the cycle-to-cycle variation of theta CA50 and the uncertainty in the nonlinearity of the temperature dynamics.Subjects--Topical Terms:

1018477
Engineering, Automotive.

Modeling and control of homogeneous charge compression ignition engines with high dilution.
LDR:03130nmm 2200265 4500 001 1829404
005 20071107102552.5
008 130610s2007 eng d
035 $a (UMI)AAI3253238
035 $a AAI3253238
040 $a UMI $c UMI
100 1 $a Chiang, Chia-Jui. $3 1918264
245 1 0 $a Modeling and control of homogeneous charge compression ignition engines with high dilution.
300 $a 102 p.
500 $a Source: Dissertation Abstracts International, Volume: 68-02, Section: B, page: 1247.
500 $a Adviser: Anna G. Stefanopoulou.
502 $a Thesis (Ph.D.)--University of Michigan, 2007.
520 $a Homogeneous charge compression ignition (HCCI) engines provide the benefits such as low NOx emission and high fuel efficiency. Control of the HCCI engine, however, is difficult since its ignition cannot be directly actuated. Controlled autoignition requires regulation of the charge properties, especially charge temperature, as observed by many experimental results and substantiated in this thesis. To facilitate the control analysis and development, this thesis first introduce a physics-based cycle-to-cycle model of' a gasoline HCCI engine with an internal feedback loop constituted by the recirculation of exhaust gas. One important assumption in our modeling work that propagates down to the multiplicity analysis and controller synthesis is that the charge composition does not affect combustion (autoignition timing, burn duration, combustion efficiency, etc). This assumption is validated by the dominance of thermal dynamics revealed by sensitivity analysis and balanced realization of plant linearizations. Good agreement with experimental data suggests that the charge composition effects probably are of secondary importance, at least, for the regulation of the crank angle of 50% fuel burned (theta CA50). Based on the balanced truncation of the linearized model, a decentralized feedback and cancellation feedforward controller is designed. This linear controller has minimal complexity and care be tuned using classical PID design rules or real-time identification. The impact of the: nonlinear temperature dynamics in the internal feedback loop is then investigated by using the returning maps. The returning maps reveal the existence of stable and unstable equilibria of the cycle-to-cycle thermal dynamics. In the end, a nonlinear observer-based feedback controller is developed to stabilize the cycle-to-cycle temperature dynamics and regulate the combustion timing during large load transitions within the HCCI operating range. Simulations and estimates of the region of attraction show that the designed controller is robust to uncertainties such as the manifold filling dynamics, exhaust runner heat transfer, the cycle-to-cycle variation of theta CA50 and the uncertainty in the nonlinearity of the temperature dynamics.
590 $a School code: 0127.
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0540
690 $a 0548
710 2 0 $a University of Michigan. $3 777416
773 0 $t Dissertation Abstracts International $g 68-02B.
790 1 0 $a Stefanopoulou, Anna G., $e advisor
790 $a 0127
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3253238